Epson PowerLite 570 Systemhandbuch

INSTALLATION HANDBOOK

Remote Control Info

Epson PowerLite 570 / 575W / 580 / 585W

Remote Control Operation

The remote control lets you control the projector from almost anywhere in the room, up to 19.7 feet (6 m)

away. You can point it at the screen or board, or the front or back of the projector.

Make sure that you aim the remote control at the projector's receivers within the angles listed here.

1 19.7 feet (6 m)

2 ± 30º

3 ± 55º

4 ± 60º

5 ± 75º

6 ± 15º

Note: Avoid using the remote control in conditions with bright fluorescent lights or in direct sunlight, or

the projector may not respond to commands. If you will not use the remote control for a long time,

remove the batteries.

Using the Remote Control as a Wireless Mouse

1. Connect the projector to a computer using the projector's USB-B,Computer, or HDMI port to

display video.

2. If you connected your computer to the Computer or HDMI port, also connect a USB cable to the

projector's USB-B port and to a USB port on your computer (for wireless mouse support).

3. Start your presentation.

You can use the projector's remote control as a wireless mouse so you can control projection at a

distance from the computer.

INSTALLATION HANDBOOK

Remote Control Info

Epson PowerLite 570 / 575W / 580 / 585W

4. Use the following buttons on the remote control to control your presentation:

•To move through slides or pages, press the up or down Page buttons.

•To move the cursor on the screen, use the arrow buttons.

•To left-click, press the button once (press it twice to double-click).

•To right-click, press the Esc button.

•To drag-and-drop, hold the button as you move the cursor with the arrow buttons, then release

at the destination.

Using the Remote Control as a Pointer

You can use the projector's remote control as a pointer to help you call out important information on the

screen. The default pointer shape is an arrow, but you can select an alternative shape using the Settings

menu.

1. Press the Pointer button on the remote control.

2. Use the arrow buttons on the remote control to move the pointer on the screen.

3. Press Esc to clear the pointer from the screen.

INSTALLATION HANDBOOK

Remote Control Info

Epson PowerLite 570 / 575W / 580 / 585W

Selecting an Image Source

If you connected multiple image sources to the projector, such as a computer and DVD player, you may

want to switch from one image source to the other.

1. Make sure the connected image source you want to use is turned on.

2. For video image sources, insert a DVD or other video media and press its play button, if necessary.

3. Do one of the following:

•Press the Source Search button on the projector or remote control until you see the image from

the source you want.

•Press the button for the source you want on the remote control. If there is more than one port for

that source, press the button again to cycle through the sources.

1 Computer port sources

2 Video and HDMI sources

3 USB port sources (computer display and external devices)

4 Network source (LAN)

INSTALLATION HANDBOOK

Remote Control Info

Epson PowerLite 570 / 575W / 580 / 585W

Projection Modes

Depending on how you positioned the projector, you may need to change the projection mode so your

images project correctly.

•Front/Upside Down (default setting) flips the image over top-to-bottom to project upside-down from a

wall or ceiling mount.

•Front lets you project from a table in front of the screen.

•Rear/Upside Down flips the image over top-to-bottom and horizontally to project from the wall or

ceiling and behind a translucent screen.

•Rear flips the image horizontally to project from behind a translucent screen.

You can change the projection mode using the remote control or by changing the Projection setting in

the Extended menu.

Changing the Projection Mode Using the Remote Control

You can change the projection mode to flip the image over top-to-bottom.

1. Turn on the projector and display an image.

2. Hold down the A/V Mute button on the remote control for five seconds.

The image disappears briefly and reappears flipped top-to-bottom.

3. To change projection back to the original mode, hold down the A/V Mute button for five seconds

again.

Changing the Projection Mode Using the Menus

You can change the projection mode to flip the image over top-to-bottom and/or left-to-right using the

projector menus.

1. Turn on the projector and display an image.

2. Press the Menu button.

3. Select the Extended menu and press Enter.

4. Select the Projection setting and press Enter.

5. Select a projection mode and press Enter.

6. Press Menu or Esc to exit the menus.

INSTALLATION HANDBOOK

Remote Control Info

Epson PowerLite 570 / 575W / 580 / 585W

Andere Handbücher für PowerLite 570

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Epson Fernbedienung Handbücher

Epson

Epson WH-5674 Bedienungsanleitung

Epson

Epson PowerLite 1720 Systemhandbuch

Epson

Epson HA90 Bedienungsanleitung

Epson

Epson EF-100BATV Installationsanleitung

Epson

Epson PowerLite Pro G5150NL Systemhandbuch

Epson

Epson G5000 - PowerLite XGA LCD Projector Systemhandbuch

Epson

Epson PowerLite Pro G5450WUNL Systemhandbuch

Epson

Epson PowerLite Home Cinema 8350 Systemhandbuch

Beliebte Fernbedienung Handbücher anderer Marken

Panasonic

Panasonic EUR7622KB0 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beo4 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung

Multiplex

Multiplex PROFI TX 9 Bedienungsanleitung

One Remote

One Remote RMB4 Bedienungsanleitung

FUTABA

FUTABA 9ZAP - PART2 Bedienungsanleitung

HR Matic

HR Matic HR MULTI 3 Bedienungsanleitung

Yamaha

Yamaha ACC-GNRST-30-20 Bedienungsanleitung

EisSound

EisSound KBSOUND Bedienungsanleitung

Marantz

Marantz RC101 Bedienungsanleitung

Conrad

Conrad FS20 TC6 Bedienungsanleitung

Anritsu

Anritsu MP1777A Bedienungsanleitung

Niles

Niles WVC100 Fehlerbehebungshandbuch

RCA

RCA RCU1300 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BEO6 Bedienungsanleitung

GE 94901 Bedienungsanleitung

Onbon

Onbon YQ1-75 Bedienungsanleitung

FUTABA

FUTABA R7108SB Montageanleitung