Ergotron Neo-Flex Slide-out Bedienungsanleitung

888-61-101-G-00 rev.A • 05/14

1 of 9

User's Guide - English

Guía del usuario - Español

Manuel de l’utilisateur - Français

Gebruikersgids - Deutsch

Benutzerhandbuch - Nederlands

Guida per l’utente - Italiano

Användarhandbok - svenska

ユーザーガイド:日本語

用户指南 : 汉语

Neo-Flex Slide-out Keyboard Tray

Wall Mount

For the latest User Installation Guide please visit: www.ergotron.com

User's Guide

888-61-101-G-00 rev.A • 05/14

2 of 9

1Determine Ergonomic Mounting Height

Learn more about ergonomic computer use at:

www.computingcomfort.org

Height Position top of screen slightly below eye level.

Position keyboard at about elbow height with wrists at.

Distance Position screen an arm's length from face—at least 20” (508mm).

Position keyboard close enough to create a 90˚ angle in elbow.

Angle Tilt screen to eliminate glare.

Tilt the keyboard back 10° so that your wrists remain at.

To Reduce Fatigue

Breathe - Breathe deeply through your nose.

Blink - Blink often to avoid dry eyes.

Break • 2 to 3 minutes every 20 minutes

• 15 to 20 minutes every 2 hours.

Set Your Workstation to Work For YOU!

ABCD E

8-32 x 1/2"

1/8"

1/4-20 x 1/2"

set screw

3/32"

1/2"

1/4-20 x 2"

M6 x 70mm

ST6.3 x 50 mm

See Wall Mounting Options for additional tools needed for your type of wall installation.

888-61-101-G-00 rev.A • 05/14

3 of 9

2Wall Mounting Options

WARNING:

Ensure that the wall structure is capable of supporting four times the total

weight of mounted equipment. Mounting to wall surfaces that do not meet this

criteria may result in an unstable, unsafe condition which could lead to personal

injury and/or property damage. Consult a construction professional if you have

any doubt about what this means in regard to your particular application.

10mm

Requires minimum material thickness of 5/8” (16 mm).

Wood

Hollow Wall

Concrete

Studs ≥ 25 gauge steel

Ø 3/16" (5 mm)

Ø 3/8" (10 mm)

Stud Finder

M6 x 70mm

1/4-20 x 2"

ST6.3 x 50 mm

Ø 1/2" (13 mm)

8“

(203mm)

1“

(25mm)

1“

(25mm)

2“

(51mm) 0.5“

(13mm)

≥ 5/8”

Sheetrock

888-61-101-G-00 rev.A • 05/14

4 of 9

Wood

3Attach to Wall

Studs ≥ 25 gauge steel

Wood

Studs ≥ 25 gauge steel

Stud Finder

Ø 3/16" (5 mm)

ST6.3 x 50 mm

NOTE: Fasteners may unwind due to vibration caused by movement of mounting solution over

time. Inspect mounting solution for loose fasteners on a routine basis. If desired, apply a light

duty thread locking adhesive to fasteners before installation to prevent back-out.

888-61-101-G-00 rev.A • 05/14

5 of 9

Hollow Wall

3Attach to Wall

1. Push anchor plate into hole.

2. Pull loop back so plate opens at against inside surface of wall.

3. Push collar into hole.

4. Snap o loop.

1234

Ø 1/2" (13 mm)

1/4-20 x 2"

NOTE: Fasteners may unwind due to vibration caused by movement of mounting solution over

time. Inspect mounting solution for loose fasteners on a routine basis. If desired, apply a light

duty thread locking adhesive to fasteners before installation to prevent back-out.

≥ 5/8”

Sheetrock

888-61-101-G-00 rev.A • 05/14

6 of 9

Concrete

3Attach to Wall

3-1/8"

(80 mm)

NOTE: Fasteners may unwind due to vibration caused by movement of mounting solution over

time. Inspect mounting solution for loose fasteners on a routine basis. If desired, apply a light

duty thread locking adhesive to fasteners before installation to prevent back-out. 47

123

10mm

Ø 3/8" (10 mm)

M6 x 70mm

WARNING:

Mounting holes must be at least 3-1/8”(80mm) deep and must be located within solid con-

crete, not mortar or covering material. If you drill into an area of concrete that is not solid,

reposition mounting holes until both anchors can be fully inserted into solid concrete!

WARNING:

Anchors that are not fully set in solid concrete will not

support the applied load resulting in an unstable, unsafe

condition which could lead to personal injury and/or prop-

erty damage. Consult a construction professional if you

have any doubt about what this means in regard to your

particular situation.

CAUTION: Make sure the wall

mount bracket is level, ush and

snug to the wall surface. DO NOT

OVERTIGHTEN THE BOLTS.

888-61-101-G-00 rev.A • 05/14

7 of 9

4Attach Keyboard Tray

5Attach Keyboard

8-32 x 1/2"

1/8"

3/32"

NOTE: Fasteners may unwind due to vibration caused

by movement of mounting solution over time. Inspect

mounting solution for loose fasteners on a routine basis.

If desired, apply a light duty thread locking adhesive to

fasteners before installation to prevent back-out.

cdba

1/4-20 x 1/2"

set screw

888-61-101-G-00 rev.A • 05/14

8 of 9

90˚

Range of Motion

This product is designed to adjust quickly and easily according to your needs – refer to following

steps for adjustment.

Tilt – Forward and Backward

Negative Tilt

Pan – Side-to-Side

1/2"

Increase Friction

If this product moves too easily from

side-to-side, then you'll need to

increase friction:

Decrease Friction

If this product is too dicult to move

from side-to-side, then you'll need to

decrease friction:

Increase Friction

If this product moves too easily from

side-to-side, then you'll need to

increase friction:

Decrease Friction

If this product is too dicult to move

from side-to-side, then you'll need to

decrease friction:

888-61-101-G-00 rev.A • 05/14

9 of 9

8Attach Cable Management

c da

7Attach Mouse Pouch

For local customer care phone numbers visit: http://contact.ergotron.com

Inhaltsverzeichnis

Andere Ergotron Rack & Stand Handbücher

Ergotron

Ergotron WorkFit LX Bedienungsanleitung

Ergotron

Ergotron 870-03-005 Bedienungsanleitung

Ergotron

Ergotron DS100 Series Bedienungsanleitung

Ergotron

Ergotron StyleView Sit Stand Combo System Bedienungsanleitung

Ergotron

Ergotron SV Combo Bedienungsanleitung

Ergotron

Ergotron DS100 Series Bedienungsanleitung

Ergotron

Ergotron Neo-Flex OM10245 Bedienungsanleitung

Ergotron

Ergotron LX Sit-Stand Collar Kit Bedienungsanleitung

Ergotron

Ergotron LX Dual Side-by-Side Arm Bedienungsanleitung

Ergotron

Ergotron StyleView Sit Stand Combo Arm Bedienungsanleitung

Ergotron

Ergotron 100 Series Bedienungsanleitung

Ergotron

Ergotron WorkFit-A Bedienungsanleitung

Ergotron

Ergotron WorkFit Elevate 24-804-S894 Bedienungsanleitung

Ergotron

Ergotron Grommet Mount Kit Bedienungsanleitung

Ergotron

Ergotron LX3 Bedienungsanleitung

Ergotron

Ergotron LX Series Bedienungsanleitung

Ergotron

Ergotron Neo-Flex 33-334-085 Abmessungen

Ergotron

Ergotron LX Desk Mount LCD Arm Bedienungsanleitung

Ergotron

Ergotron 97-585 Bedienungsanleitung

Ergotron

Ergotron Neo-Flex Bedienungsanleitung

Ergotron

Ergotron LX Sit-Stand Wall Keyboard Arm Bedienungsanleitung

Ergotron

Ergotron LX Desk Mount LCD Arm Bedienungsanleitung

Ergotron

Ergotron 888-33-332 Bedienungsanleitung

Ergotron

Ergotron VESA Bedienungsanleitung

Beliebte Rack & Stand Handbücher anderer Marken

Salamander

Salamander Acadia AC/W/L400/WH Bedienungsanleitung

Fohhn

Fohhn VAT-09 Benutzerhandbuch

ricoo

ricoo FS0522 Bedienungsanleitung

AMSOIL

AMSOIL BMK-22 Kurzanleitung

Kargo Master

Kargo Master 48220 Bedienungsanleitung

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung

ricoo

ricoo S1222 Bedienungsanleitung

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Bedienungsanleitung

VidaBox

VidaBox VB MNT FFS2 Bedienungsanleitung

Welch Allyn

Welch Allyn 48960 Bedienungsanleitung

Arkon

Arkon CM035-ST-2 Bedienungsanleitung

PROEL

PROEL PLWIN60C Bedienungsanleitung

Agilent Technologies

Agilent Technologies E2609B Bedienungsanleitung

Mustang

Mustang MV-ARM4 Bedienungsanleitung

Mounting Solutions

Mounting Solutions WRM-320 Bedienungsanleitung

ShelterIt

ShelterIt 21208 Bedienungsanleitung

Pyle

Pyle PMKSPAD1 Bedienungsanleitung

SPL

SPL RackPack?4 1040 Bedienungsanleitung