ESAB A6S Compact 300 Bedienungsanleitung

Valid for serial no. 440-xxx-xxxx0449 458 001 10-03-11

A6S Compact 300

Instruction manual

  

Rights reserved to alter specifications without notice.

ENGLISH 4..............................................

       

           

        

     

  

 

 !     ! " !"#   $# %

&'(

!#$  %& )*" +

'& # * , -# &$# "  . / 0

'& # * , #  " $ / (1 2 // (1 23

  %  '# '#! # (# )*#'! +' '

  , !!##, *', * - . )#   - -14

&'( '(  5$*# 

"% &67  8'9: &/

24; 7   !14; 7  6

'**+$ '  #! # ! !  %+' ' ' # ) #!  '!#$.

!<= #    % $4

>  &- -#  ? 5$*#  -# ? 2 45$# 

> 7 &- -#  ? 2*-  # 

>  &- -#  ? 2 4)**

> 6@ ' / 5$*#  ? 2 4#  # *" .05$# 

 #$$ '# !% , '!#$! !%* # #   %,  '  %/# '#!

# (# )*#'! +' ', ' '  # % *# +' '#   #

# ! )(&

#  $  $#  -<% $ A#   * #

&   # $**- %  +

  $#

81A6, &$  B- 2  (-

"

5$*#   '$# 

3 # "

-

ENGLISH

  

  

1 SAFETY 5...........................................................

2 INTRODUCTION 8...................................................

2.1 General 8..................................................................

2.2 TechnicalData 8............................................................

2.3 Maincomponents 9.........................................................

3 INSTALLATION 10....................................................

3.1 General 10..................................................................

3.2 Mounting 10.................................................................

3.3 Adjustingthebrakehub 11....................................................

3.4 Connections 12..............................................................

4 OPERATION 13.......................................................

4.1 General 13..................................................................

4.2 Loadingtheweldingwire 14...................................................

4.3 Changingthefeedroller 15....................................................

4.4 Fillingwithflux 15............................................................

5 MAINTENANCE 16....................................................

5.1 General 16..................................................................

5.2 Daily 16.....................................................................

5.3 Regularly 16.................................................................

6 FAULTTRACING 17..................................................

6.1 General 17..................................................................

6.2 Possiblefaults 17............................................................

8 ORDERINGOFSPAREPARTS 18......................................

DIMENSIONDRAWING 19................................................

WEARCOMPONENTS 20.................................................

SPAREPARTSLIST 21..................................................

- 5 -

SafeArcS GB

1 SAFETY

Users of ESAB welding equipment have the ultimate responsibility for ensuring that

anyone who works on or near the equipment observes all the relevant safety pre-

cautions. Safety precautions must meet the requirements that apply to this type of

welding equipment. The following recommendations should be observed in addition

to the standard regulations that apply to the workplace.

All work must be carried out by trained personnel well-acquainted with the oper-

ation of the welding equipment.

Incorrect operation of the equipment may lead to hazardous situations which can

result in injury to the operator and damage to the equipment.

1. Anyone who uses the welding equipment must be familiar with:

its operation

location of emergency stops

its function

relevant safety precautions

welding

2. The operator must ensure that:

no unauthorised person is stationed within the working area of the

equipment when it is started up.

no-one is unprotected when the arc is struck

3. The workplace must:

be suitable for the purpose

be free from draughts

4. Personal safety equipment

Always wear recommended personal safety equipment, such as safety

glasses, flame-proof clothing, safety gloves. Note! Do not use safety

gloves when replacing wire.

Do not wear loose-fitting items, such as scarves, bracelets, rings, etc.,

which could become trapped or cause burns.

5. Protection against other risks

Dust particles of a certain size can be harmful to man. A ventilation system

and extractor should therefore be provided to eliminate this risk.

6. General precautions

Make sure the return cable is connected securely.

Work on high voltage equipment may only be carried out by a qualified

electrician.

Appropriate fire extinquishing equipment must be clearly marked and close

at hand.

Lubrication and maintenance must not be carried out on the equipment

during operation.

- 6 -

SafeArcS GB

WARNING, RISK OF CRUSHING!

Do not use safety gloves when replacing wire, feed rollers and wire bobbins.

WARNING

ARC WELDING AND CUTTING CAN BE INJURIOUS TO YOURSELF AND

OTHERS. TAKE PRECAUTIONS WHEN WELDING. ASK FOR YOUR

EMPLOYER'S SAFETY PRACTICES WHICH SHOULD BE BASED ON MANU-

FACTURER'S HAZARD DATA.

ELECTRIC SHOCK - Can kill

Install and earth the welding unit in accordance with applicable standards.

Do not touch live electrical parts or electrodes with bare skin, wet gloves or wet

clothing.

Insulate yourself from earth and the workpiece.

Ensure your working stance is safe.

FUMES AND GASES - Can be dangerous to health

Keep your head out of the fumes.

Use ventilation, extraction at the arc, or both, to keep fumes and gases from

your breathing zone and the general area.

ARC RAYS - Can injure eyes and burn skin

Protect your eyes and body. Use the correct welding screen and filter lens and

wear protective clothing.

Protect bystanders with suitable screens or curtains.

FIRE HAZARD

Sparks (spatter) can cause fire. Make sure therefore that there are no inflam-

mable materials nearby.

NOISE - Excessive noise can damage hearing

Protect your ears. Use ear defenders or other hearing protection.

Warn bystanders of the risk.

MALFUNCTION

Call for expert assistance in the event of malfunction.

PROTECT YOURSELF AND OTHERS!

READ AND UNDERSTAND THE INSTRUCTION MAN-

UAL BEFORE INSTALLING OR OPERATING.

- 7 -

SafeArcS GB

- 8 -

hfc1d1ea

2 INTRODUCTION

2.1 General

The A6S Compact 300 welding head is designed for submerged arc welding (SAW)

of butt and fillet joints.

It's intended for use in combination with PEH/ PEK and ESAB's welding power

sources LAF or TAF.

It can be mounted on a beam-travelling carriage or on a welding column and boom

unit.

The welding head can be used inside pipes having a minimum diameter

of 300 mm for longitudinal welding and 500 mm for circumreferential welding.

2.2 Technical Data

    

     800 A

  

Steel

Stainless 3-4 mm

3.2 mm

 0.1-1.7 m/min

 ! 42 V

 "!#   68 dB

$ ! ! 50 mm

! ! ! 360

 % 

Standard

High speed 0,2-4.0 m/min

0.4-8.0 m/min

- 9 -

hfc1d1ea

2.3 Main components

1. Motor with gear (A6 VEC)

See instruction manual 0443 393 xxx.

2. Wire straightener

Used for guiding and feeding the welding wire down into the wire guider.

3. Slide

Vertical alignment 25 mm

Horizontal alignment 25 mm

4. Contact tube

Transfers welding current to the wire during welding.

5. Wire guider

Used to guide the wire into the contact tube.

6. Flux hopper

The flux is filled into the flux hopper and is then transferred to the workpiece

through the flux nozzle.

See “Filling with flux on page 15.

7. Flux nozzle

8. Flux suction pipe

Used for recovering surplus flux.

- 10 -

hfc1i1ea

3 INSTALLATION

3.1 General

The installation must be executed by a professional.

WARNING

Rotating parts can cause injury, take great care.

3.2 Mounting

The welding head should be installed using M12 bolts. It must be firmly secured to

prevent it working loose.

N.B.

Make sure the bolts do not touch the bottom of the insulator, which has a thread

depth of 14 mm.

See the dimension drawing on page 19.

Inhaltsverzeichnis

Andere ESAB Schweißsystem Handbücher

ESAB

ESAB Origo Tig 3000i Bedienungsanleitung

ESAB

ESAB Warrior 750i CC/CV Bedienungsanleitung

ESAB

ESAB LUA 400 Bedienungsanleitung

ESAB

ESAB LPH 120 Bedienungsanleitung

ESAB

ESAB Origo Mig C151 Bedienungsanleitung

ESAB

ESAB TIG 300i Bedienungsanleitung

ESAB

ESAB EMP 215ic Bedienungsanleitung

ESAB

ESAB Caddy Mig C200i Bedienungsanleitung

ESAB

ESAB EMP235ic Bedienungsanleitung

ESAB

ESAB Caddy Tig 2200iw Bedienungsanleitung

ESAB

ESAB Origo Arc 250 edw Leitfaden

ESAB

ESAB Caddy Tig 2200i AC/DC Bedienungsanleitung

ESAB

ESAB Caddy Series Bedienungsanleitung

ESAB

ESAB Warrior 400i CC/CV Bedienungsanleitung

ESAB

ESAB LKB 265 Bedienungsanleitung

ESAB

ESAB PKB 250 Bedienungsanleitung

ESAB

ESAB Warrior 350i MV CC Bedienungsanleitung

ESAB

ESAB OrigoArc 200 Bedienungsanleitung

ESAB

ESAB ARC 601i Bedienungsanleitung

ESAB

ESAB THERMAL DINAMICS CUTMASTER 60i Bedienungsanleitung

ESAB

ESAB Powercut 650 Bedienungsanleitung

ESAB

ESAB AristoMig U500 Bedienungsanleitung

ESAB

ESAB Powercut-1600 Bedienungsanleitung

ESAB

ESAB EPP-360 Bedienungsanleitung

Beliebte Schweißsystem Handbücher anderer Marken

Berner

Berner PLASMACUT 54 Bedienungsanleitung

Pro Spot

Pro Spot PR-155 Bedienungsanleitung

Forney

Forney 210 Bedienungsanleitung

Thermal Arc

Thermal Arc 400S Bedienungsanleitung

Lincoln Electric

Lincoln Electric HANDYMIG 170I Bedienungsanleitung

GYS

GYS PROTIG 201 AC/DC Bedienungsanleitung

TAFA

TAFA 30*8B35 Bedienungsanleitung

Lincoln Electric

Lincoln Electric INVERTEC V350-PRO CE Bedienungsanleitung

CIGWELD

CIGWELD 636804 Kurzanleitung

Red-D-Arc

Red-D-Arc DC-400 Bedienungsanleitung

Hobart Welding Products

Hobart Welding Products Spool Gun DP 3035-10 Bedienungsanleitung

Elettro

Elettro HI-MIG 3000 SYNERGIC Bedienungsanleitung

WIA

WIA Weldmatic 270 CP132-2 Bedienungsanleitung

Sonics

Sonics H520T Bedienungsanleitung

Miller

Miller Big Blue 400D Bedienungsanleitung

NewArc

NewArc RT2000 Kurzanleitung

Hypertherm

Hypertherm powermax1000 Bedienungsanleitung

Lincoln Electric

Lincoln Electric POWER WAVE I400 Bedienungsanleitung