Escali RL136 Bedienungsanleitung
OWNER’S MANUAL
WWW.ESCALI.COM
PORTION CONTROL SCALE
R-SERIES
MODEL # RL136
Thank you for your purchase! Please read the owner’s
manual carefully to ensure proper function of your scale.
2
BASIC SETUP
1. Plug in the 9-volt wall adapter (included.)
2. Remove the clear plastic film from the Display Unit and the white plastic
film from the stainless steel platform.
PARTS LABELED
* Denotes parts that come aached to the scale. Reference the drawings below during assembly.
ASSEMBLYING THE DISPLAY CONFIGURATIONS
A) Aached Display Configuration
• The scale comes assembled in the Aached Display Configuration.
• Follow steps 1-9 until the desired display configuration is assembled.
7 mm Screw
14 mm Screw
13 mm Screw
Wall Mount
Screw
Drywall
Anchor
(le) Grey
Bracket
Metal Display
Mount
(right) Grey
Bracket
Spacing
Washwer
x2
x4 x2x2 x2 x2
Aention: Parts not drawn to scale.
Display Unit
Scale
Coiled Extension CordVertical Arm
Display Cord
*
*
*
*
*
*
*
*
A
A) B) C) D)
Aached Display Detached Tabletop Display Wall Mount Display Standing Mount Display
3
B) Detached Tabletop Display Configuration
1. Unscrew the two 13 mm Screws connecting the Display Unit to the
Metal Display Mount, and save the two 13 mm Screws for step 8.
Skip steps 2-3 for D) Standing Mount Display Configuration.
2. Unscrew the two 14 mm Screws that aach the Metal Display Mount to
the underside of the scale. Spin the Metal Display Mount around so it
no longer protrudes from the underside of the scale and reaach it with
the Spacing Washers remaining inbetween.
C) Wall Mounted Display Configuration
3. Add the Coiled Extension Cord to the Display Cord.
4. Remove the four 7 mm Screws from the two Grey Brackets located
underneath the Display Unit, and save the 7 mm Screws for step 6.
5. Tuck the Display Cord all the way into Notch A at the top of the Vertical
Arm, and slide the Vertical Arm into the Display Unit. It will be a tight fit.
Reference the Vertical Arm drawing on page 2 to locate Notch A.
6. Use the four 7 mm Screws saved from step 4 to fasten the Vertical Arm
to the Display Unit.
Skip step 7 for D) Standing Mount Display Configuration.
7. Aach the two Wall Mount Screws to a wall vertically spaced and 4
cm apart on center. Hang the Vertical Arm and Display Unit on the
two Wall Mount Screws. Pre-drill 1/4 inch diameter holes for the Drywall
Anchors when mounting onto a drywall surface, or 3/32 inch diameter
holes for the Wall Mount Screws alone.
D) Standing Mount Display Configuration
8. Use the two 13 mm Screws saved from step 1 to aach the Metal
Display Mount inbetween the rubber feet of the Vertical Arm. The
Metal Display Mount should protrude in the direction the Display Unit
is facing.
9. Plug the Display Cord into the scale.
Aention! Save all unused parts for future reconfigurations.
PRODUCT SUPPORT
24/7 Online community support: hp://escali.zendesk.com
Email support: feedback@escali.com
Phone support: 1-800-467-6408
4
Product Guide
WEIGHT MEASUREMENTS
1. Press ON/OFF/TARE to turn the scale on.
2. Press MODE to change units: Pounds, pounds+ounces, ounces, fluid
ounces, kilograms and milliliters.
See pages 4-5 for details on Counting Mode (5, 10, 25, 50 piece sample sizes)
and Percentage Weighing.
3. Place an item on the scale in the center of the platform.
TARE (ADD & WEIGH)
To ignore the weight of a container:
1. Place a container on the platform before turning the scale on.
-OR-
1. Turn on the scale, add the container and press TARE or ZERO.
2. Add items into the container to be weighed.
Find the individual weight of multiple items in one container:
1. Press TARE or ZERO to reset the scale back to zero weight.
2. Add additional items to be weighed.
3. Repeat steps 1-2 for each additional item.
Reset the scale back to zero weight:
1. If nothing is on the scale and it does not read zero weight, press TARE
or ZERO to reset the scale back to zero weight.
Aention! The scale will tare any amount of weight. Once the total weight
actually on the scale reaches the maximum capacity of 13 pounds (6kg.) the
overload warning code (E) will display.
TARE FOOT PEDAL (OPTIONAL ACCESSORY)
An optional Tare Foot Pedal is avaliable, which allows hands free tare
functionality. For more information visit: www.escali.com
COUNTING MODE
1. Press MODE to select a sample quantity (5, 10, 25, 50 pcs.)
2. Place a sample of the items to be counted on the scale .
3. Press ON/OFF/TARE to confirm.
4. Place your total quantity on the platform. Display will show the total
quantity.
5
PERCENTAGE WEIGHING
1. Press MODE until you see “100.0%” on the display.
2. Place object on the platform.
3. Press ON/OFF/TARE to confirm.
4. Remove object and replace with a new object to be weighed.
5. Object’s weight percentage as compared to the original object’s weight
will display.
BLUE BACKLIGHT DISPLAY
• The backlight will turn on when the LIGHT buon is pressed.
• The backlight turns off automatically aer 1 minute of inactivity.
LCD WARNING MESSAGES & SYMBOLS
E Overload warning.
Er 1 Not enough or no sample weight on the scale in Counting Mode.
Scale is stable and ready to measure.
PROPER USE & CARE
• Use and stow the scale at room temperature.
• Use on a flat, level and stable surface.
• The scale is an instrument of precision. Do not submit the scale to
shaking, excessive vibration or other rough treatment.
• The display may be affected by electromagnetic disturbances such as
radios, microwaves or cell phones. If such disturbances occur, remove
the source of the disturbance & restart the scale.
• Disassembling or tampering with the scale voids the warranty.
• Clean the scale with soap and a damp cloth.
• Do not submerge in liquid. The scale is not waterproof.
• You may remove the stainless steel weighing platform to wash seperately.
6
PRODUCT SPECIFICATIONS
Model: RL136
Capacity: 13 lb (6 kg.)
Graduation: 0.1 oz. (2 g.)
Product Dimensions: 12 inches x 15-3/4 inches x 3 inches.
Platform dimensions: 12 inches x 12 inches
Power Source: 9-Volt wall adapter
1 YEAR WARRANTY
This scale is guaranteed to be free of defects in materials and workmanship.
For more information visit: www.escali.com/warranties
PRODUCT SUPPORT
24/7 Online community support: hp://escali.zendesk.com
Email support: feedback@escali.com
Phone support: 1-800-467-6408
7
NOTES
8
Escali’s liability is limited to two (2) times the cost of the product.
© Escali Corp., Minneapolis, MN, USA. All rights reserved. Escali, the Escali logo and other Escali
marks are owned by Escali Corp. and may be registered.
ESCALI CORPORATION
3203 Corporate Center Drive, Suite 150
Burnsville, MN 55306
USA
Inhaltsverzeichnis
Andere Escali Skala Handbücher
Escali
Escali US200L Bedienungsanleitung
Escali
Escali USHM180G Bedienungsanleitung
Escali
Escali Vera PR2000S Bedienungsanleitung
Escali
Escali Primo Bedienungsanleitung
Escali
Escali B180SB Bedienungsanleitung
Escali
Escali USHM180G Bedienungsanleitung
Escali
Escali B180SG Bedienungsanleitung
Escali
Escali Track & Target USTT180 Bedienungsanleitung
Escali
Escali TRACK & TARGET USTT180 Bedienungsanleitung
Escali
Escali XL180 Bedienungsanleitung
Escali
Escali ECO200 Bedienungsanleitung
Escali
Escali SmartConnect SC115KS Bedienungsanleitung
Escali
Escali Primo P115 Bedienungsanleitung
Escali
Escali SmartConnect SC115KS Bedienungsanleitung
Escali
Escali 2210IB Bedienungsanleitung
Escali
Escali 157 Bedienungsanleitung
Escali
Escali SmartConnect SC115KS Bedienungsanleitung
Escali
Escali USHM180G Bedienungsanleitung
Escali
Escali Measuring What's Next Sola Bedienungsanleitung
Escali
Escali E15CB Bedienungsanleitung
