7. WiFi models only:
Download the app from the pp Store or Google Play Store: Smart-E thermostat
Select AP mode by pressing the power button for 5 seconds. The icon will appear on the screen.
Register an account and wait for an email from scinan service cent. This may take 4 hours. Click on
the link to verify your email address. Open the App on your phone and log-in.
Click on the + symbol top right. Click on 'Find device' and select the thermostat from the list. Enter the
network and password information in the configuration and click 'CONFIG'
To rename the thermostat (bedroom, living room, etc) press and hold on the name for 3 seconds.
There is no limit to the number of thermostats you can connect to the app.
Switch to remote mode by pressing the power button for 5 seconds. The symbol will appear on the
screen. The thermostat can be used in either AP or remote mode, it cannot support both at the same
time.
TROUBLESHOOTING:
isplay Error condition Result Action
Err.1 Internal sensor short
circuit Shuts down all heating output. Sensor is damaged –
replace thermostat
Err.2 Internal sensor open
circuit Shuts down all heating output
Check configuration
setting (item 6) is set
to
Err.3 External sensor short
circuit Shuts down all heating output Sensor is damaged –
replace sensor
Err.4 External sensor open
circuit Shuts down all heating output. Check configuration
setting is set to
User error and deliberate or accidental damage are not covered by 12 month manufacturers' warranty.
Supplied by ERHS Ltd, 70 Woolmer Way, Bordon, GU35 9QF
DC-2 thermostat – User instructions
Floor heating thermostat compatible with 10K or 100K floor sensor /
Room thermostat with built-in air sensor
16 Amp Digital programmable thermostat compatible with
Eswa floor an ceiling heating
FEATURES
3.1 inch large screen display
Permanent user setting retention during power loss
Programming Periods: 7 individual day programming with 6 periods per day
Remote control by mobile phone (WiFi version only)
TECHNICAL SPECIFICATION:
Power source ……………………… 100-240VAC 50/60Hz
Maximum load electric current…………………………16A/250VAC
Room temperature setting range……5℃ to35℃
Floor temperature setting range…… 5℃ to 70℃
Accuracy……………………………… 0.1℃
Working environment temperature………………………………0℃ to 50℃
The storage temperature: ………………………………-10℃ to 60℃
imensions…………………………….86mm X 86mm X13mm
IMPORTANT SAFETY INFORMATION:
Read all of the information in this manual before installing this thermostat.
Always turn off power at the main power source by removing the fuse or switching
circuit breaker to the off position before installing, removing, cleaning, or servicing this
thermostat.
All wiring must conform to wiring regulation BSEN 7671.
Use this thermostat only as described in this manual.
-4-
