Epson PowerLite 84 Systemhandbuch

Andere Handbücher für PowerLite 84

4

Inhaltsverzeichnis

Andere Epson Projektor Handbücher

Epson

Epson LS500WATV Technisches Datenblatt

Epson

Epson RS-353 Bedienungsanleitung

Epson

Epson PowerLite 1760W Bedienungsanleitung

Epson

Epson PowerLite 8300i withEasyMP.net module Bedienungsanleitung

Epson

Epson PowerLite 400W Montageanleitung

Epson

Epson ESC/VP21 Bedienungsanleitung

Epson

Epson EH-LS500W Bedienungsanleitung

Epson

Epson EB-435W guide Bedienungsanleitung

Epson

Epson PowerLite 50c Bedienungsanleitung

Epson

Epson Dreamino EMP-TW20 Bedienungsanleitung

Epson

Epson MegaPlex MG-850HD Bedienungsanleitung

Epson

Epson EB-PU2213B Bedienungsanleitung

Epson

Epson BrightLink 455Wi Bedienungsanleitung

Epson

Epson 826W - PowerLite WXGA LCD Projector Abmessungen

Epson

Epson VS210 Bedienungsanleitung

Epson

Epson MovieMate 85HD Bedienungsanleitung

Epson

Epson PowerLite 5600p Bedienungsanleitung

Epson

Epson MovieMate 85HD Referenzhandbuch

Epson

Epson LightScene EV-115 Bedienungsanleitung

Epson

Epson EB-G6170 Bedienungsanleitung

Epson

Epson EB-W16 Bedienungsanleitung

Epson

Epson LS11000 Bedienungsanleitung

Epson

Epson V11H319220 - MovieMate 60 LCD Projector Bedienungsanleitung

Epson

Epson EH-TW6600W Bedienungsanleitung

Beliebte Projektor Handbücher anderer Marken

iEmmet

iEmmet MP-312 Bedienungsanleitung

Sony

Sony VPL-HS10 Marketing Specifications & Features Bedienungsanleitung

Sony

Sony VPL-HW65ES Service-Handbuch

Toshiba

Toshiba TLP-791U Bedienungsanleitung

Philips

Philips LC1341 Referenzhandbuch

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Bedienungsanleitung

NEC

NEC NP600S EDU Bedienungsanleitung

BenQ

BenQ SH753P Bedienungsanleitung

Eiki

Eiki EK-623U series Bedienungsanleitung

Christie

Christie LHD700 Bedienungsanleitung

Navitar

Navitar FX Bedienungsanleitung

InFocus

InFocus LitePro 560 Bedienungsanleitung

Sony

Sony SRX-R815P Bedienungsanleitung

Vivitar

Vivitar DP1500 X Bedienungsanleitung

Acer

Acer C20 Series Bedienungsanleitung

Asus

Asus ZenBeam Latte Bedienungsanleitung

BOXLIGHT

BOXLIGHT CP-322i/CP-634i Bedienungsanleitung

JVC

JVC 1108TTH-AO-AO Bedienungsanleitung

INSTALLATIONHANDBOOK

Lamp and Status Information

Epson PowerLite 84

Replacing the Lamp

The life span of the projection lamp is about 5000 hours if

BrightnessControlin the Setting menu is set to High (default), and

6000 hours if BrightnessControlis set toLow.

It is time to replace the lamp when:

The projected image gets darker or starts to deteriorate.

The message Replace the lamp appears on the screen when the

lamp comes on and the lamp warning light ashes orange. To

maintain projector brightness and image quality, replace the lamp

as soon as possible.

The lamp warning light ashes red (the lamp is burnt out).

Contact your dealer or call Epson at 800-GO-EPSON

(800-463-7766). Request part number V13H010L50.

Replacing the Lamp

1. Turn o the projector.

2. When the Ppower light stops ashing, unplug the power cord.

3. Let the projector cool for at least an hour (if it has been on). The

lamp is extremely hot immediately after use.

4. Loosen the lamp cover screw (you can’t remove it). Then slide the

lamp cover and lift it o of the projector.

INSTALLATION HANDBOOK

Lamp and Status Information

Epson PowerLite 84

5. Loosen the two screws holding the lamp in place (you can’t

remove them).

Loosen, but don’t

remove these screws

6. Hold the lamp as shown and pull it straight out.

7. Gently insert the new lamp. (If it doesn’t easily, make sure it is

facing the right way.)

8. Push down the side marked PUSH until it snaps in.

note

The lamp(s) in this

product contain mercury.

Please consult your state and

local regulations regarding

disposal or recycling. Do not

put in the trash.

INSTALLATION HANDBOOK

Lamp and Status Information

Epson PowerLite 84

9. Once the lamp is fully inserted, tighten its screws.

10. Replace the lamp cover, then tighten its screw.

11. Reset the lamp timer as described page.

Resetting the Lamp Timer

After you replace the lamp, you need to reset the lamp timer using the

projector’s menus.

1. Press the

Menubutton on the remote control or on the

projector’s control panel. You see the main menu.

2. Use the buttons on the remote control (or the arrow buttons

on the projector) to highlight Reset, then press Enter.

You see this screen:

3. Select

Reset Lamp Hoursand press Enter.

4. When you see the prompt, select Yes and press Enter.

5. When you’re nished, press Esc or Menuto exit the Menu

system.