Epson 7800 - Stylus Pro Color Inkjet Printer Bedienungsanleitung

Epson Stylus® Pro 7800/9800

QUICK REFERENCE GUIDE

Printed in USA

CPD-20272

Control Panel Lights and Buttons

Menu button

Hold for 3 seconds to

clean the print head.

Paper Feed down button

Left arrow or Paper

Source button

Pause light

and button

Hold for 3 seconds

to cancel a print job

or reset the printer.

Power light

and button

Paper Feed up button

Enter button

Hold for 3 seconds

to cut roll paper after

printing.

Paper light Ink light

Maintenance

tank gauge

Ink cartridge

gauges

SP7898_QRGcvr.indd 1 7/29/05 11:47:16 AM

Loading Roll Paper

1 Slide the black paper stop off the end of

the spindle.

Note: To use paper with a 3-inch core, attach the

gray adapters to the paper stops at each end.

See your Printer Guide for details.

2 Position the roll as shown, then slide it onto

the spindle.

3 Slide the black paper stop back onto the spindle and

insert it ﬁrmly into the end of the roll.

4 Open the roll paper cover.

5 Place the roll paper in the printer as shown. (The

black end of the spindle goes on the left.)

6 Make sure the printer is turned on, then press the

Paper Source button until the or icon

appears.

7 Release the paper lever.

8 Feed the paper into the slot and pull it all the way

through.

9 Turn the roll back to remove any slack. Then align

the bottom edge with the horizontal line and the

right edge with the vertical line.

10 Return the paper lever to the locked position. Then

close the roll paper cover.

11 Press the Pause button. The paper feeds into

printing position.

Caution: To prevent creasing the paper, remove it

from the paper path and roll it up when you’re not

printing.

SP7898_QRGin_CPD20272.indd 1 8/5/05 10:15:28 AM

Printing on Posterboard

When you print on posterboard or other thick media

(more than 19 mil thick), you should open the front

cover before loading as described below.

1 Make sure the printer is on and the roll paper cover

is closed.

2 Press the Paper Source button until the icon

appears on the LCD.

3 Release the paper lever.

Loading and Using Cut Sheet Paper

1 Remove any roll paper from the paper path. Make

sure the printer is on and the roll paper cover is

closed.

2 Press the Paper Source button until the icon

appears on the LCD.

3 Release the paper lever.

Note: If you’re printing on small sheets or ﬁne art

paper, do not release the paper lever.

4 Feed the sheet into the paper slot. Make sure the

right edge of the paper is straight and aligned with

the marks on the roll paper cover.

5 If you released the paper lever, return it to the

locked position.

6 Press the Pause button. The sheet feeds into

the printing position automatically and READY

appears on the control panel.

Caution: To avoid damaging the printer, never

move the paper lever during printing, or while the

Power or Pause light is ﬂashing.

7 Print your page. After it is ﬁnished, the sheet stays

in the printer.

8 To remove your print, press the button.

SP7898_QRGin_CPD20272.indd 2 8/5/05 10:15:29 AM

4 Open the front cover. (The cover has special tabs

that act as paper supports when the cover is open.)

5 Feed the posterboard into the paper slot until it

meets resistance.

Note: If you’re using stock more than 39 inches

long (Epson Stylus Pro 9800 only), load it long edge

ﬁrst (in landscape orientation).

6 Align the board with the mark on the roll paper

cover.

7 Return the paper lever to the locked position. Then

close the front cover.

8 Press the Pause button. The board feeds into

the printing position automatically and READY

appears on the control panel.

9 Run your print job. After it is ﬁnished, the

posterboard stays in the printer.

10 To remove the print, hold it and release the

paper lever.

SP7898_QRGin_CPD20272.indd 3 8/5/05 10:15:29 AM

8 Press the button to start the alignment process.

Each head alignment takes about 7 minutes.

Caution: Make sure you don’t open the front cover or

turn off the printer during the alignment process.

9 When the uni-directional alignment is ﬁnished, press

the button until BI-D 2-COLOR is highlighted.

Then press again to start the bi-directional black

alignment.

10 When the bi-directional black alignment is ﬁnished,

press the button until BI-D ALL is highlighted.

Then press .

11 When the ﬁnal alignment is ﬁnished, press the

Pause button.

Checking, Cleaning, and Aligning the Print Head

Checking and Cleaning the Print

Head

If your printed image shows a color shift or horizontal

lines, you should check the print head to see if any nozzles

are clogged or deﬂected. The printer will then run an

automatic cleaning cycle if necessary.

1 Make sure paper is loaded in the printer.

2 Press the Menu button.

3 Press to highlight TEST PRINT, then press

Menu. NOZZLE CHECK is selected.

4 Press Menu, then press to start printing the

nozzle check pattern.

To clean the print head manually, press the Menu button

and hold it for 3 seconds. The cleaning cycle takes about

one minute and does not use any paper.

Note: You can also run nozzle checks and head cleaning

cycles from your computer using the Epson Printer

Utility (Macintosh) or the Utility tab in your printer driver

(Windows). See your Printer Guide for more information.

Aligning the Print Head

If your prints look grainy or blurry, or you see

misregistration or “ghosting,” you need to align the

print head.

1 Make sure the printer is turned on. Then load

Epson Doubleweight Matte, Enhanced Matte, or

Premium Luster Photo Paper.

2 Press the Menu button.

3 Press the button until HEAD ALIGNMENT

is highlighted. Then press Menu. PAPER

THICKNESS is highlighted.

4 Press the Menu button again. The STANDARD

setting is highlighted. This is the correct thickness

setting for most Epson papers.

5 Press the button to save the setting.

6 Press , then press to highlight ALIGNMENT.

7 Press the Menu button to highlight AUTO, then

press Menu again. UNI-D (uni-directional) is

highlighted. This is the type of alignment to start

with.

HEAD ALIGNMENT

PAPER THICKNESS

ALIGNMENT

ALIGNMENT AUTO

UNI-D

BI-D 2 COLOR

BI-D ALL

SP7898_QRGin_CPD20272.indd 4 8/5/05 10:15:30 AM

Continue

▲

Checking Ink Levels and Replacing Ink Cartridges

Before you begin a large print job, you should check your

ink levels. If one of your cartridges is low, you can replace

it before you start. Or you can wait until the ink runs

out, replace the cartridge, and then continue the job.

Checking Ink and Maintenance Tank

Levels

The easiest way to check ink levels is from the control

panel. The numbers below the ink cartridge icons

correspond to the 8 cartridge slots in the printer. The

larger icon or icons on the right show the status of the

maintenance tank(s). The icons show the percentage of

ink or maintenance tank capacity remaining.

Replacing Ink Cartridges

When the ink light ﬂashes, and INK LOW is displayed

on the LCD, one or more cartridges are nearly empty.

Check the LCD to see which cartridge is low, and make

sure you have the correct replacement cartridge.

You can install any combination of 110 ml and 220 ml

cartridges.

Epson UltraChrome K3TM ink cartridges

When one of the icons shows empty and INK OUT is

displayed on the LCD panel, the cartridge is empty. To

replace the cartridge, ﬁrst make sure the printer is on.

1 Press the ink compartment cover to open it.

2 Raise the ink lever to the unlocked position.

3 Remove the empty ink cartridge from the printer.

Warning: Do not shake the empty cartridge, or ink

may leak. If ink gets on your hands, wash them

thoroughly with soap and water. If ink gets in your

eyes, ﬂush them immediately with water.

4 Make sure the replacement cartridge is the correct

color, and remove it from its package.

Gently shake the cartridge before installing it.

100-81%

80-61%

60-41%

40-21%

20% or less

Ink low

Ink out

Cartridge error or no cartridge

Slot no. Ink color 110 ml 220 ml

1 Light Light Black T562900 T563900

2 Light Magenta T562600 T563600

3 Light Cyan T562500 T563500

4 Light Black T562700 T563700

5 Photo Black T562100 T563100

Matte Black T566800 T567800

6 Cyan T562200 T563200

7 Magenta T562300 T563300

8 Yellow T562400 T563400

SP7898_QRGin_CPD20272.indd 5 8/5/05 10:15:30 AM

Replacing Printer Parts

Replacing Ink Cartridges (continued)

5 Hold the cartridge with the arrow mark pointing

toward the printer. Then insert the cartridge into the

slot. Don’t force it.

Note: If you can’t insert the cartridge smoothly,

you may have the wrong cartridge. Check the

package and product code. If the Ink light remains

on after installing the cartridge, try removing and

then reinserting it.

6 Return the ink lever to its locked position.

7 Close the ink compartment cover.

Replacing the Printer Cutter Blade

If you notice that the paper isn’t cut cleanly, you may need

to replace the cutter blade (part # C12C815291). You can

check its status as described below:

1 Press the Menu button on the printer, then press

until PRINTER STATUS is highlighted.

2 Press Menu, then press until SERVICE LIFE is

highlighted.

3 Press Menu. The cutter service life is displayed.

E*****F indicates a new cutter. If no stars are

displayed, the cutter may need to be replaced.

Caution: Cutting the following media may shorten

the cutter’s life and is not recommended:

• Fine art paper (such as Epson UltraSmooth™,

Textured, or Velvet)

• Canvas

• Backlight ﬁlm

• Vinyl

Follow these steps to replace the cutter:

1 Press the Menu button on the printer, then

press until MAINTENANCE is highlighted.

2 Press the Menu button. CUTTER

REPLACEMENT is highlighted.

3 Press Menu to display EXECUTE, then press .

The print head moves to the cutter replacement

position.

4 Open the front cover.

Continue

▲

SP7898_QRGin_CPD20272.indd 6 8/5/05 10:15:31 AM

Replacing Printer Parts (continued)

5 Hold down the side pin, as shown, then turn the

latch to the right.

6 Release the side pin and carefully remove the cutter

blade.

Replacing the Maintenance Tank

The Epson Stylus Pro 7800 has one maintenance tank

(on the right side) and the 9800 has two (one on either

side). You need to replace the maintenance tank

(part # C12C890191) when you see MAINTENANCE

TANK FULL on the LCD. The ink light also turns red.

1 If you have the Epson Stylus Pro 9800, check the

LCD to determine which tank needs to be replaced

(left or right).

Note: The printer will not print if one of the

maintenance tanks is full. On the Epson Stylus

Pro 9800, the right tank is used more than the left.

To maximize tank life, you can switch the tanks.

7 Insert the new cutter blade.

8 Hold down its side pin and secure it with

the latch.

9 Close the front cover. The carriage returns to the

home position.

2 Make sure the printer is on, and pull out the

maintenance tank as shown.

Caution: Do not tip the tank, or ink may spill out.

3 Place the used tank in the plastic bag included with

the new tank.

4 Insert the new tank.

SP7898_QRGin_CPD20272.indd 7 8/5/05 10:15:33 AM

Control Panel Menus

Boldface type indicates the default setting. Press the Menu button to access the menus.

Continue

▲

Menu Item Settings / Explanation

PRINTER SETUP ROLL PAPER COUNTER Available only if REMAINING PPR SETUP

ROLL PAPER LENGTH is enabled in Maintenance Mode

ROLL LENGTH ALERT

PLATEN GAP STANDARD, NARROW, WIDE, WIDER, WIDEST

PAGE LINE ON, OFF

INTERFACE AUTO, USB, IEEE 1394, OPTIONAL I/F CARD

CODE PAGE PC437, PC850

ROLL PAPER MARGIN DEFAULT, TOP/BOTTOM15mm, TOP 35/BOTTOM15mm,

15mm, 3mm

PAPER SIZE CHECK ON, OFF

PAPER SKEW CHECK ON, OFF

TIME OUT OFF, 30sec, 60sec, 180sec, 300sec

CUTTER ADJUSTMENT EXECUTE

REFRESH MARGIN ON, OFF

AUTO NOZZLE CHECK ON, OFF

AUTO CLEANING ON, OFF

QUIET CUT ON, OFF

INITIALIZE SETTINGS Restores default settings

TEST PRINT NOZZLE CHECK Shows clogged or deﬂected nozzles

STATUS CHECK Ink and paper remaining and status of parts

JOB INFORMATION Ink and paper used for the last 10 jobs;

most recent job is number 0

CUSTOM PAPER Information about registered paper conﬁgurations

PRINTER STATUS VERSION Current ﬁrmware version

PRINTABLE PAGES For the amount of ink remaining in each cartridge

INK LEVEL E*****F for each ink color

MAINTENANCE TANK E*****F

USAGE COUNT Ink in milliliters, paper in square centimeters

CLEAR USAGE COUNT EXECUTE

JOB HISTORY Ink in milliliters and paper in square centimeters for each

saved job

TOTAL PRINTS Number of pages printed

SERVICE LIFE E*****F for CUTTER,

CR MOTOR (carriage)

PF MOTOR (paper feed)

HEAD UNIT (print head)

CLEANING UNIT

PRESSURE MOTOR

SP7898_QRGin_CPD20272.indd 8 8/5/05 10:15:34 AM

Where To Get Help

Control Panel Menus (continued)

Epson and Epson Stylus are registered trademarks and Exceed Your Vision is a trademark of Seiko Epson Corporation. Epson UltraChrome K3 and

UltraSmooth are trademarks and Epson Preferred is a service mark of Epson America, Inc.

Service

Telephone support

World Wide Web

Support for non-Epson RIP

Access

Call (888) 377-6611. Make sure

you have your Unit ID number.

If you experience any difﬁculty with the toll-free number or your Unit ID

number, call (562) 276-1305.

Go to http: //support.epson.com to download drivers, access product

documentation and troubleshooting, and get technical advice

through e-mail.

Contact the RIP manufacturer.

Epson PreferredSM Unit ID number

Date of purchase

Serial number

PRINTER STATUS VERSION Current ﬁrmware version

PRINTABLE PAGES For the amount of ink remaining in each cartridge

INK LEVEL E*****F for each ink color

MAINTENANCE TANK E*****F

USAGE COUNT Ink in milliliters, paper in square centimeters

CLEAR USAGE COUNT EXECUTE

JOB HISTORY Ink in milliliters and paper in square centimeters for each

saved job

TOTAL PRINTS Number of pages printed

SERVICE LIFE E*****F for CUTTER,

CR MOTOR (carriage)

PF MOTOR (paper feed)

HEAD UNIT (print head)

CLEANING UNIT

PRESSURE MOTOR

CUSTOM PAPER PAPER NUMBER STANDARD, NO. (1 to 10)

PLATEN GAP STANDARD, NARROW, WIDE, WIDER

THICKNESS PATTERN PRINT

THICKNESS NUMBER 1 to 15

CUT METHOD STANDARD, THIN PAPER, THICK PAPER FAST,

THICK PAPER SLOW

PAPER FEED ADJUST -0.70% to 0.70%

DRYING TIME 0. 0 sec. to 10.0 sec.

PAPER SUCTION STANDARD, -1, -2, -3, -4

M/W ADJUSTMENT STANDARD, 1, 2

MAINTENANCE CUTTER REPLACEMENT EXECUTE

BK INK CHANGE EXECUTE

POWER CLEANING EXECUTE

CLOCK SETTING MM/DD/YY HH:MM

CONTRAST ADJUSTMENT -20 to +20

HEAD ALIGNMENT PAPER THICKNESS STANDARD, 0.1 mm to 1.5 mm

ALIGNMENT

AUTO UNI-D, BI-D 2-COLOR, BI-D ALL, BI-D #1, BI-D #2, BI-D #3

MANUAL UNI-D, BI-D 2-COLOR, BI-D ALL

SP7898_QRGin_CPD20272.indd 9 8/5/05 10:15:35 AM

Andere Handbücher für 7800 - Stylus Pro Color Inkjet Printer

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Epson Drucker Handbücher

Epson

Epson SC-F2200 Series Bedienungsanleitung

Epson

Epson WorkForce Pro WP-4515 Bedienungsanleitung

Epson

Epson LQ-300 - Impact Printer Bedienungsanleitung

Epson

Epson STYLUS S20 Series Bedienungsanleitung

Epson

Epson 875DC - Stylus Photo Color Inkjet Printer Installationsanleitung

Epson

Epson SC-P600 series Bedienungsanleitung

Epson

Epson R1800 - Stylus Photo Color Inkjet Printer Bedienungsanleitung

Epson

Epson Aculaser C1600 Bedienungsanleitung

Epson

Epson Stylus Pro 4800 Portrait Edition Bedienungsanleitung

Epson

Epson FX-2180 - Impact Printer Bedienungsanleitung

Epson

Epson Stylus C40UX Bedienungsanleitung

Epson

Epson TM-T88V-DT Bedienungsanleitung

Epson

Epson MX-80 IIIF/T Bedienungsanleitung

Epson

Epson Stylus Color 760 Bedienungsanleitung

Epson

Epson WorkForce WF-2510WF Bedienungsanleitung

Epson

Epson 4000 - Stylus Pro Color Inkjet Printer Bedienungsanleitung

Epson

Epson Stylus Pro Original Montageanleitung

Epson

Epson SureLab D3000 - Double Roll Service-Handbuch

Epson

Epson Stylus PHOTO 1290 Bedienungsanleitung

Epson

Epson Stylus Color II Bedienungsanleitung

Epson

Epson Stylus Pro 9700 Series Bedienungsanleitung

Epson

Epson ME 32 Bedienungsanleitung

Epson

Epson PT-6000 Bedienungsanleitung

Epson

Epson TM-T88V-DT-542 Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Lexmark

Lexmark 1400 Series Handbuch

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Canon

Canon CLBR 460ps Bedienungsanleitung

Eltron

Eltron P210 Guide Bedienungsanleitung

Ricoh

Ricoh MD-P1 Bedienungsanleitung

Canon

Canon imagePASS-A2 Bedienungsanleitung

Canon

Canon S820D Bedienungsanleitung

IRA3D

IRA3D POETRY4 Bedienungsanleitung

Ricoh

Ricoh Aficio AP400 Bedienungsanleitung

BIXOLON

BIXOLON SRP-352plusV Bedienungsanleitung