Escali W6630 Bedienungsanleitung

Stainless Steel

Washdown Scale

Model # W6630

www.escali.com

PRODUCT

MANUAL

INTIAL SETUP

The platform of the scale should be unloaded before powering on the

scale. Press the ON/OFF key to power on the scale. Wait a few

seconds while the scale is started up with a display test.

WEIGHING AN ITEM

1. Select your desired unit of measurement by pressing the Ukey.

2. Gently place an item onto the platform.

3. The weight of the item will appear on the display.

TARE FEATURE

This feature allows you to obtain the exact weight of an item in a

container by subtracting the weight of the container.

1. Gently place the container without the item on the platform.

2. Press the TARE key. The weight of the container will be removed,

and the display will reset to zero.

3. Slowly add the item to the container. The display will show the

weight of the item only.

4. You may continue to determine the weight of each additional item

as they are added by repeating steps 2 & 3.

PRODUCT KEY DESCRIPTION

RECALLING GROSS WEIGHT

After taring an item, press the G/N key to recall the gross weight of the

items previously tared. Press G/N key again to return to your net

weight.

TARE MEMORY: STORING A TARE

1. Press the PLU key; [PLUPro] will now be displayed.

2. By using the RIGHT or LEFT arrow keys, scroll through the options

until [tLUPro] is displayed.

3. Press the ENTER key, located in the middle of the arrow keys;

[tLU 01] will now be displayed.

4. Select a memory slot number by pressing the UP or DOWN arrow

keys. You can store up to 20 different tare settings.

5. Press the ENTER key when you have determined your memory slot

number.

6. Enter a tare value you would like to store into memory by using the

arrow keys. (UP/DOWN to modify digit, RIGHT/LEFT to move to a

different digit)

7. Press the ENTER key to save the tare value. [tLUPro] will now be

displayed; Press the U key to return to weighing mode.

TARE MEMORY USE

1. While in weighing mode with no items on the platform, press and

hold the TARE key until [tLU 01] is displayed.

2. Using the UP or DOWN arrow keys, select the memory slot number

you want to use, and press the ENTER key to confirm.

3. The scale will now display the tare value with a negative sign.

Now you can place an item on the platform, and the tare value will be

deducted from your net value.

AUTO TARE FEATURE

This allows a container to automatically be deducted without pressing

the TARE key. (NOTE: The scale detects and tares the first item placed

onto the platform.)

ACTIVATE AUTO TARE

1. Press the PLU key. [PLUPro] will be displayed. Use the RIGHT or

LEFT arrow keys to scroll through the options until [AUt-t] is

displayed; press the ENTER key.

2. [AUt - t0] is now displayed. Use the UP or DOWN arrow keys to

select the following:

[ t0 ]—disable Auto Tare, [ t1 ]—Enable Auto Tare.

After determining your selection, press the ENTER key.

3. [AUt-t] is now displayed again, press the U key to return to weighing

mode.

Repeat previous steps to disable the Auto Tare feature.

ACCUMULATIVE WEIGHING

This feature adds up all weighing values, and displays a total value.

To accumulate the weighing values:

1. Place an item on the platform.

2. When the display shows a stabilized weight value, press the M+ key

to add the weight value to the total.

3. Remove item, and repeat steps 1 & 2 for additional items.

4. Press the MR key to recall the total accumulated value.

5. To erase the total accumulated value, press the MC key or power

off the scale.

COUNTING FEATURE

The counting feature is used to count the same type of item to ensure

accurate counting. You can use sample sizes of 10, 20, 30, 50, or 100.

HOW TO SET A SAMPLE SIZE

1. While your display is reading zero on weigh mode, press and hold

down the Ukey until a flashing number appears.

2. Using the UP or DOWN arrow keys, determine the sample size you

want to use. (NOTE: With lighter items, it is best to use a higher

sample size.)

3. Once you have determined the sample size you want to use, set the

items gently onto the platform while the sample size number is still

flashing. (Example: For a sample size of 10, place 10 items onto the

platform.)

4. Press the ENTER key to confirm. Now you can add or remove items

from the platform.

To return to weighing mode, simply press the Ukey.

To resume counting mode, continue to press the Ukey until the pieces

symbol of a dotted triangle is displayed.

SAVE A SAMPLE SIZE PRESET

NOTE: Prior to setting a preset, you will need to set your sample size.

1. While on the piece counting mode, press the PLU key.

2. [PLUPro] will be displayed; press the RIGHT arrow key until

[CLUPro] is displayed, then press the ENTER key.

3. A flashing number will appear on the right side of the display, these

are memory slots where you can save up to 100 different

settings (00-99).

4. Use the UP or DOWN arrow keys to adjust the digit, and use the

RIGHT or LEFT arrow keys to move to a different digit.

5. Press the ENTER key to confirm memory slot. [CLUPro] will

appear on the display again.

6. Press the Ukey to return to piece counting mode.

ACCESSING A SAMPLE SIZE PRESET

1. Press and hold the G/N key, while in piece counting mode.

2. [CLU 01] will be displayed; select a memory slot by pressing the UP

or DOWN arrow key, and then press the ENTER key to confirm.

You will be returned to piece counting mode with the setting you

have entered into that designated memory slot.

NOTE: Powering off the scale does not clear saved sample sizes.

AUTO HOLD FEATURE

1. Press the PLU key. [PLUPro] will now be displayed.

2. Use the RIGHT or LEFT arrow key to locate the option [HoLd].

3. Press the ENTER key. [Hold 0] will now be displayed.

4. To select the different features of “auto hold” use the UP or DOWN

arrow keys to select the following:

[ 0 ]–Disable auto hold feature.

[ 1 ]–Display peak value.

[ 2 ]–Holds initial weight.

[ 3 ]–Holds initial weight until the item is removed.

[ 4 ]–Holds weight when a second item is placed on the platform.

Press the ENTER KEY after you have determined the option you want

to use. [HoLd] will be displayed; press the U key to return to weighing

mode. When weighing, wait for a beep to confirm the hold feature has

worked.

NOTE: Press the TARE key to reset the scale to zero weight after using

the auto hold feature.

AUTO SHUT-OFF SETUP

1. Press the PLU key. [PLUPro] will be displayed.

2. Press the RIGHT or LEFT arrow keys to locate [AUt-0]. Press the

ENTER key to confirm.

3. [oFF–0] will now be displayed. Select the following options by using

the UP or DOWN arrow keys:

[ 0 ]–Disable automatic shut-off.

[ 1 ]–Automatic shut-off after 1 minute of non-use.

[ 2 ]–Automatic shut-off after 2 minutes of non-use.

[ 3 ]–Automatic shut-off after 3 minutes of non-use.

[ 4 ]–Automatic shut-off after 4 minutes of non-use.

[ 5 ]–Automatic shut-off after 5 minutes of non-use.

4. After determining the option you want to use, press the ENTER key

to confirm, and then press the Ukey to return to weighing mode.

ACTIVATING STABLE FILTER

This feature is used for rough environmental conditions with unstable

ground levels. You can enable a stable filter to increase or decrease the

response speed.

1. Press the PLU key. [PLUPro] will now be displayed.

2. Use the RIGHT or LEFT arrow keys to scroll through the options

until you locate [FiLtEr]. Press the ENTER key to confirm.

3. [FLtr x] is now displayed (“x” being the filter setting). Here you can

select the response speed by using the UP or DOWN arrow keys:

[ 0 ]–Original factory settings

[ 1 ]–Stable environment [fast response]

[ 2 ]–Medium stable environment [medium response]

[ 3 ]–Unstable environment [low response]

[ 4 ]–Very unstable environment [slow response]

[ 5 ]–Very very unstable environment [very slow response]

[ 6 ]–Super unstable environment [super slow response]

4. After determining which option is best for your work environment,

press the ENTER key to confirm your selection.

5. Press the U key to return to weighing mode.

ACTIVATE / DEACTIVATE KEYPAD SOUND

1. Press the PLU key. [PLUPro] will now be displayed.

2. Use the RIGHT or LEFT arrow keys to scroll and locate [bEEP].

3. Press the ENTER key to confirm.

4. Using the UP or DOWN arrow keys, choose the following:

[ 0 ]–Sound off [ 1 ]–Sound on

5. Press the ENTER key to confirm. [bEEP] will appear again on

display; press the U key to return to weighing mode.

ENABLE / DISABLE DISPLAY BACKLIGHT

1. Press the PLU key. [PLUPro] will now be displayed.

2. Using the RIGHT or LEFT arrow keys, scroll and locate [bL-Set].

3. Press the ENTER key to confirm.

4. Using the UP or DOWN arrow keys, select: [ON], [OFF], or [AUTO].

5. After you have determined which option you want to use, press the

ENTER key to confirm.

6. [bL-Set] will appear again on display; press the U key to return to

weighing mode.

PRODUCT SPECIFICATIONS

Model: W6630

Capacity: 66 lb / 30 kg

Graduation: 0.005 kg / 0.25 oz

Product Dimensions: 13 x 11.5 x 4 inches

Power Source: 6V 5.0Ah Rechargeable battery (included),

12-volt wall adapter (included)

Automatic shut-off: Customizable

NOTES:

Inhaltsverzeichnis

Andere Escali Skala Handbücher

Escali

Escali ECO180 Bedienungsanleitung

Escali

Escali Granda Granda Platform Scale Bedienungsanleitung

Escali

Escali POP Bedienungsanleitung

Escali

Escali BMI150R Bedienungsanleitung

Escali

Escali Alimento NSF 136KP Bedienungsanleitung

Escali

Escali ECO200 Bedienungsanleitung

Escali

Escali Alta Bedienungsanleitung

Escali

Escali Primo P115 Bedienungsanleitung

Escali

Escali Vera PR2000S Bedienungsanleitung

Escali

Escali BFBW180 Bedienungsanleitung

Escali

Escali Lunar Blue Bedienungsanleitung

Escali

Escali Pana Bedienungsanleitung

Escali

Escali Aqua Aqua Liquid Measuring Scale Bedienungsanleitung

Escali

Escali Aqua Bedienungsanleitung

Escali

Escali F115 Bedienungsanleitung

Escali

Escali Savu Space Bedienungsanleitung

Escali

Escali SmartConnect SC115KS Bedienungsanleitung

Escali

Escali SmartConnect SC200BS Bedienungsanleitung

Escali

Escali B180SB Bedienungsanleitung

Escali

Escali TASO Bedienungsanleitung

Escali

Escali RL136 Bedienungsanleitung

Escali

Escali ST115 Bedienungsanleitung

Escali

Escali 25 Lb Bedienungsanleitung

Escali

Escali EW180 Bedienungsanleitung

Beliebte Skala Handbücher anderer Marken

AWS

AWS ZEO-50 Bedienungsanleitung

Gima

Gima Glass Body Fat Analyzer Stücklistenhandbuch

Seca

Seca 374 Bedienungsanleitung

TEC

TEC TEC SL59 SERIES Bedienungsanleitung

Axis

Axis B/E Series Bedienungsanleitung

Alecto

Alecto ACW-40 Bedienungsanleitung

Rice Lake

Rice Lake MSI-4260 IS Bedienungsanleitung

IKA

IKA RCT basic safety control Bedienungsanleitung

ADE

ADE M20011 Bedienungsanleitung

Duronic

Duronic KS3000 Bedienungsanleitung

Digi

Digi SM-720 Bedienungsanleitung

Cardinal

Cardinal CS Series Bedienungsanleitung

Korona

Korona Kastella Bedienungsanleitung

A&D

A&D FC-50Ki Bedienungsanleitung

BDA

BDA CAMARGUE Bedienungsanleitung

Tanita

Tanita HD-357 Bedienungsanleitung

Leifheit

Leifheit 03173 Bedienungsanleitung

Lumme

Lumme LU-1340 Bedienungsanleitung