Epson EMP Monitor Bedienungsanleitung

EMP Monitor Operation Guide

V4.30

Meanings of symbols used

The following table shows the symbols used in this manual, along with descriptions of what they mean.

Attention

Indicates procedures which may result in damage or injury if sufficient care is not taken.

Indicates additional information and points which may be useful to know regarding a topic.

sIndicates a page where detailed information regarding a topic can be found.

Procedure

Indicates operating methods and the order of operations.

The procedure indicated should be carried out in the order of the numbered steps.

[ (Name) ] Indicates the name of the buttons on the remote control or the control panel.

Example: [Esc] button

"(Name)"

Timer

Indicates the name of the buttons or items on EMP Monitor.

Example: Select "Timer" - "Timer Settings".

Select Timer - Timer Settings.

Meanings of symbols used............................. 2

EMP Monitor Features

Tasks that can be done using EMPMonitor..................... 5

Operatingenvironment...................................... 6

Compatiblecomputers...........................................6

InstallingEMPMonitor............................................6

LimitationsimposedbyaWindowsVistaenvironment......................6

Beforestartingoperations.........................................7

Using EMP Monitor

Registeringanddeletingprojectorsformonitoring............. 9

StartingEMPMonitor............................................9

Registering projectors using automatic search (Searching for and registering

projectorsthatarelocatedinthesamesegment).........................10

Proceduresforautomaticsearch..................................10

Proceduresforregistration......................................11

Setting the range of addresses to do an automatic search and registration. . . . . . . 12

Proceduresforautomaticsearch..................................12

Proceduresforregistration......................................13

RegistrationbyspecifyinganIPaddress(Manualregistration)................14

Registeringseveralprojectorstoamonitoringgroupallatonce..............16

IftheprojectornameorIPaddresschangesafterregistration................17

Forprojectorsthathavebeenregisteredmanually...................... 17

Forprojectorsthathavebeenregisteredusingautomaticsearch............17

Cancelling(deleting)projectorregistrations............................18

Monitoring window layout.................................. 19

MonitoringusingGroupingview....................................19

MeaningsofGroupingviewicons.................................19

UsingtheiconsinGroupingview.................................20

MonitoringusingDetaillistview....................................21

MeaningsofDetaillistviewicons.................................21

Selectingdisplayitems......................................... 22

Sortinglists................................................ 23

Searchingfordesiredicons(Projectorlist)..............................23

Monitoringusingthesystemtray...................................23

Displaying projectors with problem or warning statuses in a list. . . . . . . . . . . . . . . 24

Checkingpropertiesindetail......................................25

Displayinggroupproperties.....................................26

Displayingprojectorproperties................................... 26

Displayinganddeletinglogs.......................................26

Displayinglogs.............................................. 27

Deletinglogs...............................................27

Using the control functions. . ................................ 28

Carryingoutcontrolusingcontrolbuttons............................. 28

Carryingoutcontrolusingawebbrowser(Webcontrol)....................29

Carryingoutcontrolusingtimersettings..............................29

Proceduresfornewtimersettings.................................30

E-mailnotificationfunctionsettings.......................... 31

An e-mail notifying the operator of a problem/warning/status

isissued................................................... 33

Applicationlockfunction.................................... 34

Switchingapplicationlockbetweenenabledanddisabled..................34

Enablingtheapplicationlock.................................... 34

Disablingtheapplicationlock....................................34

Settingapasswordforcancellingapplicationlock........................34

Appendix

Troubleshooting............................................ 36

Projectorscannotbemonitoredorcontrolled...........................36

Ane-mailmessageisnotsentwhenaproblemoccurswithaprojector..........36

GeneralNotice............................................. 37

Trademarks.................................................. 37

Contents

EMP Monitor Features

EMP Monitor lets you carry out operations such as checking the

statuses of multiple EPSON projectors that are connected to a network

at a computer monitor, and controlling the projectors from the computer.

Following are brief descriptions of the monitoring and control functions

that can be carried out using EMP Monitor.

•Registering projectors for monitoring and control

Projectors on the network can be searched for automatically, and you

can then select projectors to be registered from the projectors that are

detected.

You can enter the IP addresses for target projectors to register them.

•Registered projectors can also be assigned to groups so that they

can be monitored and controlled in groups.

•Monitoring the statuses of registered projectors

The power status (ON/OFF) for projectors and problems or warnings

requiring attention can be checked visually by means of icons.

You can select groups of projectors or a single projector that you are

interested in, and then check the cumulative lamp operating time or

the details of information such as input sources, problems, and

warnings for these projectors.

•Controlling registered projectors

Projectors can be selected in groups or as single projectors, and you

can then carry out operations for the selected projectors such as

turning the power on and off and switching their input sources.

Web control functions can be used to change the settings in the

projector's configuration menu.

If there are certain control actions which are carried out regularly at

particular times or on particular days, you can use Timer Settings to

•Mail notification function settings

You can set e-mail addresses to which notifications are sent if a status

requiring attention, such as a problem, occurs with a projector that

has been registered.

To enable projectors to be monitored and controlled even when

they are in standby mode

, make the following settings at the

projectors. The settings that need to be made will vary depending

on the projector you are using. sProjector's User's Guide

•Set Network Monitoring to ON.

•Set Standby Mode to Network ON.

*When the projector's indicator is lit orange.

Tasks that can be done using EMP Monitor

Compatible computers

Only Windows is supported.

OS Windows 98 Second Edition SP1

Windows Me

Windows NT4.0 SP6

Windows 2000 Professional SP4

The following 32-bit operating systems:

Windows XP Home Edition SP2 or later

Windows XP Professional SP2 or later

Windows Vista

(All editions except Starter Edition)

Windows Vista SP1

(All editions except Starter Edition)

•Internet Explorer Ver. 5.0 or later must be installed.

CPU Pentium MMX 166 MHz or higher (Pentium II 233 MHz or

higher recommended)

Memory capacity 64 MB or more (128 MB or more recommended)

Free hard disk space 50 MB or more

Display SVGA (800 ^600) or higher resolution, 32 bit or higher

display colour

•Macintosh computers cannot be used.

•Operations carried out at the computer may become slow depending

on the number of projectors being managed. If this happens, use a

computer with higher specifications.

•EMP Monitor cannot be used in environments which do not allow

pings to be transmitted.

•Windows NT4.0 does not support Arabic and Hebrew versions of

EMP Monitor.

•You must update Windows Vista to Windows Vista SP1 to use the

Ukrainian version of EMP Monitor.

Installing EMP Monitor

When you are using Windows 2000/Windows NT4.0/Windows XP/

Windows Vista, you must have administrator authority in order to

install EMP Monitor.

When the language selected for the EMP Monitor installation varies

from that of the OS being used, the EMP Monitor screens may not be

displayed correctly.

Procedure

Turn the computer on.

To prevent problems from occurring during the installation, we

recommend that you terminate all resident applications that can

be ended.

Load the following CD-ROM in your computer: “EPSON

Projector Software for Meeting & Monitoring” or “EPSON

Projector Software for Monitoring”.

The installer automatically starts up.

From here, continue with the installation by following the

on-screen messages.

Limitations imposed by a Windows Vista

environment

When using EMP Monitor under Windows Vista, note the following

limitations.

•You must have administrator authority in order to use Register at

startup on the Environment setup screen of EMP Monitor.

s"Monitoring using the system tray" p.23

Operating environment

•Even after EMP Monitor has been uninstalled, the settings and log

information will remain on the hard disk. If this information is no

longer required, you may delete the EMP Monitor V4.30 folder.

Provided the default settings were used at installation, this folder can

be found at:"C:\Users\(User Name)\AppData\Local\VirtualStore\Program

Files\EPSON Projector\EMP Monitor V4.30"

Before starting operations

Check the following points before starting up EMP Monitor.

•EMP Monitor must be installed on the computer to be used for

monitoring and control.

•The computer and the projectors must be connected to the network.

•If using Windows 2000/Windows NT4.0/Windows XP/Windows Vista,

the computer must be started up in Administrator mode.

•Depending on the projector model, a commercially-available serial W

TCP/IP conversion adapter and a connection cable are required in

order to use EMP Monitor. sProjector's User's Guide "Standby Mode"

Make the settings for the serial WTCP/IP conversion adapter before

connecting to the projector.

Operating environment

Using EMP Monitor

This operation is carried out when starting EMP Monitor for the first

time after it has been installed and when you would like to add

projectors. Once a projector has been registered, the status for the

projector will be displayed automatically each time EMP Monitor is

started from that point onwards.

Starting EMP Monitor

Procedure

Click Start - Programs (or All Programs) - EPSON Projector -

EMP Monitor V4.30 in that order to start EMP Monitor.

The main window will be displayed.

The area described in red box is referred to as Grouping view.

The operations to register projectors using the automatic search will

vary depending on where the projectors are connected to in the network.

•When registering a projector that is located in the same segment as

the computer in witch EMP Monitor is installed. s"Registering

projectors using automatic search (Searching for and registering

projectors that are located in the same segment)" p.10

•When registering projectors that are in multiple segments of the

network. s"Setting the range of addresses to do an automatic

search and registration" p.12

Registering and deleting projectors for monitoring

Registering projectors using automatic search

(Searching for and registering projectors that

are located in the same segment)

Procedures for automatic search

Procedure

Right-click in Grouping view and select "New" - "Projector

(automatic search)".

The Create new projector (automatic registration) window will be

displayed.

If Detail list view is displayed, select New - Projector (automatic

search) from the Edit menu.

Click "Search".

Automatic searching will be carried out, and the names of the

projectors that have been detected will be displayed.

If a projector does not appear in the list, use "Registration by

specifying an IP address (Manual registration)". sp.14

•You can also carry out this operation by selecting New -

Projector (automatic search) from the Edit menu.

•Projectors that are using a serial WTCP/IP conversion adapter

cannot be detected.

Registering and deleting projectors for monitoring

Andere Handbücher für EMP Monitor

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Epson Software Handbücher

Epson

Epson Panorama Stitcher Light EP and QuickTime 5 Bedienungsanleitung

Epson

Epson 3800 - Stylus Pro Color Inkjet Printer Bedienungsanleitung

Epson

Epson Scanner A3 Bedienungsanleitung

Epson

Epson EasyMP Network Projection Bedienungsanleitung

Epson

Epson Zip-100S (SCSI Bedienungsanleitung

Epson

Epson Software Film Factory v3.0 Bedienungsanleitung

Epson

Epson ES-300C Bedienungsanleitung

Epson

Epson Stylus Pro 9880 ColorBurst Edition - Stylus Pro 9880... Bedienungsanleitung

Epson

Epson Stylus RIP Bedienungsanleitung

Epson

Epson 875DC - Stylus Photo Color Inkjet Printer Bedienungsanleitung

Epson

Epson 826W - PowerLite WXGA LCD Projector Bedienungsanleitung

Epson

Epson 4000 - Stylus Pro Color Inkjet Printer Abmessungen

Epson

Epson PowerLite 1835 Bedienungsanleitung

Epson

Epson Progression NX Abmessungen

Epson

Epson FX-1180 - Impact Printer Bedienungsanleitung

Epson

Epson Stylus Scan 2000 Bedienungsanleitung

Epson

Epson PowerLite 4650 Bedienungsanleitung

Epson

Epson 836XL - Expression - Flatbed Scanner Bedienungsanleitung

Epson

Epson 1640XL - Expression Graphic Arts Abmessungen

Epson

Epson M00002112 Handbuch

Epson

Epson PowerLite Pro G6050W Bedienungsanleitung

Epson

Epson Stylus Color 900 Bedienungsanleitung

Epson

Epson ES-300C Bedienungsanleitung

Epson

Epson 4012033-00 XXX Bedienungsanleitung

Beliebte Software Handbücher anderer Marken

COMPRO

COMPRO COMPROFM Bedienungsanleitung

Muratec

Muratec OFFICEBRIDGE ONLINE Bedienungsanleitung

Oracle

Oracle Contact Center Anywhere 8.1 Bedienungsanleitung

Adobe

Adobe 65007312 - Photoshop Lightroom Handbuch

Avaya

Avaya NULL One-X for RIM Blackberry Bedienungsanleitung

HP ProLiant BL420c Bedienungsanleitung

PS Audio

PS Audio PowerPlay Betriebsanleitung

Brady

Brady LOCKOUT PRO 3.0 Service-Handbuch

Avaya

Avaya Interaction Center Bedienungsanleitung

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Handbuch

Novell

Novell GROUPWISE 8 - INTERNET AGENT Bedienungsanleitung

Oracle

Oracle Application 9i Bedienungsanleitung

Acer

Acer RDM Bedienungsanleitung

Canon

Canon Vixia HF21 Bedienungsanleitung

Canon

Canon ZR950 Bedienungsanleitung

Samsung

Samsung Auto Backup Bedienungsanleitung

Polycom

Polycom Vortex EF2201 Montage- und Bedienungsanleitung

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c Bedienungsanleitung