ErGear EGDS7 Bedienungsanleitung

Monitor Desk Mount

Instruction Manual V1.0

Model: EGDS7

Thank you for choosing this Ergear product! At Ergear we strive to

provide you with the best quality products and services in the

industry. Should you have any issues, please don't hesitate to

contact at [email protected] (US/CA/DE/UK/FR/IT/ES/AU)

Check the VESA Pattern of Your Monitor beforeYouBegin the Installation

Please carefully read all instructions before attempting installation. If you do not

understand the instructions or have any concerns or questions, please contact our

customer service at [email protected].

CAUTION: Avoid potential personal injuries and property damage!

• Do not use this product for any purpose that is not explicitly speciﬁed in this manual.

Do not exceed weight capacity. We are not liable for damage or injury caused by

improper mounting, incorrect assembly or inappropriate use.

• This product contains a high pressure gas spring, ﬁre and percussion prohibited. Also

it is strictly prohibited to dismantle without professionals. Please return to the

manufacturer or hand over to professional agencies if the product is abandoned.

• The desk must be capable of supporting three times the weight of the total load (the

mount, the monitor and all accessories weight). Don't use the product on particle board.

IMPORTANT SAFETY INFORMATION

If this desk mount is NOT compatible, please contact customer service

at [email protected] to ﬁnd a compatible product.

If your monitor VESA is greater than 100x100 mm/4x4 in. or less than

VESA 75x75mm/3x3in., this mount is NOT compatible.

Weight Restrictions

DO NOT exceed the maximum weight indicated.

This mounting system is intended for use only with

the maximum weights indicated. Use with products

heavier than the maximum weights indicated may

result in failure of the mount and its accessories,

causing possible damage and or injury.

WARNING

75 mm ≈ 3 in.

100 mm ≈ 4 in.

Minimum VESA pattern:

75mm/3 in.(W)x75mm/3 in.(H)

MAX:100

mm/4 in.

MAX:100

mm/4 in.

MAX:100

mm/4 in.

4.4-14.3 lbs.

(2.0-6.5 kg)

If your TV weighs more, this

mount is NOT compatible.

0101

Product Features

0~90mm

(0~3.54 in.)

(9.8 in.)

0~90mm

(0~3.54 in.)

Warning!

Do not adjust tension without monitor.

1. Ensuremonitorhas been attached to the mount.

2. Read your monitor box or manual to ﬁnd out monitor net weight.

3. Ensurethe net weight of monitor (including accessories) is between

4.4~14.3 Ibs (2.0-6.5 kg).

Clockwise to reduce

tension(carry less weight)

Counter-clockwise to increase

tension(carry more weight)

TENSION ADJUSTMENT SHOULD BE DONE ONLY

AFTER MOUNT INSTALLATION

Adjustment Sign

Bolt (A)

M4x12mm (X8)

C-Clamp x2 C-Clamp Brace x2

Bolt (B-1)

M4x16mm (X8)

Spacer (B-2)

5mm (X8)

Bolt (C)

M6x12mm (X6) Grommet Plate

Long Bolt Butterﬂy Nut 5/32 in.(4mm)

Allen Key

A. USB Cables Installation Method (USB Cables are Not Included)

Arm x1

13/64 in.(5mm)

Allen Key

Bottom Plate

① ②

③ ④

②

Warning:

Ensure bolts are

Warning:

Ensure bolts are

10~90mm

0.39~3.54 in.

③

B1-2

B1-1

5/32 in.

(4mm)

①

B2-1

B2-2

Warning:

Ensure bolts are

Warning:

Ensure bolts are

5/32 in.

(4mm)

0.39~1.96 in.

Warning:

Ensure bolts are

secured ﬁrmly.

For VESA hole pattern:

3in. (75mm) x 3 in. (75mm)

4 in. (100mm) x 4 in. (100mm)

C-1 Choose Proper bolts C-2 Install Monitors to the Arms

10.1-0.2in.(3-5mm) spacing left

The tension is preset at

8.8~11 Ibs(4-5kg). After

hanging the monitor to

the mount, please

release the

monitor slowly to

prevent it from falling

suddenly.

100x100mm

75x75mm

Screwdriver

[Not Included]

Flat back monitor

Round back monitor

100x100mm

75x75mm

B-1

B-2

D. Adjust Gas Spring Tension

Be sure to keep the arm in

horizontal position during

adjustment. Or else, it would be

diﬃcult to adjust the mount or

damage the mount.

1. If the monitor can stay at the desired height by

itself, no adjustment needed.

2. If the monitor rises up, press the arm to keep it

in horizontal position and then use the 13/64

in.(5mm) Alley key (G) to turn the bolt

clockwise(“-” direction) to reduce tension of the

arm only until the monitor can stay at the desired

height by itself.

3. If the monitor falls down, lift the arm to keep it in

horizontal position and then use the 13/64 in.(5mm)

Alley key (G) to turn the bolt counter-clockwise

(“+” direction) to increase tension of the arm only

until the monitor can stay at the desired height by

itself.

C. Attach Monitor to the Arm

E. Directional Usage Guide

(1 rotation ≈1 lb)

13/64 in.

(5mm)

13/64 in.

(5mm)

F. Adjust Tilt Angle

Inhaltsverzeichnis

Andere ErGear Rack & Stand Handbücher

ErGear

ErGear EGSS3 Bedienungsanleitung

ErGear

ErGear EGSS9 Bedienungsanleitung

ErGear

ErGear EGCM5 Bedienungsanleitung

ErGear

ErGear EGCM7 Bedienungsanleitung

ErGear

ErGear EGDS3 Bedienungsanleitung

ErGear

ErGear EGESD1 Bedienungsanleitung

ErGear

ErGear EGDS6 Bedienungsanleitung

ErGear

ErGear EGSS7 Bedienungsanleitung

ErGear

ErGear EGDS2 Bedienungsanleitung

ErGear

ErGear EGCM1 Bedienungsanleitung

ErGear

ErGear EGSS1 Bedienungsanleitung

ErGear

ErGear EGCM12 Bedienungsanleitung

ErGear

ErGear EGDS15B Bedienungsanleitung

ErGear

ErGear EGTS5B Bedienungsanleitung

ErGear

ErGear EGCM12 Bedienungsanleitung

ErGear

ErGear EGCM6 Bedienungsanleitung

ErGear

ErGear EGDS9 Bedienungsanleitung

ErGear

ErGear EGSS2 Bedienungsanleitung

Beliebte Rack & Stand Handbücher anderer Marken

Salamander

Salamander Acadia AC/W/L400/WH Bedienungsanleitung

Fohhn

Fohhn VAT-09 Benutzerhandbuch

ricoo

ricoo FS0522 Bedienungsanleitung

AMSOIL

AMSOIL BMK-22 Kurzanleitung

Kargo Master

Kargo Master 48220 Bedienungsanleitung

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung

ricoo

ricoo S1222 Bedienungsanleitung

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Bedienungsanleitung

VidaBox

VidaBox VB MNT FFS2 Bedienungsanleitung

Welch Allyn

Welch Allyn 48960 Bedienungsanleitung

Arkon

Arkon CM035-ST-2 Bedienungsanleitung

PROEL

PROEL PLWIN60C Bedienungsanleitung

Agilent Technologies

Agilent Technologies E2609B Bedienungsanleitung

Mustang

Mustang MV-ARM4 Bedienungsanleitung

Mounting Solutions

Mounting Solutions WRM-320 Bedienungsanleitung

Pyle

Pyle PMKSPAD1 Bedienungsanleitung

ShelterIt

ShelterIt 21208 Bedienungsanleitung

SPL

SPL RackPack?4 1040 Bedienungsanleitung