Epson Stylus Pro 4800 Portrait Edition Bedienungsanleitung

R4CD400

Setup Guide Rev. C

COVER1.FM A4 size

12/15/04

Proof Sign-off:

KOW M.Arai K.Nishi

K.Nishi

NOC K.Lee

English

Setup Guide

Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Assembling the Printer . . . . . . . . . . . . . . . . . . . . . . 4

Setting Up the Printer . . . . . . . . . . . . . . . . . . . . . . . . 5

Loading Roll Paper . . . . . . . . . . . . . . . . . . . . . . . . . 7

Loading Cut-Sheet Paper . . . . . . . . . . . . . . . . . . . . 9

Connecting the Printer with Your Computer . . . . 12

Installing the Printer Software . . . . . . . . . . . . . . . . 14

Using the Online Reference Guide . . . . . . . . . . . 15

R4CD400

Setup Guide Rev. C

COVER2.FM A4 size

12/15/04

LProof Sign-off:

KOW M.Arai K.Nishi

K.Nishi

NOC K.Lee

Printer Parts

Front view

Rear view

electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. The

information contained herein is designed only for use with this Epson printer. Epson is not responsible for any use of this information as applied

to other printers.

Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or

expenses incurred by the purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications,

repairs, or alterations to this product, or (excluding the U.S.) failure to strictly comply with Seiko Epson Corporation's operating and maintenance

instructions.

Seiko Epson Corporation shall not be liable for any damages or problems arising from the use of any options or any consumable products other

than those designated as Original Epson Products or Epson Approved Products by Seiko Epson Corporation.

Seiko Epson Corporation shall not be held liable for any damage resulting from electromagnetic interference that occurs from the use of any

interface cables other than those designated as Epson Approved Products by Seiko Epson Corporation.

EPSON is a registered trademark and EPSON STYLUS are trademarks of Seiko Epson Corporation.

Microsoft and Windows are registered trademarks of Microsoft Corporation.

Apple and Macintosh are registered trademarks of Apple Computer, Inc.

General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any

and all rights in those marks.

Paper lever

Top cover

Control panel

Roll paper support

Maintenance tank

Paper tray cover

Paper tray

Front manual feed slot

Ink compartment

Ink lever

Ink cartridge slot

Roll paper cover

Rear manual

feed slot

Rear cover

Knobs

AC inlet

USB interface connector

IEEE1394 interface connector

R4CD400

Setup Guide Rev. C

ENGLISH.FM A4 size

12/15/04

Proof Sign-off:

KOW M.Arai K.Nishi

K.Nishi

NOC K.Lee

English

Safety Instructions

Read all of these instructions before using your

printer. Also be sure to follow all warnings and

instructions marked on the printer.

Warning, Cautions, and Notes

wWarnings must be followed carefully to avoid

bodily injury.

cCautions must be observed to avoid damage to

your equipment.

Notes contain important information and useful tips

on the operation of your printer.

When choosing a place for this

product

❏Place this product on a flat, stable surface that

is larger than this product. This product will

not operate properly if it is tilted or at an angle.

❏Avoid places subject to rapid changes in

temperature and humidity. Also keep this

product away from direct sunlight, strong

light, or heat sources.

❏Avoid places subject to shocks and vibrations.

❏Keep this product away from dusty areas.

❏Place this product near a wall outlet where the

plug can be easily unplugged.

❏If you use a stand, the stand must be able to

support at least 50 kg (110.3 lb).

When setting up this product

❏Use only the type of power source indicated

on this product’s label.

❏Use only the power cord that comes with this

product. Use of another cord may result in fire

or electric shock.

❏This product’s power cord is designed for use

with this product only. Using it with other

equipment may result in fire or electric shock.

❏Do not use a damaged or frayed power cord.

❏If you use an extension cord with this product,

make sure the total ampere rating of devices

plugged into the extension cord does not

exceed the cord’s ampere rating. Also, make

sure the total ampere rating of all devices

plugged into the wall outlet does not exceed

the wall outlet’s ampere rating.

❏Do not block or cover the openings in this

product’s cabinet.

When using this product

❏Do not put your hand inside this product or

touch the ink cartridges during printing.

❏Do not move the print head by hand;

otherwise you may damage this product.

❏Do not insert objects through the slots. Take

care not to spill liquid on this product.

❏Do not attempt to service this product

yourself.

❏Unplug this product and refer servicing to

qualified service personnel under the

following conditions:

The po w e r cord or pl u g i s damage d; l i q u id has

entered this product; this product has been

dropped or the cabinet damaged; this product

does not operate normally or exhibits a

distinct change in performance.

40 cm

or more

15 cm

or more 35 cm

or more

15 cm

or more

R4CD400

Setup Guide Rev. C

ENGLISH.FM A4 size

12/15/04

LProof Sign-off:

KOW M.Arai K.Nishi

K.Nishi

NOC K.Lee

When handling the ink cartridges

❏Keep ink cartridges out of the reach of

children and do not drink their contents.

❏Store ink cartridges in a cool, dark place.

❏If ink gets on your skin, wash it off with soap

and water. If ink gets in your eyes, flush them

immediately with water.

❏Shake an ink cartridge well before installing it

for best results.

cCaution:

Do not shake cartridges (that have been

installed previously) with too much force.

❏Do not use an ink cartridge beyond the date

printed on the cartridge carton.

❏Use up the ink cartridge within six months of

installation for best results.

❏Do not dismantle the ink cartridges or try to

refill them. This could damage the print head.

❏Do not touch the ink supply port or its

surrounding area and the green IC chip on the

side of the ink cartridge. Doing so may affect

normal operation and printing.

Assembling the Printer

Checking the contents

Make sure that all of the items shown are included,

and are not damaged.

Note:

❏The contents in the printer box vary by location.

❏There are 4 ink cartridges for EPSON Stylus Pro

4400 and 8 ink cartridges for EPSON Stylus Pro

4800.

Printer

Ink cartridges

Power cord

Roll paper spindle and gray attachments for

roll paper with 3-inch core

Paper tray

R4CD400

Setup Guide Rev. C

ENGLISH.FM A4 size

12/15/04

Proof Sign-off:

KOW M.Arai K.Nishi

K.Nishi

NOC K.Lee

English

Removing the protective materials

To prevent damage during shipping, your printer

is packed with several pieces of protective

material. Remove the protective material from

your printer before using it. Open the top cover,

loosen the two screws, and then pull out the

carriage fixed board.

You also need to unlock the print head, by pulling

the green tab on the left side of the print head.

Setting Up the Printer

Connecting the power cord

1. Check the label on the back of the printer to

make sure the voltage required by the printer

matches that of the wall outlet. Also, make

sure that you have the correct power cord for

your power source.

cCaution:

It is not possible to change the printer’s

voltage. If the rated voltage and your outlet

voltage do not match, do not plug in the

power cord, and contact your dealer for

assistance.

2. Connect the power cord to the AC inlet on the

back of the printer.

3. Plug the power cord into a properly grounded

wall outlet.

cCaution:

Do not use an outlet that is controlled by an

automatic timer or a wall switch; otherwise,

accidental shut down or damage to your

printer may occur.

Installing the paper tray

Insert the paper tray in the slots at the front of the

printer.

AC inlet

R4CD400

Setup Guide Rev. C

ENGLISH.FM A4 size

12/15/04

LProof Sign-off:

KOW M.Arai K.Nishi

K.Nishi

NOC K.Lee

Installing the ink cartridges

wWarning:

The ink cartridges are self-contained units.

Under ordinary use, ink does not leak from the

cartridges. If ink does get on your hands, wash

them thoroughly with soap and water. If ink gets

into your eyes, flush them immediately with

water.

Note:

❏The ink cartridges packed with your printer are

provided only for initial ink charging.

❏Because initial ink charging consumes a large

quantity of ink, you may need to replace the ink

cartridges soon.

❏Initial ink charging requires approximately

8 minutes.

❏Each slot can hold a particular color of ink. Be sure

to install the ink cartridges in the correct slots

according to the ink mode you choose.

❏The following illustration uses EPSON Stylus Pro

4800. Slot # 5 to 8 are not available on EPSON

Stylus Pro 4400.

❏The right ink compartment of EPSON Stylus Pro

4400 cannot be opened. Do not press the cover too

hard; otherwise, you may break it.

1. Turn on the printer by pressing the Power

button. After a short time NO INK CRTG appears

on the LCD.

2. Open the ink compartment cover(s) by

pushing it.

3. Raise the ink levers.

4. Remove the package from an ink cartridge,

and then shake the ink cartridge well for best

results.

No. EPSON Stylus Pro 4800 EPSON Stylus Pro 4400

#1 Matte Black or

Photo Black

Matte Black

#2 Cyan Cyan

#3 Magenta Magenta

#4 Yellow Yellow

#5 Light Black -

#6 Light Cyan -

#7 Light Magenta -

#8 Light Light Black -

1234 5678

R4CD400

Setup Guide Rev. C

ENGLISH.FM A4 size

12/15/04

Proof Sign-off:

KOW M.Arai K.Nishi

K.Nishi

NOC K.Lee

English

5. Hold the ink cartridge with the arrow mark

facing up and pointing to the rear of the

printer, and then insert it in the slot.

6. Repeat steps 4 to 5 to install the other ink

cartridges.

7. After inserting all ink cartridges in their

corresponding slot, lower the ink levers. The

printer starts initial ink charging.

8. After approximately two minutes, ink lever

messages appear on the LCD. Raise or lower

the ink levers accordingly until READY appears

on the LCD, which indicates initial ink

charging is completed.

cCaution:

Never perform the following tasks while the

Pause light is flashing; otherwise, damage

may occur.

❏Turn off the printer.

❏Open the top cover.

❏Remove the rear cover.

❏Move the paper lever to the released

position.

❏Remove the ink cartridges.

❏Remove the maintenance tank.

❏Unplug the power cord.

9. Close the ink compartment cover(s).

Note:

If you have installed 220 ml ink cartridges, do not

close the ink compartment cover(s).

Loading Roll Paper

Attaching the roll paper to the

spindle

When installing the roll paper onto the spindle,

follow the steps below.

1. Slide the movable flange off the end of the

spindle.

2. When attaching roll paper with a 3-inch core,

keep the gray attachments attached.

When attaching the roll paper with a 2-inch

core, remove the gray attachments from the

flange.

Note:

Keep the gray attachments in a safe place for future

use.

3. Place the roll paper on a flat surface so that it

does not unwind. Slide the roll paper onto the

spindle and onto the flange until it fixes into

place.

Note:

Do not stand the spindle when attaching the roll

paper. It may cause slant paper feeding.

R4CD400

Setup Guide Rev. C

ENGLISH.FM A4 size

12/15/04

LProof Sign-off:

KOW M.Arai K.Nishi

K.Nishi

NOC K.Lee

4. Slide the movable flange (removed in step 1)

onto the spindle and into the end of the roll

paper until it fixes into place.

Attaching roll paper to the printer

To attach roll paper to the printer, follow the steps

below.

1. Open the roll paper cover.

2. Make sure that the movable flange is fixed into

the end of the roll paper properly.

3. Hold the roll paper spindle so that the black

movable flange is on the left side. Then place

the spindle in the groove located on the top of

the printer.

4. Move the paper lever to the released position.

5. Hold the both sides of the paper, and load the

paper in the paper insertion slot.

6. Pull the paper until it hangs down over the

paper tray.

Note:

If thin paper is loaded, press the Paper Feed

button to decrease the value of paper suction. If

thick and curled paper is loaded, press the Paper

Feed button to increase the value of paper

suction.

Black movable flange

R4CD400

Setup Guide Rev. C

ENGLISH.FM A4 size

12/15/04

Proof Sign-off:

KOW M.Arai K.Nishi

K.Nishi

NOC K.Lee

English

7. Hold both the fixed and movable flanges, and

rewind the paper to the line marked with an

arrow mark.

8. Move the paper lever to the secured position.

The printer automatically feeds the paper to

the printing position.

9. Close the roll paper cover.

10. Raise the roll paper support.

11. Extend the paper tray and the paper tray cover

according to the paper length to be used for

printing.

12. Press the Paper Source button to select Roll

Auto Cut On on the LCD.

cCaution:

Do not leave the paper in the printer for a long

period of time; its quality will deteriorate. We

recommend that you remove the paper from the

printer after printing.

Loading Cut-Sheet Paper

To load cut-sheet paper in the paper tray, follow

the steps below.

Note:

This section describes loading cut-sheet paper smaller

than A3 size. If you want to load A3 or a larger paper,

or if you want to know the details of paper handling, see

"Paper Handling" in the Reference Guide included on

the Printer Software CD-ROM shipped with your

printer.

1. Make sure the printer is on and in the READY

state.

2. Press the Paper Source button to select

Sheet on the LCD.

R4CD400

Setup Guide Rev. C

ENGLISH.FM A4 size

12/15/04

LProof Sign-off:

KOW M.Arai K.Nishi

K.Nishi

NOC K.Lee

3. Lift up the paper tray cover, and then pull the

paper guide roller up.

4. Raise the paper guide, and then slide the edge

guide to the left slightly wider than the width

of your paper.

5. Fan a stack of paper, and then tap it on a flat

surface to even the edges.

If the paper is curled, flatten it before you load

it. If it curls excessively and jams frequently,

stop using it.

6. Clean the inside of the tray to remove any

dust. Dust may decrease the printout quality.

7. Load the sheets with the printable side facing

down and the right edge of the paper resting

against the right side of the paper tray.

Note:

❏Always set the paper’s short edge first.

❏Make sure the sheets lie flat on the bottom of

the tray, and put the edge of the paper against

the right inner corner of the paper tray;

otherwise, printing may become misaligned.

❏The loadable capacity of paper in the paper tray

differs depending on the media and its size.

The paper tray can hold up to 250-sheets of

17 lb or 64 g/m² plain paper. Do not load the

paper above the arrow mark on the inside

surface of the left edge guide.

For information on the loadable capacity of

Epson special media, see the following table.

Epson special

media

Size Loadable

capacity in the

paper tray

Premium

Semigloss Photo

Paper

A4 100

LTR 100

A3 50

Super

A3/B

Premium Luster

Photo Paper

LTR 100

A3 50

Super

A3/B

Photo Quality Ink

Jet Paper

A4 200

LTR 200

EPSON Proofing

Paper Semimatte

(Commercial)

Super

A3/B

Andere Handbücher für Stylus Pro 4800 Portrait Edition

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Epson Drucker Handbücher

Epson

Epson SL-D700 Bedienungsanleitung

Epson

Epson Stylus TX220 Bedienungsanleitung

Epson

Epson FX-80 Bedienungsanleitung

Epson

Epson AcuLaser C4000 Bedienungsanleitung

Epson

Epson WorkForce Pro WP-M4015 Bedienungsanleitung

Epson

Epson SureColor T3170M Bedienungsanleitung

Epson

Epson Stlyus Photo 1500W Bedienungsanleitung

Epson

Epson Stylus NX230 Bedienungsanleitung

Epson

Epson WorkForce 60 Bedienungsanleitung

Epson

Epson XP-211 Bedienungsanleitung

Epson

Epson SecurColor TM-C3400 Bedienungsanleitung

Epson

Epson Stylus Pro GS6000 Bedienungsanleitung

Epson

Epson Stylus Pro XL Bedienungsanleitung

Epson

Epson TM-T70II Bedienungsanleitung

Epson

Epson AcuLaser C3800N Bedienungsanleitung

Epson

Epson TM-T81M Series Bedienungsanleitung

Epson

Epson ET-M2120 Series Bedienungsanleitung

Epson

Epson Mobilink TM-P60 Bedienungsanleitung

Epson

Epson WF-3520 Series Benutzerhandbuch

Epson

Epson SC-S30600 Bedienungsanleitung

Epson

Epson 785EPX - Stylus Photo Color Inkjet Printer Bedienungsanleitung

Epson

Epson TM-P80 Gebrauchs- und Pflegehandbuch

Epson

Epson NPD4909-01 Bedienungsanleitung

Epson

Epson SC-S80600 Series Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Brother

Brother 1440 - HL B/W Laser Printer Kurzanleitung

Fuji Xerox

Fuji Xerox DocuPrint P375 dw Bedienungsanleitung

WOOSIM

WOOSIM PORTI-S30 Bedienungsanleitung

Olivetti

Olivetti PG L2140 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 224e Bedienungsanleitung

Canon

Canon LBP113w Bedienungsanleitung

Xerox

Xerox DocuColor 5000 Bedienungsanleitung

Canon

Canon PRO-500 Series Einrichtungshandbuch

Lexmark

Lexmark Infoprint 1332 Bedienungsanleitung