Epson EB-X31 Bedienungs- und Wartungshandbuch
EPSON EB-X31 PROJECTOR
1
BASIC USERS GUIDE –PLEASE READ BEFORE USE –CONNECTING TO THE PROJECTOR [TEST VERSION}
Place the projector on a level flat surface that allows air to circulate freely around it.
•DO NOT USE THE PROJECTOR ON ITS SIDE
•DO NOT DISCONNECT THE USB CABLE OR TURN OFF THE PROJECTOR UNTIL HAS THE
PROJECTOR DISPLAYED AN IMAGE
This projector can be connected to a laptop, USB, video and audio sources to display presentations,
movies or other images, with or without sound. A commercially available RCA audio cable is needed for
sound.
For slide shows/presentations without a computer, insert a USB/pen or flash drive or camera cable in
USB-A port.
To set the projection height/angle, hold in the grey button under the lens at the front. A leg will drop
down. To set the leg height hold the grey button in, adjust to desired height, then release the grey
button. This will lock the height. If the image is tilted, use the adjustable back feet to adjust it.
Plug the projector in to the mains using the black lead, but do not turn on yet. The nearer the projector
is to the screen, then the smaller the image becomes. If space is limited, this can be overridden
somewhat via the W-T slider. [W-T = Wide –Tele]
You can play sound through the projector's speaker system by connecting a commercially available RCA
audio cable to the laptop's headphone or audio-out jack. This is not supplied in the bag.
For video & audio displays –you need to install the Epson USB Display software to your laptop. See p22
on the disc in the carrier case’s front pocket for instructions. This only needs to be done the once.
To connect to a laptop –connect using the double-ended 15-DIN VGA cable [black with blue ends].
[VGA = Video Graphics Array]. This will only go in one way, but it does not matter which end goes
where. Leave the screws of both ends loose because if the cable is accidentally pulled sharply during
use, then the cable will dislodge instead of dragging the projector/laptop with it.
EPSON EB-X31 PROJECTOR
2
NOTE: To connect a Mac that has only a Mini Display Port, Thunderbolt port, or Mini-DVI port for video
output, you need to an adapter that allows you to connect to the projector's VGA video port. This is not
supplied in the bag. Contact Apple for compatible adapter options.
To connect a USB –Insert your USB flash/pen drive in the USB_A port
To disconnect, remove it from the projector.
To connect to a mobile device [e.g. smart phone or tablet –Connect as above using the white MHL
cable. [MHL = Mobile High-definition Link]. You may need an extra connecting VGA cable to link your
device to the MHL cable. The projector only works if your mobile device is compatible.
Disconnecting a USB Device - Turn off & unplug the USB device, THEN disconnect it from the projector.
Connecting to a Computer for HDMI Video and Audio - Connect the HDMI cable to your computer's
HDMI output port and to the projector.
Connecting to Video Sources - Connect the HDMI cable to your video source's HDMI output port and to
the projector’s HDMI port.
EPSON EB-X31 PROJECTOR
3
Connecting to an HDMI Video Source –If your video source has an HDMI port, you can connect it to the
projector using a commercially available HDMI cable and send the image source's audio with the
projected image. CONNECT THE CABLE TO BOTH DEVICES BEFORE TURNING THE VIDEO ON. It could
damage the projector.
OPERATING THE PROJECOR
Turning it on
Plug in the connected power cable. Push it in firmly. The POWER indicator will turn blue, showing it is
in standby mode. Now press the ON button on the projector [or the remote control] and the STATUS
indicator will flash, showing it is warming up. When it is a constant blue light, you can go ahead.
Slide the lens cover to the right. Sliding it to the left during the presentation will temporarily hide the
image and mute any sound.
Turn on the connected computer/device. Or, insert a DVD or other video media, and press play.
Press the [Source Search] button on the control panel or remote control to detect the source.
Press the button for the desired video source on the remote control.
If the Home screen is displayed, select the source you want to project from the source list on the left by
using the arrow buttons on the remote control and press enter.
To increase the size of the image, use the W-T wheel.
To increase the clarity of the image, use the wheel in front of the W-T wheel.
The make the image more square, use the Keystone slider on the projector top near the wheels.
Turning it off
Please turn off the projector off when it is not in use to prolong its life. Lamp life varies depending on a
variety of conditions and usage. Brightness decreases overtime. Lamps are very expensive!
Press the power button on the control panel or remote control. The projector displays a shut down
confirmation screen. Press the power button again. (To leave it on, press any other button.) The
EPSON EB-X31 PROJECTOR
4
projector beeps twice, the lamp turns off, and the status indicator turns off. Ensure the power indicator
is blue (but not flashing) and the status indicator is off, then unplug the power cord. There is no cool-
down period so you can pack up the projector for transport right away. Remember to close the
projector's lens cover to prevent dust entering.
REMOTE CONTROL - Aim it at the projector's receivers within 6 metres and 15 degrees. Volume
controls are on the projector top and the remote control.
Inhaltsverzeichnis
Andere Epson Projektor Handbücher
Epson
Epson ActionPrinter 4000 Bedienungsanleitung
Epson
Epson PowerLite 74c Bedienungsanleitung
Epson
Epson G5000 - PowerLite XGA LCD Projector Bedienungsanleitung
Epson
Epson PowerLite 52c Installations- und Betriebshandbuch
Epson
Epson EB-PU2213B Bedienungsanleitung
Epson
Epson PowerLite Pro Z8150NL Bedienungsanleitung
Epson
Epson ChromaBlast 1.0 Bedienungsanleitung
Epson
Epson PowerLite 4650 Systemhandbuch
Epson
Epson VS350W Bedienungsanleitung
Epson
Epson EB-D6250 Bedienungsanleitung
Epson
Epson EB-G5200W Bedienungsanleitung
Epson
Epson 5350 - EMP SVGA LCD Projector Bedienungsanleitung
Epson
Epson PowerLite 905 Bedienungsanleitung
Epson
Epson V11H604320 Bedienungsanleitung
Epson
Epson 3LCD - PowerLite S4 Projector Bedienungsanleitung
Epson
Epson VS410 Bedienungsanleitung
Epson
Epson EB-L735U Bedienungsanleitung
Epson
Epson dreamio EH-R4000 Bedienungsanleitung
Epson
Epson dreamio EMP-TW980 Bedienungsanleitung
Epson
Epson Elp-3000 Bedienungsanleitung
Beliebte Projektor Handbücher anderer Marken
iEmmet
iEmmet MP-312 Bedienungsanleitung
Sony
Sony VPL-HS10 Marketing Specifications & Features Bedienungsanleitung
Sony
Sony VPL-HW65ES Service-Handbuch
Toshiba
Toshiba TLP-791U Bedienungsanleitung
Philips
Philips LC1341 Referenzhandbuch
Panasonic
Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Bedienungsanleitung
