Epson PowerLite Home Cinema 8350 Systemhandbuch

INSTALLATION HANDBOOK

Remote Control Info

Epson PowerLite 8350 / 8700 UB

Remote Control

Source buttons

Switch between equipment

connected to the projector

Color Mode button

Optimizes viewing for

different lighting environments

Power button

Turns projector on or off

Memory button

Recalls custom

picture settings

Menu navigation

buttons

Pattern button

Displays test patterns

to adjust the image

Menu button

Displays the projector’s menus

Aspect button

Changes the picture’s aspect ratio

Esc (escape) button

Exits the current menu item

Blank button

Temporarily stops projection or

hides the menu screen

Enter/Line Menu button

Selects menu items or opens

the line menu

Gamma button

Adjusts the gamma values

of the screen display

Default button

Restores default settings

when menu is displayed

Sharpness button

Adjusts image sharpness

Illumination button

Lights the remote control

buttons for easy viewing

RGBCMY button

Adjusts the hue,

saturation, and brightness

for each color

INSTALLATION HANDBOOK

Remote Control Info

Epson PowerLite 8350 / 8700 UB

Installing Batteries in the Remote Control

The remote control uses two AA batteries.

WARNING: Keep batteries away from children. If a battery is swallowed, contact your doctor

immediately.

1. Release the tab and lift open the cover.

2. Insert two new AA batteries as shown.

3. Insert the tab on the cover and press it down until it

clicks into place.

Aim the remote control at the screen, or at the front or

back of the projector. Make sure you are within 30 feet

of the projector.

If you suspect the batteries are weak, press the illumination button. If the buttons do not

glow, replace the batteries.

Solving Remote Control Problems

The projector doesn’t respond to remote control commands.

Make sure you’re within about 30 feet of the projector, and the remote control is aimed at

the projector’s front or back sensor within the ranges shown below.

You may need to replace the remote control batteries (see page 21). Press the

illumination button and check if the buttons glow. If they don’t, replace the batteries.

Dim the room lights and turn off any fluorescent lights. Make sure the projector is not in

direct sunlight.

Turn off nearby equipment that emits infrared energy, such as a radiant room heater.

Make sure there are no objects between the remote control and the IR receiver.

Approx.60

Andere Handbücher für PowerLite Home Cinema 8350

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Epson Fernbedienung Handbücher

Epson

Epson PowerLite 570 Systemhandbuch

Epson

Epson G5000 - PowerLite XGA LCD Projector Systemhandbuch

Epson

Epson PowerLite 1720 Systemhandbuch

Epson

Epson HA90 Bedienungsanleitung

Epson

Epson WH-5674 Bedienungsanleitung

Epson

Epson EF-100BATV Installationsanleitung

Epson

Epson PowerLite Pro G5150NL Systemhandbuch

Epson

Epson PowerLite Pro G5450WUNL Systemhandbuch

Beliebte Fernbedienung Handbücher anderer Marken

Panasonic

Panasonic EUR7622KB0 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beo4 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung

FUTABA

FUTABA 9ZAP - PART2 Bedienungsanleitung

HR Matic

HR Matic HR MULTI 3 Bedienungsanleitung

Yamaha

Yamaha ACC-GNRST-30-20 Bedienungsanleitung

Marantz

Marantz RC101 Bedienungsanleitung

Anritsu

Anritsu MP1777A Bedienungsanleitung

Niles

Niles WVC100 Fehlerbehebungshandbuch

Bang & Olufsen

Bang & Olufsen BEO6 Bedienungsanleitung

GE 94901 Bedienungsanleitung

Onbon

Onbon YQ1-75 Bedienungsanleitung

FUTABA

FUTABA R7108SB Montageanleitung

Invacare

Invacare G91S Bedienungsanleitung

JR Racing

JR Racing XR2 Bedienungsanleitung

Philips

Philips SBCRU130/00U Bedienungsanleitung

Philips

Philips Prestigo SRT9320 Bedienungsanleitung

Vicon

Vicon VNCTRL-1 Bedienungsanleitung