Ericsson M-PA EDACS Bedienungsanleitung

Operator’s Manual

Mobile Communications

LBI-38979

EDACSM-PA

PORTABLE RADIOS

TABLE OF CONTENTS

INTRODUCTION. . . . . . . . . . . . . . . . . 3

CONTROLS. . . . . . . . . . . . . . . . . . . . . 5

INDICATORS. . . . . . . . . . . . . . . . . . . . 15

UNIVERSAL DEVICE CONNECTOR. 17

ALERT TONES . . . . . . . . . . . . . . . . . . 18

OPERATION . . . . . . . . . . . . . . . . . . . . 19

POWER-UP . . . . . . . . . . . . . . . . . . . 19

SYSTEM/GROUP/CHANNEL

SELECTION. . . . . . . . . . . . . . . . . . . 19

TRUNKED MODE OPERATION . . . 22

Receiving A Message . . . . . . . . . . . 22

Sending A Message. . . . . . . . . . . . . 24

Emergency Operation . . . . . . . . . . . 25

Dynamic Regrouping . . . . . . . . . . . . 26

Wide Area System Scanning. . . . . . 27

Scanning Trunked Groups. . . . . . . . 27

Special Calls. . . . . . . . . . . . . . . . . . . 29

CONVENTIONAL MODE

OPERATION . . . . . . . . . . . . . . . . . . . . 36

Receiving A Message . . . . . . . . . . . 36

Sending A Message. . . . . . . . . . . . . 37

Emergency Operation . . . . . . . . . . . 38

Scanning Conventional Channels . . 39

Telephone Interconnect Calls . . . . . 42

OPERATING TIPS. . . . . . . . . . . . . . . . 42

TABLE OF CONTENTS

(Continued)

OPERATING RULES AND

REGULATIONS . . . . . . . . . . . . . . . . . 43

HANDLING OF BATTERY AND

ACCESSORIES. . . . . . . . . . . . . . . . . 43

REPLACING THE BATTERY

PACK. . . . . . . . . . . . . . . . . . . . . . . . 43

CHARGING THE BATTERY

PACKS. . . . . . . . . . . . . . . . . . . . . . . 44

RECHARGEABLE BATTERY

PACK DISPOSAL . . . . . . . . . . . . . . 45

USING VEHICULAR CHARGER

IN MOBILE CONFIGURATION. . . . 47

CARRYING THE RADIO IN BELT

LOOP OR BELT CLIP. . . . . . . . . . . 49

CARRYING THE RADIO IN

LEATHER CASE OR PLASTIC

HOLDER . . . . . . . . . . . . . . . . . . . . . 50

REMOVING AND REPLACING

THE SWIVEL MOUNT . . . . . . . . . . 50

CONNECTING AUDIO

ACCESSORIES. . . . . . . . . . . . . . . . 51

CHARGERS . . . . . . . . . . . . . . . . . . 51

AUDIO ACCESSORIES . . . . . . . . . 54

CARRYING ACCESSORIES . . . . . 56

INTRODUCTION

The EDACS

M-PA

Select,

Scan and System model radios are

high-quality microprocessor-control-

led synthesized two-way FM portable

radios. These full-featured radios are

designed for operation in EDACS

(Enhanced Digital AccessCommuni-

cations System) trunking systems

and conventional radio systems.

M-PA operation is highlighted by the

radio’s programming versatility. This

permits custom operation of each ra-

dio to meet the needs of the radio

system and the individual users.

This manual describes operating

procedures for the three (3) different

radio models.

The M-PA Select model radio is

thebasic version ofthe radio that can

be programmed with up to sixteen

(16) independent trunked groups

and/or conventional radio channels.

Thisunitfeaturesaneight-digitalpha-

numeric liquid crystal display (LCD)

and a 16-position knob for group/

channel selection. The display also

has status flags that indicate various

operating modes and it is backlit for

nighttime and low-level ambient light

operation.

Scan and System model radios

have an LCD similar to the Select

model radio. These radios have front

panel keypads thatprovide additional

operating features not available on

the Select model radio. The Scan

model radio has a 4-button keypad

and the System model radio has a

16-buttonkeypad.Additionalfeatures

Figure 2 - Select Model

Figure 1 - Side View (All Models)

include expanded system and

group/channel selection capability,

trunked group and conventional

channel scan capability, trunked

mode individual call capability, and

telephoneinterconnectcallcapability.

The numeric keypad on the System

modelradioalso allowsstorageoften

(10) operator-entered telephone

numbers and ten (10) operator-en-

tered radio ID numbers. These num-

bers can be recalled at will and

initiated. Manually dialed telephone

interconnect with overdial capability

andconventionalmodeDTMFdialing

is also provided by the System

model’s 16-button keypad.

The exact operation of a particu-

lar radio will vary depending upon its

mode of operation, its programming,

and the particular radio system. Con-

sult a radio system’s representative

for particular features that are pro-

grammed into the radio.

The radio operates in trunked

mode when a trunked system is se-

lected andit operates in conventional

mode when a conventional system is

selected.

CONTROLS

ON/OFF SWITCH

The ON/OFF SWITCH is located

on the battery pack. Sliding this

switch up will supply power to the

radio from the battery pack. An audi-

ble click will be heard and the "ON"

indicator will be exposed. When the

radio is turned on, it will perform a

power-up self test and resume oper-

Figure 3 - Scan Model Figure 4 - System Model

ating on the previous group or chan-

nel. Sliding the switch down will turn

the radio off.

VOLUME CONTROL KNOB

The VOLUME CONTROL KNOB

is a rotatable control on the top of the

radio used to adjust the receiver’s

volume level in the speaker. Rotating

this knob in a clockwise direction will

increase the volume and counter-

clockwise rotation will decrease the

volume. Minimum volume levels can

be programmed into the radio to pre-

vent missed calls when the knob is

rotated fully counter-clockwise.

CONTROL KNOB

The rotatable 16-position CON-

TROLKNOB located onthetop of the

radioprovidessystem,grouporchan-

nel selection according to how the

radio is programmed. A stop plate

may be installed under the knob to

limit the maximum number of posi-

tions to less than sixteen (16). It is

normally factory installed for fifteen

(15) positions.

On the Select model radio, the

CONTROL KNOB selects any one of

trunked systems and groups or con-

ventional channels programmed into

the radio.

On Scan and System model ra-

dios,the CONTROL KNOBis used in

combinationwiththekeypadtoselect

a specific trunked system and group

or a conventional channel. Theselec-

tion method is determined by the ra-

dio’s programming. See the section

entitled "SYSTEM/GROUP/CHAN-

NEL SELECTION" in the "OPERA-

TION" section of this manual for

details.

PTT BUTTON

Pressing the PTT BUTTON on

the side of the radio turns on the

radio’s transmitter. The "TX" status

flaginthedisplaywillturnonwhenthe

radio is transmitting. Releasing the

PTT BUTTON will return operation to

receive mode.

Whenoperatingonatrunkedsys-

tem,theradiomaybe programmed to

automatically transmit (without the

operator pressing the PTT BUTTON)

to maintain communication with the

sitecontroller. The"TX" status flag in

thedisplaywillturn on whentheradio

is transmitting.

MONITOR BUTTON

Trunked Mode

Whenoperatingonatrunkedsys-

tem in specialcall mode,pressing the

MONITOR BUTTON after an individ-

ual call has been received will return

the radio to the group call mode. In

this condition, the radio will not re-

spondon an individual basis but it will

then transmit group calls upon sub-

sequent activations of the PTT BUT-

TON.Theradiowillalsoautomatically

return tothegroup callmode afterthe

programmed individual call-back

time-out period expires.

This button is also used to toggle

between group and regroup settings

if the Dynamic Regrouping mode

(with deselect capability) has been

activated by the site controller.

On the System model radio,

pressing the MONITOR BUTTON will

clear all digits entered from the nu-

meric keypad and return the radio to

the selected group display.

Conventional Mode

When the radio is operating in

conventional mode (on a conven-

tional channel), the MONITOR BUT-

TONisusedtotemporarilyunsquelch

the receiver so channel traffic can be

monitored. Momentarily pressing it

will unsquelch the receiver.

IftheselectedchannelhasChan-

nel Guard (CG) and/or Type 99 (T99)

coded-squelch tone decode feature

programmed for the selected chan-

nel, this button can also be used to

enable and disable the programmed

feature.Repeatedactivationswilltog-

gle CG and/or T99 between the en-

abled (on) and disabled (off) states.

To toggle the programmed feature,

press and hold the MONITOR BUT-

TON until the appropriate status flag

toggles (at least two (2) seconds).

The MONITOR BUTTON is also

usedtoresettheradioafteraType99

(T99) selective call has been suc-

cessfully received. If the radio is op-

erating in a Type 99 mode,

momentarily press the MONITOR

BUTTONtoresettheradioafteraT99

call is successfully received.

EMERGENCY BUTTON

When the radio is operating in

trunked mode, pressing and holding

the red EMERGENCY BUTTON on

topof the radio forapproximately one

(1) second will initiate an emergency

call on the programmed home group.

If no home group is programmed into

the radio the emergency call will be

transmitted on the selected group.

In conventional mode, initiating

an emergency call by pressing the

EMERGENCY BUTTON will cause

the radio to transmit GE-STARemer-

gency signalling on the programmed

emergency channel. If no emergency

channel is programmed, GE-STAR

emergencysignallingwillbetransmit-

ted on the selected channel.

STEP BUTTON

(Scan And System Models Only)

The STEP button located on the

keypad can be programmed to select

trunked groups and conventional

channels

it can be programmed to

select systems. See the section enti-

tled "SYSTEM/GROUP/CHANNEL

SELECTION" for details.

STEP is also used to scroll

through the programmed special call

table when the special call mode is

enabled.

Andere Handbücher für M-PA EDACS

Inhaltsverzeichnis

Andere Ericsson Tragbares Radio Handbücher

Ericsson

Ericsson M-PA LBI-38378D Bedienungsanleitung

Ericsson

Ericsson LBI-38823C Bedienungsanleitung

Ericsson

Ericsson Monogram Series MGP 450 Bedienungsanleitung

Ericsson

Ericsson LBI-38836A Bedienungsanleitung

Ericsson

Ericsson KPC-300 Bedienungsanleitung

Ericsson

Ericsson PCS Bedienungsanleitung

Ericsson

Ericsson AEGIS EDACS M-PA Bedienungsanleitung

Ericsson

Ericsson GE-MARC VE MDR Bedienungsanleitung

Ericsson

Ericsson M-PA EDACS Bedienungsanleitung

Ericsson

Ericsson KRD 103 117/1 Bedienungsanleitung

Ericsson

Ericsson EDACS IPE SERIES Bedienungsanleitung

Ericsson

Ericsson EDACS PRISM HP/LPE-200 Bedienungsanleitung

Ericsson

Ericsson AEGIS EDACS M-PA LBI-38795A Bedienungsanleitung

Ericsson

Ericsson M-PA Bedienungsanleitung

Ericsson

Ericsson EDACS M-RK-II Bedienungsanleitung

Ericsson

Ericsson LBI-39110 Bedienungsanleitung

Ericsson

Ericsson EDACS DPE-100 Bedienungsanleitung

Ericsson

Ericsson RRUS 13 Bedienungsanleitung

Ericsson

Ericsson KPC-300 Bedienungsanleitung

Ericsson

Ericsson NPC-50 Bedienungsanleitung

Ericsson

Ericsson MPI-II LBI-38558B Bedienungsanleitung

Ericsson

Ericsson Monogram Series Bedienungsanleitung

Ericsson

Ericsson PCS Bedienungsanleitung

Ericsson

Ericsson LZT-1872R1A Bedienungsanleitung

Beliebte Tragbares Radio Handbücher anderer Marken

Telefunken

Telefunken P5 Bedienungsanleitung

Tait

Tait TP9300 Bedienungsanleitung

Lafayette

Lafayette Guardian 5500 Bedienungsanleitung

Sailor

Sailor SP3300 Bedienungsanleitung

Matra Nortel

Matra Nortel MC 6500 Bedienungsanleitung

Hytera

Hytera PD362i Bedienungsanleitung

Vertex Standard

Vertex Standard VX-P920 Series Bedienungsanleitung

Roberts

Roberts Ecologic 3 Bedienungsanleitung

LENCO

LENCO IPD-5100 Bedienungsanleitung

Baofeng

Baofeng BF-82 Bedienungsanleitung

Trevi

Trevi RA 764 Bedienungsanleitung

M/A-Com

M/A-Com P5100 Series Bedienungsanleitung

Elta

Elta 6699 Bedienungsanleitung

PURE

PURE ONE classic Series II Bedienungsanleitung

Teac

Teac PR130 Bedienungsanleitung

Philips

Philips AE6370 Bedienungsanleitung

Simoco

Simoco SRP9170 Bedienungsanleitung

Audiovox

Audiovox FR14 Bedienungsanleitung