Epson SpectroProofer Mounter 17" Bedienungsanleitung

User’s Guide

NPD4282-00 EN

Copyrights and Trademarks

No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical,

photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. The information contained herein is designed

only for use with this Epson printer. Epson is not responsible for any use of this information as applied to other printers.

Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses

incurred by the purchaser or third parties as a result of accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to

this product, or (excluding the U.S.) failure to strictly comply with Seiko Epson Corporation’s operating and maintenance instructions.

Seiko Epson Corporation shall not be liable for any damages or problems arising from the use of any options or any consumable products other than those

designated as Original Epson Products or Epson Approved Products by Seiko Epson Corporation.

Seiko Epson Corporation shall not be held liable for any damage resulting from electromagnetic interference that occurs from the use of any interface cables

other than those designated as Epson Approved Products by Seiko Epson Corporation.

EPSON

, EPSON STYLUS

and SpectroProofer

are registered trademarks, and EPSON EXCEED YOUR VISION or EXCEED YOUR VISION is a

trademark of Seiko Epson Corporation.

Microsoft

, Windows

, and Windows Vista

are registered trademarks of Microsoft Corporation.

Mac and Mac OS are registered trademarks of Apple Inc.

General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any

and all rights in those marks.

SpectroProofer Mounter 17" User’s Guide

Copyrights and Trademarks

Contents

Copyrights and Trademarks

Safety Instructions

SafetyInstructions.........................4

MeaningofMarks..........................4

Introduction

MounterParts............................5

SpectroProoferMounter17"................5

Color Measurement Device(ILS20EP/

ILS20EPUV)............................6

HandlingInstructions.......................7

Color Measurement Device (ILS20EP/

ILS20EPUV)............................7

Backing...............................7

Mounter...............................7

How To Use

Procedures...............................8

PowerSupply.............................8

SupportedMedia..........................9

NotesAfterInstallingtheMounter............11

MeasuringColor..........................11

StartingSpectroProoferUtilities............11

Colorcalibration........................11

Preparing and executing a color measurement

job..................................12

Maintenance

Cleaningprocedures.......................13

CleaningtheILS20EP/ILS20EPUV..........13

Cleaning the surface of the backing/white

calibrationtile............................14

Cleaningthepaperpresser...................15

Cleaningthepaperguideunit................16

Troubleshooting

WhenErrorMessageAppears................17

Troubleshooting..........................19

When Ink Gets on the Front or Back Side of the

Paper................................19

When SpectroProofer Utilities Ends with an

Error................................19

Something Wrong with Color Measurement

Data.................................19

Appendix

MovingorTransporting....................20

SystemRequirements......................20

Specifications............................20

Where To Get Help

TechnicalSupportWebSite..................22

ContactingEpsonSupport...................22

BeforeContactingEpson..................22

HelpforUsersinNorthAmerica............23

HelpforUsersinEurope..................23

HelpforUsersinAustralia................23

HelpforUsersinSingapore................24

HelpforUsersinThailand................24

HelpforUsersinVietnam.................24

HelpforUsersinIndonesia................24

HelpforUsersinHongKong..............25

HelpforUsersinMalaysia.................25

HelpforUsersinIndia...................25

HelpforUsersinthePhilippines............26

SpectroProofer Mounter 17" User’s Guide

Contents

Safety Instructions

Read all of these instructions before using your product.

Also be sure to follow all warnings and instructions

marked on the product.

❏Do not insert objects through the slots. Take care

not to spill liquid on the product.

❏Except as specifically explained in your

documentation, do not attempt to service the

product yourself.

❏Unplug the printer on which SpectroProofer

Mounter is installed, and refer servicingto qualified

service personnel under the following conditions:

liquid has entered the product; the product has been

dropped or the cabinet damaged; the product does

not operate normally or exhibits a distinct change

in performance.

Meaning of Marks

Warnings

must be followed carefully to avoid bodily injury.

Cautions

must be observed to avoid damage to your

equipment.

Notes

contain important information and useful tips on the

operation of the product.

SpectroProofer Mounter 17" User’s Guide

Safety Instructions

Introduction

Mounter Parts

SpectroProofer Mounter 17"

Front

AHandles

Use the handles when installing or removing the

SpectroProofer Mounter 17".

BFront Cover

Open the cover when installing or removing

ILS20EP/ILS20EPUV, connecting cables, or

performing maintenance.

Caution:

Except for in the situations mentioned above, do

not open the cover. Otherwise, the device may not

work correctly.

CPaper Presser

Holds the paper during measuring color.

DILS DC cable

Supplies power to ILS20EP/ILS20EPUV.

EILS communication cable

Receives data from ILS20EP/ILS20EPUV.

FColor Measurement Device carriage

Install ILS20EP/ILS20EPUV here.

Rear

AAir vent

Takes in air to dry the color measurement chart

printed by the printer.

Do not block or clog the air vent. Otherwise, air

cannot be taken in and prints will not be dried

sufficiently. Clean the vent if it is dusty.

BSide Cover

Open the cover when connecting or removing the

printer connection cable.

CPrinter connection cable

Connect the mounter to your printer with this cable.

DPower connector(base)

Supplies power to the mounter from the printer.

EWhite calibration tile holder insert slot

Insert the white calibration tile holder here.

FBacking insert slot

Insert white or black backing here.

SpectroProofer Mounter 17" User’s Guide

Introduction

Accessories

ABacking

Backing are plates placed underneath the paper

during color-measurement. Attach either black or

white backing to the mounter.

Note:

Choose the white or the black backing depending on your

needs.

If you have used a color measurement device previously,

refer to its specification.

BWhite calibration tile holder

Holds the white calibration tile.

CPaper guide unit for SpectroProofer Mounter

Install this guide when using the mounter to correct

the paper path.

Color Measurement Device

(ILS20EP/ILS20EPUV)

Note:

The Color Measurement Device may be sold separately.

In this case, you need to purchase ILS20EP or

ILS20EPUV depending on your needs.

ALens

Scans the print when measuring colors.

BDC connector

Attach the DC connector to the ILS DC cable located

on the Color Measurement Device carriage, placed

at the front of the mounter.

CCommunication connecter

Attach this connecter to the ILS communication

cable located on the color measurement device

carriage on the base of the mounter.

DWhite calibration tile

The white-based tile for color measurement data.

Use this tile by attaching the white calibration tile

holder.

Caution:

Use ILS20EP/ILS20EPUV and the white

calibration tile contained in the set that comes with

this product.

ILS20EP/ILS20EPUV and the white calibration tile

are adjusted to be a set, and given the same number

in the factory. If you purchase two or more products,

make sure that you use the same numbered devices

in pairs.

The label of the white calibration tile

The label of ILS20EP/ILS20EPUV

SpectroProofer Mounter 17" User’s Guide

Introduction

Handling Instructions

Color Measurement Device

(ILS20EP/ILS20EPUV)

❏Do not touch the lens directly or place the lens face

down.

If a scratch, dirt or other matter gets on the lens, it

may affect the color measuring result.

❏Do not touch the white surface of the white

calibration tile.

If a scratch, dirt or other matter gets on the surface,

it may affect the color measuring result.

Caution:

Do not break or lose the white calibration tile. You

cannot buy the white calibration tile by itself. You

need to purchase ILS20EP/ILS20EPUV set.

Backing

Take care to prevent a scratch or dirt getting on the

surface of the backing.

If a scratch, dirt or other matter gets on the backing, it

may affect the color measuring result.

Caution:

Do not drop or knock it against hard objects because

the backing is a fragile part.

Mounter

Do not touch the following parts during operation.

Unnecessary touching the inside of the mounter may

damage the product.

SpectroProofer Mounter 17" User’s Guide

Introduction

How To Use

This product is an automated color measurement system that can be installed on the printer. For supported printers,

see the catalog or the printer's manual.

This section introduces color measurement procedures using the SpectroProofer Utilities found on the Software Disc

(SpectroProofer Software Disc) supplied with this product.

Note:

To use the SpectroProofer Utilities, you need to install the Epson printer driver on your computer inadvance. You cannot use

this utility with printers that are not supported by the Epson printer driver.

Procedures

AConfirming the printer setup

Make sure to complete the printer setup (setting up the printer and installing the printer driver). Turn on the printer and make

sure it is in the ready state.

BColor calibration USee “Color calibration” on page 11

Calibrate your printer using Printer Linearization in the SpectroProofer Utilities.

CColor measurement USee “Preparing and executing a color measurement job” on page 12

Select a job by starting Preparing and executing a color measurement job in the SpectroProofer Utilities.

When you start Job status confirmation on the SpectroProofer Utilities, you can check the status of the current job.

See the online help for details.

Power Supply

This product has no power button.

The power is on when you connect the printer connection cable and turn on the printer.

The power is off when you turn off the printer.

Caution:

When using this product, first connect the printer connection cable, and then turn on the printer. This product does not

work correctly if you connect the printer connection cable when the printer is on.

SpectroProofer Mounter 17" User’s Guide

How To Use

Supported Media

This product supports the following media types.

Note:

For SpectroProofer Utilities, see the online help for supported media types.

Paper Size

(for roll paper/cut

sheets)

❏Automated color measurement

Paper width: 203 mm (8 inches) ~ 432 mm (17 inches)

Paper length: 254 mm (10 inches) ~ 594 mm (A2 vertical length)

❏Manual color measurement

Paper width: 203 mm (8 inches) ~ 432 mm (17 inches)

Paper length: 323 mm ~ 594 mm (A2 vertical length)

SpectroProofer Mounter 17" User’s Guide

How To Use

Paper Type Roll paper Premium Glossy Photo Paper (250)

Premium Semigloss Photo Paper (250)

Premium Luster Photo Paper (260)

Premium Semimatte Photo Paper (260)

Photo Paper Gloss 250

Premium Glossy Photo Paper (170)

Premium Semigloss Photo Paper (170)

Enhanced Matte Paper

Epson Proofing Paper Commercial

Epson Proofing Paper Publication

Epson Proofing Paper White Semimatte

Ultra Smooth Fine Art Paper

Watercolor Paper - Radiant White

Cut sheet Premium Glossy Photo Paper

Premium Photo Paper Glossy

Premium Semigloss Photo Paper

Premium Photo Paper Semi-gloss

Premium Luster Photo Paper

Ultra Premium Photo Paper Luster

Enhanced Matte Paper

Archival Matte Paper

Ultra Premium Presentation Paper Matte

Watercolor Paper - Radiant White

Epson Proofing Paper White Semimatte

Ultra Smooth Fine Art Paper

Velvet Fine Art Paper

* Although there is no length limit for color measurement performance for roll paper, we cannot guarantee color measurement

accuracy for paper that is longer than A2 vertical length (594.0 mm).

SpectroProofer Mounter 17" User’s Guide

How To Use

Andere Handbücher für SpectroProofer Mounter 17"

Inhaltsverzeichnis

Andere Epson Drucker Handbücher

Epson

Epson Aculaser M2000 series Bedienungsanleitung

Epson

Epson Stylus Pro 9900 Bedienungsanleitung

Epson

Epson L800 Bedienungsanleitung

Epson

Epson AL-C3000 Series Originalbetriebsanleitung

Epson

Epson U950 - TM B/W Dot-matrix Printer Bedienungsanleitung

Epson

Epson U925 - TM B/W Dot-matrix Printer Bedienungsanleitung

Epson

Epson Stylus Photo PX700W Montageanleitung

Epson

Epson PictureMate Show - PM 300 - PictureMate Show Digital... Bedienungsanleitung

Epson

Epson Stylus N11 - Ink Jet Printer Bedienungsanleitung

Epson

Epson WorkForce Pro WP-4500 Series Bedienungsanleitung

Epson

Epson Stylus color 600 Bedienungsanleitung

Epson

Epson TM-T88IV ReStick Bedienungsanleitung

Epson

Epson WF-5190 Bedienungsanleitung

Epson

Epson EPL-5700L Einrichtungshandbuch

Epson

Epson R220 - Stylus Photo Color Inkjet Printer Bedienungsanleitung

Epson

Epson C11C417001 - Stylus Photo 820 Color Inkjet... Abmessungen

Epson

Epson NPD4908-00 EN Bedienungsanleitung

Epson

Epson Stylus 1500 Bedienungsanleitung

Epson

Epson TM-L90-i Leitfaden

Epson

Epson SC-S80600 Series Bedienungsanleitung

Epson

Epson Aculaser CX28DN Series Bedienungsanleitung

Epson

Epson TM-L90 series Bedienungsanleitung

Epson

Epson TM-T81M Series Bedienungsanleitung

Epson

Epson LQ-2090 Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Lexmark

Lexmark 1400 Series Handbuch

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Canon

Canon CLBR 460ps Bedienungsanleitung

Eltron

Eltron P210 Guide Bedienungsanleitung

Ricoh

Ricoh MD-P1 Bedienungsanleitung

Canon

Canon imagePASS-A2 Bedienungsanleitung

Canon

Canon S820D Bedienungsanleitung

IRA3D

IRA3D POETRY4 Bedienungsanleitung

Ricoh

Ricoh Aficio AP400 Bedienungsanleitung

BIXOLON

BIXOLON SRP-352plusV Bedienungsanleitung