Epson S5U13781R00C10M Bedienungsanleitung

SEIKO EPSON CORPORATION Rev. 1.0

S5U13781R00C10M

User Manual

Document Number: X94A-G-008-01

Status: Revision 1.0

Issue Date: 2012/09/25

Page 2

S5U13781R00C10M User Manual X94A-G-008-01

Revision 1.0 Issue Date: 2012/09/25

Seiko Epson Corporation

Evaluation board/kit and Development tool important notice

1. This evaluation board/kit or development tool is designed for use for engineering evaluation,

demonstration, or development purposes only. Do not use it for other purpose. It is not intended to

meet the requirement of design for finished product.

2. This evaluation board/kit or development tool is intended for use by an electronics engineer, and it is

not a consumer product. The user should use these goods properly and safely. Seiko Epson dose not

assume any responsibility and liability of any kind of damage and/or fire caused by usage of it. The

user should cease to use it when any abnormal issue occurs, even during proper and safe use.

3. The parts used for this evaluation board/kit or development tool may change without notice.

NOTICE

No part of this material may be reproduced or duplicated in any form or by any means without the written permission of Seiko

Epson. Seiko Epson reserves the right to make changes to this material without notice. Seiko Epson does not assume any

liability of any kind arising out of any inaccuracies contained in this material or due to its application or use in any product or

circuit and, further, there is no representation that this material is applicable to products requiring high level reliability, such as,

medical products. Moreover, no license to any intellectual property rights is granted by implication or otherwise, and there is no

representation or warranty that anything made in accordance with this material will be free from any patent or copyright

infringement of a third party. This material or portions thereof may contain technology or the subject relating to strategic

products under the control of the Foreign Exchange and Foreign Trade Law of Japan and may require an export license from the

Ministry of Economy, Trade and Industry or other approval from another government agency.

All brands or product names mentioned herein are trademarks and/or registered trademarks of their respective companies.

Page 3

X94A-G-008-01 S5U13781R00C10M User Manual

Issue Date: 2012/09/25 Revision 1.0

Seiko Epson Corporation

Table of Contents

1Introduction......................................................................................................................... 4

2LCD Module Options and Parts Lists .................................................................................. 6

3Connecting the Boards........................................................................................................ 7

4StellarisWare Drivers and Demo Software.........................................................................10

4.1 Requirements..............................................................................................................................10

4.1.1 Hardware Requirements .....................................................................................................10

4.1.2 Software Requirements.......................................................................................................10

4.2 Software Installation....................................................................................................................10

4.3 Software Description...................................................................................................................12

4.3.1 Driver Software....................................................................................................................12

4.3.2 Demonstration Software......................................................................................................13

4.4 Software Modification..................................................................................................................13

4.5 Software License.........................................................................................................................13

5Stellaris LM4F120 Launchpad Connections.......................................................................14

6Pinout for 40-Pin LCD Interface .........................................................................................16

7Pinout for 54-Pin LCD Interface .........................................................................................18

8S5U13781M00C100 Schematics.......................................................................................22

9S5U13781M00C100 Board Layout.....................................................................................26

10 References ........................................................................................................................30

11 Change Record..................................................................................................................31

Page 4

S5U13781R00C10M User Manual X94A-G-008-01

Revision 1.0 Issue Date: 2012/09/25

Seiko Epson Corporation

1 Introduction

The S5U13781R00C10M is the S1D13781 BoosterPack LCDC Development Package. It is a

BoosterPack board set for TI’s Stellaris LM4F120 Launchpad for evaluating and developing embedded

LCD display applications using the Epson S1D13781 LCD Controller IC.

The S5U13781R00C10M consists of the following two items:

S5U13781R00C100 Reference Board Set

S5U13781M00C100 Signal Adapter Board Set

Figure 1 shows a picture of the S5U13781R00C100 Reference Board Set.

Figure 1 –S5U13781R00C100 Reference Board Set

The S5U13781R00C100 Reference Board Set consists of two break-off sub-boards:

Main board which has the S1D13781 LCD Controller, 2Mbytes of Serial Flash, DC/DC converter

for LED backlight, 2x25 connector for Host interface (J4), and 2x25 connector for LCD interface

(J5).

LCD interface board which has a 54-pin FPC (flexible printed circuit) connector (J8) to connect

to LCD module and 0.1”-pitch 2x25+2x6 connectors (J9 and J10).

For more information about the S5U13781R00C100, please refer to the “S5U13781R00C100 Reference

Board User Manual”, document number X94A-G-004-01

Page 5

X94A-G-008-01 S5U13781R00C10M User Manual

Issue Date: 2012/09/25 Revision 1.0

Seiko Epson Corporation

Figure 2 shows a picture of the S5U13781M00C100 Signal Adapter Board Set.

Figure 2 –S5U13781M00C100 Signal Adapter Board Set

The S5U13781M00C100 Signal Adapter Board Set is a supplement to the S5U13781R00C100 Reference

Board Set and it consists of three break-off sub-boards (schematics and layout are in Sections 8 and 9):

“Board A –Host Interface Adapter”is used to adapt the S5U13781R00C100 Main Board’s Host

Interface signals (P5) to the Stellaris LM4F120 Launchpad BoosterPack connectors (P1 to P4),

and it also routes the S5U13781R00C100 Main Boards’ LCD Interface signals (P9) to a

connector (J2) for connecting to either “Board B – LCD Signal Adapter –40Pin” or “Board C –

LCD Signal Adapter –54Pin”.

“Board B –LCD Signal Adapter –40Pin”provides signal routing for connecting to an LCD

module with a 40-pin FPC (4.3” WQVGA). One side (PB1) connects to J2 of Board A and the

other side (PB2) connects to J9 of the S5U13781R00C100 LCD interface board.

“Board C –LCD Signal Adapter –54Pin”provides signal routing for connecting to an LCD

module with a 54-pin FPC (3.5” QVGA). One side (PC1) connects to J2 of Board A and the

other side (PC2+PC3) connects to J9+J10 of the S5U13781R00C100 LCD interface board.

This user manual is updated as appropriate. Please check the Seiko Epson Website at

http://www.epson.jp/device/semicon_e/product/lcd_controllers/index.htm for the latest revision of this

document before beginning any development.

We appreciate your comments on our documentation. Please contact us via email at

documentation@erd.epson.com.

Page 6

S5U13781R00C10M User Manual X94A-G-008-01

Revision 1.0 Issue Date: 2012/09/25

Seiko Epson Corporation

2 LCD Module Options and Parts Lists

The S5U13781R00C10M development package can interface to two types of LCD modules. One type of

LCD module has a 40-pin FPC interface (4.3” WQVGA display) and the other type has a 54-pin FPC

interface (3.5” QVGA).

The boards in the S5U13781R00C10M package do not come with any header/receptacle connectors

installed. These connectors will have to be purchased separately and soldered to the boards by the end-

user.

The following table shows the two LCD module options and their parts list (with manufacturer part

numbers):

40-Pin Interface

54-Pin Interface

Manufacturer Part Number

S5U13781R00C10M

Epson S5U13781R00C10M

2x25, 0.1”-pitch header

3M 961250-6404-AR

2x25, 0.1”-pitch receptacle

3M 929975-01-25-RK

2x10, 0.1”-pitch receptacle

3M 929975-01-10-RK

2x3, 0.1”-pitch header

3M 929836-01-03-RK

2x3, 0.1”-pitch receptacle

3M 929975-01-03-RK

54-Pin, 3.5”, QVGA LCD

Newhaven Display

NHD-3.5-320240MF-ATXL#-1 or

Hantronix HDA351-LV

Evervision VGG322425-6UFLWA or

Topway LMT035KDH03 or

Tianma TM035KDH03 or

All Shore ASI-T-350EA3NN/D or

Powertip PH320240T-006-I-Q or

Ampire AM320240L2TMQW-TB0H or

Logic Tech. LTTD320240035-L1RT or

US Micro USMP-TT035Q-01D or

Tech Toys LVC75Z779V2S or

Microtips MTF-TQ35SP741-AV

40-Pin, 4.3”, WQVGA LCD

Newhaven Display

NHD-4.3-480272EF-ATXL#(-T) or

All Shore ASI-T-430FA6NT/H or

AZ Displays ATM0430D5(-T) or

Logic Tech. LTTD480272043-L1 or

Tianma TM043NBH02

NOTE: The Stellaris LM4F120 Launchpad board is not included in the parts list and will have to be

purchased separately if the end-user does not already have one.

Page 7

X94A-G-008-01 S5U13781R00C10M User Manual

Issue Date: 2012/09/25 Revision 1.0

Seiko Epson Corporation

3 Connecting the Boards

Figure 3 shows the board connections diagram (side view) for the S5U13781R00C10M BoosterPack

LCDC Development Package.

Figure 3 –Board Connections Diagram

The Stellaris LM4F120 Launchpad board has 2x10 headers on the top side for J1/J3 and J2/J4.

J8 of the S5U13781R00C100 LCD Interface Board is an FPC connector with bottom side contacts. The

FPC of the LCD module should be inserted into J8 with contacts facing down and pin 1 lined up with the

pin 1 edge of J8 (see Figure 4).

Figure 4 –J8 FPC Connection Example for 40-Pin LCD Module

(Side View)

Stellaris LM4F120

Launchpad

Board

S5U13781R00C100

Main Board

S5U13781M00C100

Board A

LCD Module

PB1 or

PC1

S5U13781M00C100

Board B or

Board C

PB2 or

PC2

PC3

S5U13781R00C100

LCD Interface Board

J10

J8 Pin 1

FPC Pin 1

(contacts face down)

Page 8

S5U13781R00C10M User Manual X94A-G-008-01

Revision 1.0 Issue Date: 2012/09/25

Seiko Epson Corporation

STEPS FOR ASSEMBLING S5U13781R00C10M DEVELOPMENT PACKAGE

Modification to Stellaris LM4F120 Launchpad Board

1) On the Stellaris LM4F120 Launchpad board, remove (de-solder) resistors R9 and R10. This

disconnects the short-circuits between GPIO ports PB6/PD0 and PB7/PD1.

Soldering of Header and Receptacles

2) On the S5U13781R00C100 Main Board, connect pins 3 and 4 of J3 (solder a wire across the two

pins or solder a header with shunt jumper) to set the current of the backlight LED driver to 20mA.

The Newhaven 3.5” display is rated at 20mA typical and the Newhaven 4.3” display is rated at

32mA typical. (Current drive can be increased in steps of 20mA by shorting pins 5-6 and pins 7-

8 of J3.)

3) On the S5U13781R00C100 Main Board, connect pins 1 and 2 of J1 (solder a wire across the two

pins or solder a header with shunt jumper) to connect power for the Serial Flash.

4) On the bottom side of the S5U13781R00C100 Main Board, install and solder 2x25 headers for

J4 and J5.

5) On the top side of the S5U13781M00C100 Board A, install and solder 2x25 receptacles for P5

and P9.

6) On the bottom side of the S5U13781M00C100 Board A, install and solder 2x10 receptacles for

P1+P3 and P2+P4. (Note that P1 and P3 together make up one 2x10 receptacle and P2 and P4

together make up the other 2x10 receptacle.)

7) On the bottom side of the S5U13781M00C100 Board A, install and solder a 2x25 header for J2.

8) For a 40-pin (4.3”, WQVGA) LCD module, use S5U13781M00C100 Board B and install (on the

top side) 2x25 receptacles for PB1 and PB2. For a 54-pin (3.5”, QVGA) LCD module, use

S5U13781M00C100 Board C and install (on the top side) 2x25 receptacles for PC1 and PC2 as

well as a 2x3 receptacle for PC3.

9) On the bottom side of the S5U13781R00C100 LCD Interface Board, install and solder a 2x25

header for J9. If using a 54-pin LCD module, a 2x3 header for J10 should also be installed and

soldered on the bottom side of the S5U13781R00C100 LCD Interface Board.

Page 9

X94A-G-008-01 S5U13781R00C10M User Manual

Issue Date: 2012/09/25 Revision 1.0

Seiko Epson Corporation

Assembly of Boards

10) Plug the bottom 2x10 receptacles of S5U13781M00C100 Board A to the Stellaris LM4F120

Launchpad 2x10 headers. Make sure the pin 1s of P1-P4 of S5U13781M00C100 Board A line

up with pin1s of J1-J4 of the Stellaris LM4F120 Launchpad.

11) Plug the bottom headers (J4, J5) of S5U13781R00C100 Main Board to the top side receptacles

(P5, P9) of S5U13781M00C100 Board A. Make sure the pin 1s of J4 and J5 of the

S5U13781R00C100 Main Board line up with the pin1s of P5 and P9 of S5U13781M00C100

Board A.

12) Plug the 2x25 receptacle (PB1/PC1) of S5U13781M00C100 Board B/C to J2 (2x25 header) on

the bottom side of S5U13781M00C100 Board A. Make sure pin 1 of J2 of S5U13781M00C100

Board A lines up with pin 1 of PB1/PC1 of S5U13781M00C100 Board B/C.

13) Plug the bottom headers (J9, J10) of the S5U13781R00C100 LCD Interface Board to the top

side receptacles (PB2/PC2, PC3) of S5U13781M00C100 Board B/C.

14) Connect the LCD module’s FPC to J8 of the S5U13781R00C100 LCD Interface Board. Make

sure the pads/contacts side of the FPC are facing down and pin 1 of the FPC lines up with the pin

1 edge of J8 (please refer to Figure 4).

Page 10

S5U13781R00C10M User Manual X94A-G-008-01

Revision 1.0 Issue Date: 2012/09/25

Seiko Epson Corporation

4 StellarisWare Drivers and Demo Software

The S1D13781 BoosterPack LCDC Development Package was developed with a companion software

package that is available from the Epson website at vdc.epson.com. This software package includes a

S1D13781 demonstration application and graphics library driver software source code intended for use in

combination with TI StellarisWare and the Stellaris LM4F120 Launchpad.

4.1 Requirements

4.1.1 Hardware Requirements

The S1D13781 BoosterPack LCDC Development Package software was developed for use with the

following hardware.

Stellaris LM4F120 Launchpad

S5U13781R00C10M

Compatible LCD Display

For details on preparing the hardware for use, see Section Error! Reference source not found., Error!

ference source not found..

4.1.2 Software Requirements

The S1D13781 BoosterPack LCDC Development Package software was developed for use with the

following software tools.

Code Composer Studio –see http://www.ti.com/tool/ccstudio

StellarisWare –see http://www.ti.com/stellaris

ICDI USB drivers (for debugging) –see http://www.ti.com/tool/stellaris_icdi_drivers

4.2 Software Installation

The following steps are required to install the S1D13781 BoosterPack LCDC Development Package

software and the required software tools. If the TI software tools have already been installed, skip to step

Note:

The following instructions assume a PC running Windows XP (or higher). For compatibility with other

operating systems or development platforms, please refer to TI’s website at http://www.ti.com/stellaris.

1. Install the Code Composer Studio IDE.

2. Install StellarisWare

3. Connect the Launchpad to the PC via a USB connector. When prompted, install the Stellaris ICDI

drivers. On some systems, the drivers must be manually installed using the Windows Device

Manager.

4. Extract the S1D13781 BoosterPack software into the StellarisWare working folder for the

Launchpad board model being used (i.e. C:/StellarisWare/boards/ek-lm4f120xl/).

5. Open Code Composer Studio.

Inhaltsverzeichnis

Andere Epson Hauptplatine Handbücher

Epson

Epson S5U13L02P00C100 Bedienungsanleitung

Epson

Epson S5U13L01P00C100 Bedienungsanleitung

Epson

Epson S5U13706P00C100 Bedienungsanleitung

Epson

Epson S5U13705B00C Bedienungsanleitung

Epson

Epson S5U1C17602T1100 Montageanleitung

Epson

Epson S5U13A05B00C Bedienungsanleitung

Epson

Epson S5U13781R01C100 Bedienungsanleitung

Epson

Epson S5U13700B00C Bedienungsanleitung

Epson

Epson S5U13705B00C Bedienungsanleitung

Epson

Epson S1D13C00 Bedienungsanleitung

Epson

Epson S1S65010 Bedienungsanleitung

Epson

Epson S5U13L01P00C100 Bedienungsanleitung

Epson

Epson S5U13700B00C Bedienungsanleitung

Epson

Epson S1D13709 Bedienungsanleitung

Epson

Epson S1D13743 Bedienungsanleitung

Epson

Epson S1V3034x Series Leitfaden

Epson

Epson S5U13515P00C100 Bedienungsanleitung

Epson

Epson S5U13706B00C Bedienungsanleitung

Epson

Epson S1V30120 Bedienungsanleitung

Epson

Epson S1R72V18 Bedienungsanleitung

Epson

Epson S1V30000 Series Benutzerhandbuch

Epson

Epson S1V30333 Bedienungsanleitung

Epson

Epson S5U13C00P00CX00 Bedienungsanleitung

Epson

Epson S5U13A05B00C Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Biostar

Biostar M7VIT Bravo Bedienungs- und Montageanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung