Epson AcuLaser C8600 Bedienungsanleitung

Control Panel Operation (1/3)

EPSON AcuLaser C8600 Quick Reference

Control Panel Operation

The control panel is made up of three

elements: a liquid crystal display (LCD)

panel, indicator lights, and buttons. The

LCD panel and indicator lights tell you the

current status of the printer, and you can use

the control panel buttons to make printer

settings, check consumable products, and

print status sheets. However, settings made

in your application and in the printer driver

usually override settings made at the control

panel.

1LCD panel Displays printer status

messages and control panel

menu settings.

Enter

Down

Back buttons

Use these buttons to access

the control panel menus,

where you can make printer

settings and check the status

of consumable products. For

instructions on how to use

each button, see “Using the

Control Panel Menus” in the

Reference Guide.

12345

10 987

4Job Cancel

button

Press once to cancel the

current print job.

Press down for more than

two seconds to delete all jobs

from the printer memory,

including jobs the printer is

currently receiving, saving to

the Hard Disk Drive, or

printing.

5Start/Stop

button

Switches the printer between

ready and offline status.

When the error light is

flashing, pressing this button

clears the error and switches

the printer to ready status.

6Errorlight

(Red)

On or flashes when an error

has occurred.

7Ready light

(Green)

On when the printer is ready,

indicating that the printer is

ready to receive and print

data.

When the printer is not

ready, this light is off.

8Data light

(Yellow)

On when print data is stored

in the print buffer (the section

of printer memory reserved

for receiving data) but not yet

printed.

Flashing when the printer is

processing data.

Off when no data remains in

the print buffer.

Control Panel Operation (2/3)

EPSON AcuLaser C8600 Quick Reference

How to access the control panel

menus

This section explains how to access, use, and

exit the control panel menus. Refer to the

illustrations below for an overview of the

control panel button functions, and see the

steps later in this section for detailed

instructions.

For a complete description of the items and

settings available in the control panel

menus, see “Control Panel Menus” in the

Reference Guide.

Accessing the control panel menus

When the printer’s Ready light is on,

pressing any of the control panel buttons

shown below accesses the control panel

menus.

Using the control panel buttons

Once you’ve accessed the menus, the

control panel buttons function as shown

below.

Press any button to

access menus.

1. Up/Down buttons Scrolls through menus,

items, and settings on

the current level.

2. Enter button Advances to the next

level, carry out

indicated operations,

and activate settings.

3. Back button Returns to the previous

level.

4. Start/Stop button Exits the control panel

menus from any level.

Control Panel Operation (3/3)

EPSON AcuLaser C8600 Quick Reference

How to use the menus

1. Make sure the Ready light is on, then

press any of the buttons indicated above

to access the menus.

2. Use the

u Up and

d Down buttons to

scroll through the menus.

3. Press the Enter button to view the

items in a menu. Depending on the

menu, the LCD panel displays an item

and the current setting separated by an

asterisk (YYYY*ZZZZ), or only an item

(YYYY).

4. Use the

u Up and

d Down buttons to

scroll through the items, or press the

Back button to return to the previous

level.

5. Press the Enter button to carry out

the operation indicated by an item, such

as printing a status sheet or resetting the

printer, or to view the settings available

for an item, such as paper sizes or

emulation modes.

Use the

u Up and

d Down buttons to

scroll through available settings, and

press the Enter button to select a

setting and return to the previous level.

Press the Back button to return to the

previous level without changing the

setting.

Note:

You need to turn the printer off and then on

to activate some settings. For details, see

“Control Panel Menus” in the Reference

Guide.

6. Press the Start/Stop button to exit the

control panel menus.

Status and Error Messages (1/8)

EPSON AcuLaser C8600 Quick Reference

Status and Error Messages

This section contains a list of error messages

shown on the LCD panel, giving a brief

description of each message and suggestions

for correcting the problem. Note that not

every message shown on the LCD panel

indicates a problem.

Calibrating Printer

The printer automatically calibrates itself

when any of its covers is opened and when

there is no paper jammed inside. This is not

an error message, and will clear itself after

one minute. While the printer displays this

message, do not open the covers or turn off

the printer.

Cancel All Print Job

The printer is canceling all print jobs in the

printer memory, including jobs the printer is

currently receiving or printing. This

message appears when the Job Cancel

button has been pressed down for more than

2 seconds.

Cancel Print Job

The print is canceling the current print job.

This message appears when the Job

Cancel button has been pressed and released

within 2 seconds.

Cannot Print Duplex

The printer has encountered problems

during duplex printing. Make sure you are

using an appropriate type and size of paper

for the Duplex Unit. The problem could also

be a result of incorrect settings for the paper

source you are using. Pressing theStart/Stop

button will print the rest of the print job on

only one side of the paper. Press the Job

Cancel button to cancel the print job.

Check Paper Size

The paper size setting is different from the

size of paper loaded in the printer. Check to

see if the correct size of paper is loaded in the

specified paper source.

To clear this error, select Clear Warning

from the control panel’s Reset Menu. See

“How to access the control panel menus” for

instructions.

Check Paper Type

The media loaded in the printer does not

match the paper type setting in the printer

driver. Media that matches only the paper

size setting will be used for printing.

To clear this error, select Clear Warning

from the control panel’s Reset Menu. See

“How to access the control panel menus” for

instructions.

Check Transparency

You have loaded media other than

transparencies when the Paper Type setting

in the printer driver is Transparency. The

printer stops loading to prevent printer

damage. Load transparencies in the

specified paper source, then press the

Start/Stop button.

Collate was disabled

Printing by specifying the number of copies

is no longer possible due to a lack of memory

(RAM) or free disk space on the optional

Hard Disk Drive. If this error occurs, print

only one copy at a time.

To clear this error, select Clear Warning

from the control panel’s Reset Menu. See

“How to access the control panel menus” for

instructions.

Status and Error Messages (2/8)

EPSON AcuLaser C8600 Quick Reference

Cover A Open

Cover A, the output path cover on the left

side of the printer, is open. Close the cover

and the error is automatically cleared.

Cover D Open

Cover D, the paper cassette cover on the

right side of the printer, is open. Close the

cover and the error is automatically cleared.

Cover E Open

Cover E, the cover on the right side of the

optional Large Capacity Paper Unit, is open.

Close the cover and the error is

automatically cleared.

Cover F Open

Cover F, the optional Duplex Unit’s inverter

cover on the left side of the printer, is open.

Close the cover and the error is

automatically cleared.

Duplex Mem Overflow

There is not enough memory for duplex

printing. The printer prints only on the front

and ejects the paper. To clear this error,

follow the instructions below.

If Off is selected as the Auto Cont setting on

the control panel’s Setup Menu, press the

Start/Stop button to print on the back of the

next sheet, or press the Job Cancel button

to cancel the print job.

If On is selected as the Auto Cont setting on

the control panel’s Setup Menu, printing

continues automatically after a certain

period of time.

Format Error ROM A/Format Error Rom B

An unformatted ROM module has been

inserted. If the ROM module has been

formatted, but is still unreadable, format it

again. If the ROM is still unreadable after

reformatting, take the module to your dealer

for repair or replacement.

To clear this error, either press the Start/Stop

button or turn off the printer and remove the

ROM module.

Form Data Canceled

Unable to store form overlay data on the

printer’s Hard Disk Drive. Either the drive is

full, or the maximum number of form

overlay files has been reached. Delete any

form overlay files you no longer need, then

try storing the new overlay again.

To clear this error, select Clear Warning

from the control panel’s Reset Menu. See

“How to access the control panel menus” for

instructions.

Form Feed

The printer is ejecting paper due to a printing

error. This message appears when the

Start/Stop button has been held down for

more than 2 seconds in order to recover from

a printing error.

Front Cover Open

The front cover is open. Close the cover and

the error is automatically cleared.

Hard Disk Full

The printer has insufficient memory. Delete

the unnecessary data from the Hard Disk

Drive. To clear this error, select Clear

Warning from the control panel’s Reset

Menu. See “How to access the control panel

menus” for instructions.

Status and Error Messages (3/8)

EPSON AcuLaser C8600 Quick Reference

HDD Check

The printer is checking the Hard Disk Drive.

HDD Format ***%

The printer is formatting the optional Hard

Disk Drive. *** indicates the formatting

progress.

Image Optimum

There is insufficient memory to print the

page at the specified print quality. The

printer automatically lowers the print

quality so that it can continue printing. If the

quality of the printout is not acceptable, try

simplifying the page by limiting the number

of graphics or reducing the number and size

of fonts.

To clear this error, select Clear Warning

from the control panel’s Reset Menu. See

“How to access the control panel menus” for

instructions.

Turn the Image Optimum setting off on the

control panel’s Printing Menu if you do not

want the printer to automatically lower the

print quality to continue printing.

You may need to increase the amount of

printer memory to be able to print at the

desired print quality for your document. For

more information on adding memory, see

“Memory module” in the Reference Guide.

Install Photoconductor

There is no photoconductor unit installed or

the photoconductor unit is not installed

properly. Turn off the printer and install the

photoconductor unit if it is not installed.

If a photoconductor unit is already installed,

turn off the printer, open cover A, then open

cover D. Remove the photoconductor unit,

then reinstall it properly. Close covers D and

A. The error clears automatically if the

photoconductor unit is properly installed.

Install Waste T Box

The waste toner collector is not installed, or

is installed incorrectly. If there is no waste

toner collector installed, install one in the

printer. If there is a waste toner collector

already installed, try removing it and

reinstalling it. See “Replacing the waste

toner collector” in the Reference Guide for

instructions.

Invalid AUX I/F Card

This message means that the printer cannot

communicate with the installed optional

interface card. Turn off the printer, remove

the card, then reinstall it.

Invalid HDD

Either the optional Hard Disk Drive is

damaged or it cannot be used with this

printer. Turn off the printer and remove the

Hard Disk Drive.

Invalid IPDS

Turn off the printer and replace the IPDS

module.

Invalid PS3

An optional PostScript 3 ROM module that

cannot be used on this printer is installed.

Turn off the printer and remove the module.

Invalid ROM A/Invalid ROM B

The printer cannot read the installed

optional ROM module. Turn off the printer

and remove the ROM module.

To clear this error, select Clear Warning

from the control panel’s Reset Menu. See

“How to access the control panel menus” for

instructions.

Status and Error Messages (4/8)

EPSON AcuLaser C8600 Quick Reference

Irregular Density

If you try to print on media of overly high

density, the printer stops loading the media

to prevent printer damage. In this case, you

need to clear any jammed media from the

MP tray or the paper path unit.

Jam XX

The location where the paper jam occurred

is displayed at xxxx. xxxx indicates the

location of the error.

If a paper jam occurs at two or more locations

simultaneously, the corresponding multiple

locations are displayed.

Manual Feed xxx

The manual feed mode is specified for the

current print job. Make sure the paper size

indicated by xxx is loaded, then press the

Start/Stop button.

If you do not want to print this job in manual

mode, press the Start/Stop button. The

printer feeds paper from the specified paper

source.

For details on the manual feed mode, see

“Manually feeding paper”.

Mem Overflow

The printer has insufficient memory to

execute the current task. Press the Start/Stop

button on the control panel to resume

printing. Or press the Job Cancel button

to cancel the print job.

Menus Locked

This message appears if you try to change

the printer’s settings through the control

panel when the buttons are locked. You can

unlock them by using the EPSON WinAssist

or WebAssist utility. Refer to the

Administrator’s Guide for information.

Jam A Paper is jammed inside the output path

cover (cover A). For instructions on how to

remove jammed paper at the output path

cover, see “Paper Jam - Cover A (Jam A)”.

Jam B Paper is jammed inside the fuser unit (unit

B). For instructions on how to remove

jammed paper at the fuser unit, see

“Paper Jam - Cover B (Jam B)”.

Jam C Paper is jammed inside the paper path

unit (unit C). For instructions on how to

remove jammed paper at the paper path

unit, see “Paper Jam - Unit C (Jam C)”.

Jam D Paper is jammed inside the paper cassette

cover (cover D). For instructions on how to

remove jammed paper at the paper

cassette cover, see “Paper Jam - Cover D

(Jam D)”.

Jam E Paper is jammed inside the cover on the

right side of the optional Large Capacity

Paper Unit (cover E). For instructions on

how to remove jammed paper at the right

side of the Large Capacity Paper Unit, see

“Paper Jam - Cover E (Jam E)”.

Jam F Paper is jammed inside the optional

Duplex Unit’s inverter cover (cover F). For

instructions on how to remove jammed

paper at the Duplex Unit’s inverter cover,

see “Paper Jam - Cover F (Jam F)”.

Jam G Paper is jammed inside the optional

Duplex Unit’s main unit (unit G). For

instructions on how to remove jammed

paper at the Duplex Unit’s main unit, see

“Paper Jam - Unit G (Jam G)”.

Status and Error Messages (5/8)

EPSON AcuLaser C8600 Quick Reference

Need Memory

The printer has insufficient memory to

complete the current print job. Cancel

printing by deleting it from the print queue

on your computer, or by pressing the Job

Cancel button on the printer.

To clear this error message, select Clear

Warning from the control panel’s Reset

Menu. See “How to access the control panel

menus” for instructions.

To prevent this problem from happening

again, add more memory to your printer as

described in “Memory module” in the

Reference Guide.

Offline

The printer is not ready to print. Press the

Start/Stop button.

Optional RAM Error

The optional memory module may be

corrupted or incorrect. Replace it with a new

one.

Outbin Select Error

Printouts are not output to the specified

output tray, but to another tray due to a

printing restriction.

Paper Out XXX YYY

There is no paper in the specified paper

source (XXX). Load paper of the indicated

size (YYY) into the paper source.

Paper Set XXX YYY

The paper loaded in the specified paper

source (XXX) does not match the required

paper size (YYY). Replace the loaded paper

with the correct size paper and press the

Start/Stop button to resume printing. Or

press the Job Cancel button to cancel the

print job.

If you press the Start/Stop button without

replacing the paper, the printer will print on

the loaded paper even though it does not

match the required size.

Photocondutr Trouble

The installed photoconductor unit has a

problem. Turn off the printer, remove the

photoconductor unit and install a new

photoconductor unit. See “Replacing the

photoconductor unit” in the Reference Guide.

Print Overrun

The required time to process the print data

exceeded the print engine speed because the

current page is too complex. Press the

Start/Stop button to resume printing. Or

press the Job Cancel button to cancel the

print job. If this message appears again,

select On as the Page Protect setting in the

control panel’s Setup Menu.

If you continue to receive this message when

printing a particular page, try simplifying

the page by limiting the number of graphics

or reducing the number and size of fonts.

You can also add more memory to the

printer as described in “Memory module” in

the Reference Guide.

PS3 Hard Disk full

The memory allocated for writing PostScript

3 commands on the optional Hard Disk

Drive is full.

To clear this error, select Clear Warning

from the control panel’s Reset Menu. See

“How to access the control panel menus” for

instructions.

RAM Check

The printer is checking the RAM.

Status and Error Messages (6/8)

EPSON AcuLaser C8600 Quick Reference

Ready

The printer is ready to receive data and print.

Replace Photoconductr

The photoconductor unit has reached the

end of its service life. Turn off the printer,

then replace the photoconductor unit with a

a new one. See “Photoconductor Unit” in the

Reference Guide for instructions.

The error clears automatically after you

replace the unit and close all printer covers.

The photoconductor service life counter is

reset automatically.

Replace Waste T Box

The waste toner collector is full of toner.

Replace it with a new waste toner collector.

See “Replacing the waste toner collector” in

the Reference Guide.

The error clears itselfafter you have replaced

the waste toner collector and close the front

cover.

Reserve Job Canceled

The printer cannot store the data of your

print job using the Reserve Job function. The

maximum number of print jobs stored in the

printer’s Hard Disk Drive has been reached,

or the drive has no more memory available

to store a new job. To store a new print job,

delete a previously stored job. Also, if you

have any Confidential Jobs stored, printing

those jobs will make more memory

available.

To clear this error, select Clear Warning

from the control panel’s Reset Menu. See

“How to access the control panel menus” for

instructions.

Reset

The printer’s current interface has been reset

and the buffer has been cleared. However,

other interfaces are still active and retain

their settings and data.

Reset All

All printer settings have been reset to the

default configuration, or to the last settings

that were saved.

Reset to Save

A control panel menu setting was changed

while the printer was printing. Press the

Start/Stop button to clear this message. The

setting will become effective after printing

has finished.

ROM Check

The printer is checking the ROM.

Self Test

The printer is performing a quick internal

check.

Service Req xyyy

A controller error or a print engine error has

been detected. Turn off the printer. Wait at

least 5 seconds and then turn it back on. If

the error message still appears, write down

the error number listed on the LCD panel

(xyyy) and turn off the printer, unplug the

power cord, and contact a qualified service

representative.

Standby

The printer is in stand-by mode.

Status and Error Messages (7/8)

EPSON AcuLaser C8600 Quick Reference

Time exceeded

Paper was forcibly output (blank sheet

printing) as the print data did not arrive in

time even though paper was pre-fed.

Toner Cart Out

One or more toner cartridges are not

installed in the printer.

Install the cartridges. See “Toner Cartridge”

in the Reference Guide.

Turn Paper XXX

Paper is loaded in the wrong orientation in

the XXX cassette. Remove the paper stack

from the standard lower cassette, turn it by

90 degrees, and reload it with the long edge

first.

Unable Clear Error

The printer cannot clear an error message

because the error status still remains. Try

solving the problem again.

Unit B Open

The fuser unit is open. The error

automatically clears itself when the fuser

unit is closed properly.

Unit C Open

The paper path unit is open. The error

automatically clears itself when the paper

path unit is closed properly.

Unit G Open

The optional Duplex Unit’s main unit is

open. The error automatically clears itself

when the Duplex Unit’s main unit is closed

properly.

Warming Up

The printer is warming up.

Waste T Box Nearfull

The waste toner collector is nearly full of

toner. You can continue to print until the

Replace Waste T Box error message

appears, but early replacement is

recommended to maintain high print

quality. See “Replacing the waste toner

collector” in the Reference Guide.

Worn Fuser

This message indicates that the fuser unit is

near the end of its service life. Turn the

printer off, then replace the fuser unit with a

new one. Contact your dealer.

To clear this warning message and continue

printing, select Clear Warning from the

control panel’s Reset Menu. See “How to

access the control panel menus” for

instructions.

Worn Photoconductor

This message indicates that the

photoconductor unit is near the end of its

service life. You can continue to print until

the Replace Photocondctr error message

appears, but early replacement is

recommended to maintain high print

quality.

To clear this warning message and continue

printing, select Clear Warning from the

control panel’s Reset Menu. See “How to

access the control panel menus” for

instructions.

Write Error ROM A/Write Error ROM P

This message indicates an internal error in

the printer. Reset the printer. If this error

persists, consult your dealer.

Andere Handbücher für AcuLaser C8600

Inhaltsverzeichnis

Andere Epson Drucker Handbücher

Epson

Epson L121 Bedienungsanleitung

Epson

Epson WorkForce WF-7830 Series Bedienungsanleitung

Epson

Epson EPL N2700 Bedienungsanleitung

Epson

Epson XP-6100 Bedienungsanleitung

Epson

Epson Artison 800 Bedienungsanleitung

Epson

Epson Stylus COLOR 1160 Bedienungsanleitung

Epson

Epson 297 Handbuch

Epson

Epson Stylus Photo 700 Bedienungsanleitung

Epson

Epson TM-T88V-i Bedienungsanleitung

Epson

Epson SureColor F-Series Montage- und Wartungsanleitung

Epson

Epson ET-3760 Bedienungsanleitung

Epson

Epson U325 - TM B/W Dot-matrix Printer Bedienungsanleitung

Epson

Epson L365 Bedienungsanleitung

Epson

Epson Stylus Color 200 Bedienungsanleitung

Epson

Epson WorkForce WF-7010 Bedienungsanleitung

Epson

Epson Stylus Photo 700 Bedienungsanleitung

Epson

Epson 50 - Artisan 50 - Printer Bedienungsanleitung

Epson

Epson Stylus Color 880i Bedienungsanleitung

Epson

Epson EcoTank Pro M15180 Series Bedienungsanleitung

Epson

Epson Stylus SX230 Bedienungsanleitung

Epson

Epson Stylus 1500 Bedienungsanleitung

Epson

Epson XP-860 Bedienungsanleitung

Epson

Epson PictureMate Snap PM 240 Installationsanleitung

Epson

Epson ColorPage EPL-C8000 Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Brother

Brother 1440 - HL B/W Laser Printer Kurzanleitung

Fuji Xerox

Fuji Xerox DocuPrint P375 dw Bedienungsanleitung

WOOSIM

WOOSIM PORTI-S30 Bedienungsanleitung

Olivetti

Olivetti PG L2140 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 224e Bedienungsanleitung

Canon

Canon LBP113w Bedienungsanleitung

Xerox

Xerox DocuColor 5000 Bedienungsanleitung

Canon

Canon PRO-500 Series Einrichtungshandbuch

Lexmark

Lexmark Infoprint 1332 Bedienungsanleitung