Epson 4000 - Stylus Pro Color Inkjet Printer Bedienungsanleitung

English

Setup Guide

Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Assembling the printer . . . . . . . . . . . . . . . . . . . . . . 4

Setting up the printer. . . . . . . . . . . . . . . . . . . . . . . . 5

Connecting the Printer with Your Computer. . . . 11

Installing the Printer Software and

EPSON Printer Service Utility 2. . . . . . . . . . 13

Using the User Guides . . . . . . . . . . . . . . . . . . . . . . 14

electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. The

information contained herein is designed only for use with this Epson printer. Epson is not responsible for any use of this information as applied

to other printers.

Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or

expenses incurred by the purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications,

repairs, or alterations to this product, or (excluding the U.S.) failure to strictly comply with Seiko Epson Corporation's operating and maintenance

instructions.

Seiko Epson Corporation shall not be liable for any damages or problems arising from the use of any options or any consumable products other

than those designated as Original Epson Products or EPSON Approved Products by Seiko Epson Corporation.

Seiko Epson Corporation shall not be held liable for any damage resulting from electromagnetic interference that occurs from the use of any

interface cables other than those designated as EPSON Approved Products by Seiko Epson Corporation.

EPSON is a registered trademark and EPSON STYLUS are trademarks of Seiko Epson Corporation.

Microsoft and Windows are registered trademarks of Microsoft Corporation.

Apple and Macintosh are registered trademarks of Apple Computer, Inc.

General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. EPSON disclaims

any and all rights in those marks.

English

Safety Instructions

Read all of these instructions before using your

printer. Also be sure to follow all warnings and

instructions marked on the printer.

Warning, Cautions, and Notes

wWarnings must be followed carefully to avoid

bodily injury.

cCautions must be observed to avoid damage to

your equipment.

Notes contain important information and useful tips

on the operation of your printer.

When choosing a place for this product

❏Place this product on a flat, stable surface that

is larger than this product. This product will

not operate properly if it is tilted or at an angle.

❏Avoid places subject to rapid changes in

temperature and humidity. Also keep it away

from direct sunlight, strong light, or heat

sources.

❏Avoid places subject to shocks and vibrations.

❏Keep this product away from dusty areas.

❏Place this product near a wall outlet where the

plug can be easily unplugged.

❏If you use a stand, the stand has to support at

least 50 kg (110.3 lb).

When setting up this product

❏Use only the type of power source indicated

on this product’s label.

❏Use only the power cord that comes with this

product. Use of another cord may result in fire

or electric shock.

❏This product’s power cord is for use with this

product only. Use with other equipment may

result in fire or electric shock.

❏Do not use a damaged or frayed power cord.

❏If you use an extension cord with this product,

make sure the total ampere rating of the

devices plugged into the extension cord does

not exceed the cord’s ampere rating. Also,

make sure the total ampere rating of all

devices plugged into the wall outlet does not

exceed the wall outlet’s ampere rating.

❏Do not block or cover the openings in this

product’s cabinet.

When using this product

❏Do not put your hand inside this product or

touch the ink cartridges during printing.

❏Do not move the print head by hand;

otherwise you may damage this product.

❏Do not insert objects through the slots. Take

care not to spill liquid on this product.

❏Do not attempt to service this product

yourself.

❏Unplug this product and refer servicing to

qualified service personnel under the

following conditions:

Th e p o wer cord or p l u g is dam aged ; l iqu i d h a s

entered this product; this product has been

dropped or the cabinet damaged; this product

does not operate normally or exhibits a

distinct change in performance.

40 cm

or more

15 cm

or more 35 cm

or more

15 cm

or more

When handling the ink cartridges

❏Keep ink cartridges out of the reach of

children and do not drink.

❏Store ink cartridges in a cool, dark place.

❏If ink gets on your skin, wash it off with soap

and water. If it gets in your eyes, flush them

immediately with water.

❏Shake the ink cartridge gently before

installing it for best results.

cCaution:

Do not shake cartridges that have been

installed previously.

❏Do not use an ink cartridge beyond the date

printed on the cartridge carton.

❏Use up the ink cartridge within six months of

installation for best results.

❏Do not dismantle the ink cartridges or try to

refill them. This could damage the print head.

❏Do not touch the ink supply port or

surrounding area and the green IC chip on the

side of the ink cartridge. This may affect

normal operation and printing.

Assembling the printer

Checking the contents

Make sure that all of the items shown are included,

and are not damaged.

Note:

The contents in the printer box vary by location.

Removing the protective materials

To prevent damage during shipping, several

pieces of protective material are packed with your

printer. Remove those from your printer.

You also need to unlock the print head, by pulling

the green tab on the left side of the print head.

Printer

Ink cartridges

Power cord

Roll paper spindle and gray attachments for

roll paper with 3-inch core

Spacer

Paper tray

English

Setting up the printer

Connecting the power cord

1. Check the label on the back of the printer to

make sure the voltage required by the printer

matches that of the power outlet you will be

pulled it into. Also, make sure that you have

the correct power cable for your power source.

cCaution:

It is not possible to change the printer’s

voltage. If the rated voltage and your outlet

voltage do not match, do not plug in the

power cord, and contact your dealer for

assistance.

2. Connect the power cord to the AC inlet on the

back of the printer.

3. Plug the power cord into a properly grounded

electrical outlet.

cCaution:

Do not use an outlet that is controlled by an

automatic timer or wall switch. Otherwise,

accidental shut down or damage to your

printer may occur.

Installing the paper tray

Insert the paper tray into the slots at the front of

the printer.

Installing the Ink Cartridges

wWarning:

The ink cartridges are self-contained units.

Under ordinary use, ink will not leak from the

cartridges. If ink does get on your hands, wash

them thoroughly with soap and water. If ink gets

into your eyes, flush them immediately with

water.

Note:

❏The ink cartridges packed with your printer are

only for the initial ink charging.

❏Because the initial ink charging consumes a large

quantity of ink, you may need to replace the ink

cartridges soon.

❏The initial ink charging requires approximately 8

minutes.

❏The UltraChrome ink cartridges for Stylus Pro

7600/9600 can also be used with this printer.

AC inlet

❏Each slot can hold a particular color of ink. Be sure

to install the ink cartridges in the correct slot

according to the ink mode you choose.

1. Turn on the printer by pressing the Power

button. After a short time NO INK CRTG is

displayed on the LCD.

2. Open the ink compartment cover by pushing

it.

3. Raise the ink levers.

4. Remove the package from an ink cartridge,

and shake the ink cartridge gently.

5. Holding the ink cartridge with arrow mark

face-up and pointing to the rear of the printer,

and insert it into the slot.

6. Repeat steps 4 to 5 for the other seven ink

cartridges.

No. Photo Quality Ink Set High Speed Ink Set

#1 Matte Black Matte Black

#2 Cyan Cyan

#3 Magenta Magenta

#4 Yellow Yellow

#5 Photo Black Matte Black

#6 Light Cyan Cyan

#7 Light Magenta Magenta

#8 Light Black Yellow

1234 5678

English

7. After inserting all ink cartridge into each slot,

lower the ink lever. The printer starts initial

ink charging.

8. After approximately 2 minutes, ink lever

messages appear on the LCD. When a

message appears on the LCD, raise or lower

the ink levers accordingly until READY appears

on the LCD.

cCaution:

Never do the following while the Pause light

is flashing; otherwise, damage may occur.

❏Turn off the printer.

❏Open the top cover.

❏Remove the rear cover.

❏Move the paper lever to the released

position.

❏Remove the ink cartridges.

❏Remove the maintenance tank.

❏Unplug the power cord.

9. When READY appears on the LCD, the initial

ink charging is completed. Close the ink

compartment covers.

Note:

If you have installed 220 ml ink cartridges, do not

close the ink compartment covers.

Loading the Roll Paper

Attaching the roll paper to the spindle

When installing the roll paper onto the spindle,

follow these steps.

1. Slide the movable flange off the end of the

spindle.

2. When attaching roll paper with a 3-inch core,

keep the gray attachments attached.

If you are attaching roll paper with a 2-inch

core, remove them from the spindle.

Note:

Keep them in a safe place for future use.

3. Place the roll paper on a flat surface so that it

does not unwind. Slide the roll paper onto the

spindle and onto the flange until it fixes into

place.

Note:

Do not stand the spindle when attaching the roll

paper. It may cause a slant paper feeding.

4. Slide the movable flange (removed in step 1)

onto the spindle and into the end of the roll

paper until it fixes into place.

Attaching the spindle to the printer

To attach the paper loaded spindle to the printer,

follow these steps.

1. Open the roll paper cover.

2. Raise the roll paper support.

3. Make sure that the movable flange is fixed into

the end of the roll paper properly.

4. Hold the roll paper spindle so that the black

movable flange is on the left side. Then place

the spindle on the groove on top of the printer

once.

5. Move the paper lever to the released position.

6. Hold the both sides of the paper, and load the

paper into the paper insertion slot.

7. Pull the paper until it hangs down over the

paper tray.

Note:

If you load thin paper, press the Paper Feed

button to decrease the value of paper suction. If you

load thick and curled paper, press the Paper Feed

button to increase the value of paper suction.

English

8. Hold the both fixed and movable flanges, and

rewind the paper to the line marked with

A4/B4.

9. Move the paper lever to the secured position.

The printer automatically feeds the paper to

the printing position.

10. Extend the paper tray and paper tray cover

according to the paper size.

11. Close the roll paper cover.

12. Press the Paper Source button to select Roll

Auto Cut On on the LCD.

Loading the Cut Sheet

To install the cut sheet media to the paper tray,

follow these steps.

Note:

The method for loading the cut sheets described in this

section is for paper smaller than A3 size. If you want to

load A3 or larger paper, or if you want to know the

details of paper handling, see the "Paper Handling"

section in the Reference Guide included on the Printer

Software for EPSON STYLUS PRO 4000 CD-ROM

shipped with your printer.

1. Make sure that the printer is on and in the

READY status.

2. Lift up the paper tray cover, and pull the paper

guide roller up.

3. Raise the paper guide, and slide the edge

guide to the left as far as it will go.

4. Thumb through a stack of paper, then tap it on

a flat surface to even the edges.

If your paper is curled, flatten it before you

load it. If it curls excessively and jams

frequently, stop using it.

5. Clean the inside of the tray to remove any

dust. Dust may decrease printout quality.

6. Load the sheets with the printable face down

and the right edge of the paper resting against

the right side of the paper tray.

Note:

❏Always set the paper in portrait.

❏Make sure the sheets lie flat on the bottom of

the tray, and put the edge of the paper against

the right inner corner of the paper tray.

Otherwise, the printing may become

misaligned.

❏The loadable capacity of paper in the paper tray

differs according to the media and its size.

The paper tray can hold up to 250-sheets of 17

lb. or 64 g/m² plain paper. Do not load paper

above the arrow mark on the inside surface of

the right edge guide.

For information on the loadable capacity of

Epson special media, see the following table.

Epson special

media

Size Loadablecapacity

in the paper tray

EPSON Premium

Semigloss Photo

Paper

A4 100

A3 50

Super A3 50

Super B 50

EPSON Luster

Photo Paper

LTR 100

A3 50

Super B 50

EPSON New Photo

Quality Ink Jet

Paper

A4 200

A3 100

Super A3/B 100

A2 50

LTR 200

EPSON Proofing

Paper Semimatte

Super A3 50

EPSON Archival

Matte Paper

A4 100

LTR 100

A3 50

Super A3 50

EPSON Watercolor

Paper-Radiant

White

Super A3 20

Super B 20

EPSON Bright

White Inkjet Paper

A4 100

Andere Handbücher für 4000 - Stylus Pro Color Inkjet Printer

Inhaltsverzeichnis

Andere Epson Drucker Handbücher

Epson

Epson LQ-1070+ Installations- und Betriebshandbuch

Epson

Epson ActionLaser 1600 Bedienungsanleitung

Epson

Epson Stylus COLOR 3000 Bedienungsanleitung

Epson

Epson WF-C17590 Series Bedienungsanleitung

Epson

Epson PictureMate PM 215 Bedienungsanleitung

Epson

Epson 10600 - Stylus Pro Color Inkjet Printer Bedienungsanleitung

Epson

Epson SC-F3000 Series Bedienungsanleitung

Epson

Epson WF-7710 series Bedienungsanleitung

Epson

Epson L3250 Bedienungsanleitung

Epson

Epson LQ-1150 II Bedienungsanleitung

Epson

Epson OT-CU40 Bedienungsanleitung

Epson

Epson TM-C3500 Series Bedienungsanleitung

Epson

Epson Office BX310FN Series Montageanleitung

Epson

Epson DLQ-3000 Minerva+ Bedienungsanleitung

Epson

Epson Stylus Pro 9000 - Print Engine Bedienungsanleitung

Epson

Epson PLQ-20 Bedienungsanleitung

Epson

Epson WorkForce K101 Bedienungsanleitung

Epson

Epson TM-J8000 Bedienungsanleitung

Epson

Epson Stylus Pro 4400 Bedienungsanleitung

Epson

Epson SureColor P6570 Series Bedienungsanleitung

Epson

Epson Stylus Pro 4800 Portrait Edition Bedienungsanleitung

Epson

Epson Stylus Pro 4900 Bedienungsanleitung

Epson

Epson FX 890 Bedienungsanleitung

Epson

Epson L800 Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Brother

Brother 1440 - HL B/W Laser Printer Kurzanleitung

Fuji Xerox

Fuji Xerox DocuPrint P375 dw Bedienungsanleitung

WOOSIM

WOOSIM PORTI-S30 Bedienungsanleitung

Olivetti

Olivetti PG L2140 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 224e Bedienungsanleitung

Canon

Canon LBP113w Bedienungsanleitung

Xerox

Xerox DocuColor 5000 Bedienungsanleitung

Canon

Canon PRO-500 Series Einrichtungshandbuch

Lexmark

Lexmark Infoprint 1332 Bedienungsanleitung