Epson PictureMate Bedienungsanleitung

PictureMate

4/04 PictureMate - 1

PictureMate Parts Accessories

PictureMate Print Pack (part# T5570)

Includes 100 sheets of PicureMate Photo Paper and a

PictureMate Photo Cartridge

PictureMate Carrying Case (part# ARC1B)

Soft case that holds PictureMate, power cable, extra

PictureMate Print Pack, and more

Epson Bluetooth Photo Print Adapter

(part# C12C824142)

Allows printing wirelessly from Bluetooth-enabled cell

phones, PDAs, or computers to PictureMate

Printer Specifications

Printing

Nozzle

configuration 90 nozzles × 6: yellow, magenta, cyan,

photo black, red, blue

Print direction Bidirectional with logic seeking

Control code ESC/P Raster, EPSON Remote command

Input buffer 64KB

Mechanical

Paper capacity 20 sheets of PictureMate Photo Paper

Dimensions

Storage Width: 10.0 inches (256 mm)

Depth: 6.1 inches (154 mm)

Height: 6.4 inches (163 mm)

Printing Width: 10.0 inches (256 mm)

Depth: 12.0 inches (305 mm)

Height: 6.4 inches (163 mm)

Weight 5.5 lb (2.5 kg) without photo cartridge

Electrical

Input voltage 108 to 132 V

Rated frequency 50 to 60 Hz

Input frequency 49.5 to 60.5 Hz

Rated current 0.4 A

Memory card light

(flashes when reading

card; on when card is

in printer)

Control Panel

Front

Go back or

stop

printing

Click to print

Navigate

options

LCD menu screen Save photos to an external

storage drive (CD-R, Zip disk,

or flash memory drive)

Turn PictureMate on or off

Back

Paper support

Output tray

Memory card door

EXT/IF (USB) port for PictBridge

camera, external drive, or

optional Bluetooth Adapter

USB port for computer

Handle

Power cable

Photo cartridge door

PictureMate

2 - PictureMate 4/04

Power

consumption Approx. 13 W

Approx. 4 W in standby mode

Environmental

Temperature

Operation 50 to 95 °F (10 to 35 °C)

Storage* −4 to 104 °F (−20 to 40 °C)

1 month at 104 °F (40 °C)

Transit* –4 to 140 °F (–20 to 60 °C)

120 hours at 140 °F (60 °C)

Humidity (without condensation)

Operation 20 to 80% RH

Storage* 5 to 85% RH

* Stored in shipping container

Safety Approvals

Safety standards UL 1950, CSA C22.2 No. 950

EMI FCC part 15 subpart B class B

CSA C108.8 Class B

Photo Cartridge

* Ink thaws and is usable after approximately 3 hours at

77 °F (25 °C).

Caution: To ensure good results, use a genuine PictureMate Photo

Cartridge and do not refill it. PictureMate calculates the amount of ink

remaining using an IC chip on the photo cartridge, so even if the

cartridge is refilled, the IC chip will report that it is empty.

Do not use a photo cartridge if the date on the cartridge has expired.

Do not leave PictureMate, a PictureMate Photo Cartridge, or

PictureMate with a PictureMate Photo Cartridge installed exposed to

heat or direct sunlight.

Loading Paper

Follow these steps to load PictureMate Photo Paper.

Caution: Don’t load plain paper; this may damage PictureMate.

1. Move the handle to the back and down.

Note: Keep the handle to the back and all the way down, to

allow paper to feed through.

2. Open the output tray.

3. Open the paper support. Slide the top part of the paper

support up gently until it clicks into place.

4. Place your paper against the right edge, glossy side up.

Note: Make sure paper is glossy side up to prevent smearing.

5. Slide the edge guide against the paper. Make sure it is snug,

but not so tight that paper is bent.

Printing

PictureMate can print photos from these devices:

❏Your digital camera’s memory card.

❏A data storage device, such as a CD, Zip disk, or flash

memory (thumb) drive. See the Using PictureMate Without

a Computer book for details.

❏A PictBridge- or USBDP-enabled digital camera. See the

Using PictureMate Without a Computer book for details.

Colors Black, Cyan, Magenta, Yellow, Red, and Blue

Cartridge life 2 years from production date (if unopened)

(within 6 months after opening package, at

77 °F [25 °C])

Storage temperature −4 to 104 °F (−20 to 40 °C)

1 month at 104 °F (40 °C)

Transit temperature −22 to 140 °F (−30 to 60 °C)

1 month at 104 °F (40 °C)

120 hours at 140 °F (60 °C)

Freezing temperature* 12.2 °F (−11 °C)

Dimensions 7.7 ×3.6 ×0.7 inches (W ×D×H)

196 ×91.5 ×18.8 mm (W ×D×H)

Open output tray

Move handle

to the back

and down

Load

glossy side

up Open and

slide up

paper support

Edge

guide

PictureMate

4/04 PictureMate - 3

❏A Bluetooth®-enabled device (requires an optional

Bluetooth Photo Print adapter). See the Using PictureMate

Without a Computer book for details.

❏Your computer. See the Using PictureMate With a Computer

booklet and the on-screen User’s Guide (included on your

PictureMate CD) for details.

However your photos are stored, make sure the image files

meet these requirements:

❏JPEG files or uncompressed Tiff files only

❏The file storage device should comply with DCF (Design

rule for Camera File systems) Version 1.0

❏Resolutions ranging from 160 × 160 to 4600 × 4600 pixels

Your PictureMate recognizes and prints the first 999 photos

on your memory card or device.

Inserting a Memory Card

Note: Insert just one card at a time. The card does not go in all the

way. See above for supported photo file formats.

1. Press On to turn on PictureMate.

2. Open the memory card door.

3. Insert the memory card into one of the three slots.

4. Push the card in carefully until it stops (it won’t go in all the

way). When it is in, the card light comes on.

5. Close the memory card door.

Now you can print a proof sheet of all the photos on your card

using the PictureMate Print Wizard (see page 4). You can also

choose photos and layouts for printing from the Main Menu

(see page 5).

Removing a Memory Card

Make sure the card light is not flashing, then pull the card

straight out of the slot.

Caution: Do not remove a card while the card light is flashing; you

may lose photos on your card.

CompactFlash®or MicrodriveTM

(bottom)

Memory Stick®

(middle)

SD (Secure Digital) or

MMC (MultiMediaCard)

(middle)

xD Picture CardTM

(top)

SmartMediaTM

(top)

Card

light

PictureMate

4 - PictureMate 4/04

Printing a Proof Sheet With the Wizard

When you insert the memory card, you see the PictureMate

Print Wizard with this message:

Note: If you don’t see the PictureMate Print Wizard, remove and re-

insert your card. If you have selected photos with DPOF (see page 6),

you will not see the PictureMate Print Wizard.

1. Press Print to print your proof sheet.

Press Cancel instead if:

❏you have already printed a proof sheet for the photos

currently on your card

❏you want to print all your photos and don’t need to see

a proof sheet

❏you are printing with PictBridge or USBDP and you

have already used your camera to choose photos to print

Note: You should print a proof sheet if you’ve deleted photos or

taken new photos since the last time you printed one, as the

photo numbering may have changed.

Your proof sheet includes up to 20 photos per sheet, so it might

print on several sheets of paper, depending on the number of

photos on your card.

2. Look at your proof sheet and choose the photo numbers for

the photos you want to print, then continue with the next

section to see how to print them.

Choosing and Printing Photos With the

Wizard

After you print a proof sheet or cancel it, you see this screen:

You can choose the Print All option to print all of the photos

on your card, or Print Some to print one or several photos by

selecting the photo numbers that appear on your proof sheet.

All Photos

Press Print to start printing all your photos as borderless,

4 ×6-inch prints.

Note: If your card has more than 20 photos, you will need to reload

paper while printing. Load a maximum of 20 sheets at a time. When

you see the message “Try loading paper again,” load more paper and

press OK to continue printing. If you need to cancel printing, press

Cancel.

When printing is complete, you see the Main Menu. To print

from the Main Menu, see page 5.

Tip: To start the PictureMate Print Wizard again, remove and

re-insert your card (see page 3).

Some Photos

1. Press OK.

2. Press or to highlight the number of the photo you

want to print (find the photo number on the proof sheet),

then press OK to choose it.

Tip: Hold down or to scroll quickly.

Note: If you press OK too many times, you will deselect the

photo.

3. Press or to choose the number of copies to print for

that photo (up to 10), then press OK.

Tip: To print more than 10 copies of a photo, use the One Photo

option from the Main Menu to print up to 100 copies at once.

(See page 5.)

Photo number

PictureMate

4/04 PictureMate - 5

4. Repeat steps 2 and 3 for each additional photo you want to

print.

The screen shows the selected photos and the number of

copies for each. (You may need to press or to see all

your selected photos.)

Note: If you chose the wrong photo, you can deselect it.

Highlight the selected photo and press OK to uncheck it. To

change the number of copies, press OK twice and change the

number as described in step 3.

5. When you’re done selecting photos, press Print.

6. Confirm your photo choices (press or to scroll

through your selected photos), then press Print again to

start printing.

Note: If the Print Confirmation is off, you will not see the screen

above and only need to press Print once to start printing.

If you print more than 20 photos, you will need to reload paper

while printing. Load a maximum of 20 sheets at a time. When

you see the message “Try loading paper again,” load more

paper and press OK to continue printing. If you need to cancel

printing, press Cancel.

When printing is complete, you see the Main Menu. To print

from the Main Menu, see below.

To start the PictureMate Print Wizard again, remove and re-

insert your card (see page 3).

Choosing Photos

Press or to highlight Select Photo, then press OK.

All Photos

Press or to highlight All Photos, then press OK.

One Photo

1. Press or to highlight One Photo, then press OK.

2. Press or to highlight the photo you want to print,

then press OK.

Several Photos

1. Press or to highlight Several, then press OK.

2. Press or to highlight the photo number, then press

OK to choose it.

Tip: Hold down or to scroll quickly.

Note: If you press OK too many times, you will deselect the

photo.

3. Press or to choose the number of copies to print for

that photo (up to 10), then press OK.

4. Repeat steps 3 and 4 for additional photos. The screen

shows selected photos and the number of copies for each.

(Press or to see additional selected photos.)

Note: If you chose the wrong photo, you can deselect it.

Highlight the selected photo and press OK to uncheck it. If you

need to change the number of copies, press OK twice and

change the number as described in step 3.

5. When you’re done, press Back.

Range of Photos

1. Press or to highlight Range, then press OK.

2. Press or to choose the first photo under From.

(Make sure you choose the smaller number in your range

first.) Then press OK.

Tip: Hold down or to scroll quickly.

PictureMate

6 - PictureMate 4/04

3. Press or to choose the last photo under To. Then

press OK.

Go to “Set the Number of Copies” below to choose a number

of copies.

Camera-selected DPOF Photos

If you have chosen photos in your camera, DPOF is selected as

the Select Photo option by default. The photos that you

chose from your camera to print are automatically selected,

including the number of copies.

Just press Print to print your DPOF photos.

Deselect DPOF

If DPOF is selected and you want to choose other photos to

print instead, press or to highlight Select Photo, press

OK, then choose a different option.

Set the Number of Copies

You can print from 1 to 100 copies of your selected photos.

Keep in mind that if you are printing all photos or a range of

photos, the number of copies applies to every photo.

Note: If you are printing Several photos, you already chose the

number of copies for each photo, so the Copies setting can’t be

changed from the Main Menu. (You can choose up to 10 copies per

photo when printing Several.)

If you are printing DPOF photos, the number of copies is selected

from your camera and the Copies setting can’t be changed from the

Main Menu.

1. After selecting photos on the Main Menu, press or to

highlight Copies, then press OK.

2. Press or to highlight the number of copies you want

to print for each photo (1 to 100), then press OK.

3. Continue with the next section to choose a layout for your

photos.

Choose a Layout

1. On the Main Menu, press or to choose Layout, then

press OK.

2. Press or to highlight the layout setting you want for

your photo(s), then press OK.

You have four choices:

3. Continue with the next section to confirm your selections

and print.

Confirm and Print

Once you have made all the basic print settings, you are ready

to print.

1. Press Print.

2. Check the selected photos, number of copies, and layout

setting on the Print Confirmation screen. (Press or

to see additional selected photos.)

❏If the list is okay, press Print again to print your

photo(s).

❏To make changes, press Cancel to go back.

Borderless Proof Sheet

(20 per sheet)

Border Wallet

(2 per sheet)

PictureMate

4/04 PictureMate - 7

Note: If the Print Confirmation is off, you will not see the screen

above and only need to press Print once.

If you print more than 20 photos, you will need to reload paper

while printing. Load a maximum of 20 sheets at a time. When

you see the message “Try loading paper again,” load more

paper and press OK to continue printing. If you need to cancel

printing, press Cancel.

Doing More With Your PictureMate

The More Options menu on PictureMate lets you modify

your prints, as follows:

❏Print photos in black and white or a sepia tone

❏Crop and print only part of one photo

❏Correct or enhance photo prints

❏Print the time and/or date with photos

See the Using PictureMate Without a Computer book for more

information.

Replacing Ink and Paper

When PictureMate is low on ink or you are out of paper, it is

time to buy a new PictureMate Print Pack (includes a

PictureMate Photo Cartridge and 100 sheets of PictureMate

Photo Paper) and replace the Photo Cartridge.

Tip: You can check the ink level at any time (see the Using

PictureMate Without a Computer book).

Caution: Refilling the photo cartridge could result in damage to

PictureMate from ink spills.

Note: Use your PictureMate Photo Cartridge within six months of

installing it and before the expiration date on the package. For

PictureMate Photo Paper storage and handling tips, see page 8.

Remove the Used Photo Cartridge

Make sure you have a new PictureMate Photo Cartridge

before you begin. Once you start replacing a cartridge, you

must complete all the steps in one session.

Caution: Before you replace the cartridge, read the “Photo Cartridge

Saftey Instructions” in the Using PictureMate Without a Computer

book.

1. If PictureMate is on, press the On button to turn it off.

2. Wait until the LCD screen goes blank, then disconnect the

power cable and USB cable (if connected).

3. Flip the handle over to the front.

4. Open the cartridge door on the back of PictureMate

5. Set the lever into the Release position by sliding it in the

direction shown. This releases the cartridge.

6. Carefully pull out the cartridge.

Warning: Keep ink cartridges out of the reach of children and do

not drink the ink.

If ink gets on your hands, wash them thoroughly with soap and

water. If ink gets in your eyes, flush them thoroughly with

water. If discomfort or vision problems continue after flushing,

see a doctor immediately.

PictureMate

8 - PictureMate 4/04

Insert the New Photo Cartridge

1. Shake the cartridge four or five times while it is still

wrapped in its packaging.

2. Unwrap the cartridge.

Caution: Don’t touch the green circuit board. Install the photo

cartridge immediately after you remove it from its package. If

you leave a cartridge unpacked for a long time before using it,

normal printing may not be possible.

3. Make sure the lever is moved to the left before you insert

the cartridge, then carefully slide the cartridge, label side up,

into the slot.

4. Push the cartridge in slowly in the middle until you hear it

click into place lightly and feel slight resistance.

5. Hold the cartridge in place as you move the lever to the

Lock position by sliding it in the direction shown.

6. Close the cartridge door.

7. Move the handle over to the back.

8. Reconnect the power cord. If you’re using a computer or

external drive, reconnect the USB cable to PictureMate.

9. Turn PictureMate back on.

When PictureMate recognizes the new photo cartridge, it

starts charging the ink, and you see an ink charging

message. When charging is complete, you can begin

printing again.

Store and Display PictureMate Prints

Photos printed on PictureMate Photo Paper will give you

beautiful, long lasting images. Follow these guidelines to

ensure they will look great for years.

Store Your Prints

❏To avoid scratches or smudging, do not rub the printed side

of the photo.

❏If you stack photos, do not stack them with the printed

sides touching.

Display Your Prints

❏To ensure prints will last as long as possible, store them in

glass frames or photo albums.

❏Keep prints out of direct sunlight to prevent fading.

❏Let prints sit for 24 hours before framing.

Store Unused Paper

Return unused paper to the original package. Store paper away

from extreme temperatures, high humidity, and bright light.

Cleaning the Print Head

If your print quality is not as good as it used to be, your

photos are light or faint, or you are missing colors in your

prints, your PictureMate’s print head nozzles may be clogged.

Follow these steps to clean the print head:

1. On the Main Menu, press or to highlight More

Options, then press OK.

PictureMate

4/04 PictureMate - 9

2. Press or to highlight Maintenance, then press OK.

3. Press or to highlight

Clean Print Head, then press

OK.

4. When you see this message, press OK to begin cleaning the

print head.

The cleaning takes several seconds, during which the

message Cleaning print head. Please wait. appears on the

screen.

5. When cleaning is complete, you see a message asking if you

want to print a nozzle check pattern. If you want to check to

see if the nozzles are clean, load a sheet of photo paper (see

page 2), then press OK to print the nozzle check.

If you don’t want to print a nozzle check, press Cancel to

go back to the Main Menu.

6. Check the pattern to see if there are any gaps in the lines.

If there are gaps, press OK to clean the print head again. If

there are no gaps, press Cancel to go back to the PictureMate

Main Menu.

Aligning the Print Head

If you have moved PictureMate and print quality is not as

good as it was before—for example, you see misaligned

vertical lines or light or dark horizontal banding—you may

need to align the print head.

1. Load a sheet of photo paper (see page 2).

2. On the Main Menu, press or to highlight More

Options, then press OK.

3. Press or to highlight

Maintenance, then press OK.

4. Press or to highlight

Align Print Head, then press

OK.

5. Press Print when you see the next message.

6. After the pattern prints, look at it to see which line pattern

is the straightest. (You may need to use a magnifying glass.)

7. Press or to highlight the number for the best pattern

(1 to 15) in set #1, then press OK.

8. Press or to highlight the number for the best pattern

(1 to 15) in set #2, then press OK.

9. Press OK to exit the alignment screen. The Main Menu

appears on the screen.

Okay

Needs

cleaning

Example of

straightest

line pattern

PictureMate

10 - PictureMate 4/04

Taking PictureMate With You

The handle on PictureMate makes it easy to carry PictureMate

short distances (from one room to the next, for example). If

you take your PictureMate a longer distance, you should pack

it carefully to make sure it isn’t damaged.

Caution: To avoid damaging your PictureMate, keep it

out of the sun and don’t leave it in your car or other

location where it can get too hot.

1. If PictureMate is on, press On to turn it off.

2. Wait until the LCD screen goes blank, then unplug the

power cord from the outlet.

3. Remove paper from the paper support and output tray.

4. Push down the top of the paper support and close it against

PictureMate. Then close the output tray.

5. Disconnect the power cord and any connected USB cable

from the back of PictureMate.

6. Pack PictureMate and its power cable (both parts) into the

box that PictureMate came in, or in the optional

PictureMate Carrying Case.

Caution: Make sure the photo cartridge is installed before

transporting. Don’t place PictureMate on its side or upside

down, or ink may leak.

Note: If your prints don’t look as good after PictureMate has

been moved, try aligning the print head (see page 9).

Beliebte Drucker Handbücher anderer Marken

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Brother

Brother 1440 - HL B/W Laser Printer Kurzanleitung

Fuji Xerox

Fuji Xerox DocuPrint P375 dw Bedienungsanleitung

WOOSIM

WOOSIM PORTI-S30 Bedienungsanleitung

Olivetti

Olivetti PG L2140 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 224e Bedienungsanleitung

Canon

Canon LBP113w Bedienungsanleitung

Xerox

Xerox DocuColor 5000 Bedienungsanleitung

Canon

Canon PRO-500 Series Einrichtungshandbuch

Lexmark

Lexmark Infoprint 1332 Bedienungsanleitung