Triumph Mobility2
a) Do NOT use the rollator to carry heavy
objects.
b) Do NOT push the rollator when someone is
sitting on the seat.
c) Rollator must be fully unfolded when being
used as a walking aid.
d) Always check the brakes are working before
using.
e) Do NOT sit on rollator and push yourself
around using your feet to propel.
f) Do NOT stand on the seat.
g) Parking brake must be applied
before sitting.
h) Do NOT use on stairs or escalators.
i) Exercise caution when walking on sloped
surfaces.
j) Do NOT hang objects from the backstrap.
k) Do NOT use if the rollator is not functioning
properly.
l) The weight capacity of the rollator is
250Ibs/113Kgs.
m) The weight capacity of the shopping bag
is 11Ibs/5Kgs.
n) When storing your rollator, do not store
other items on top of your rollator.
1. For Your Safety
* Phillips screwdriver required
TheTriumph Mobility Escape rollator consists of
the following parts.
(a) Rollator frame.
(b) Brake handles (pair).
(c) Shopping Bag.
(d) Backstrap & 2 screws and nuts.
Check each part carefully for shipping damage.
Do not use the rollator if there are signs of
damage and/or parts missing.
2. Assembly
Rollator should be in the unfolded position
before beginning. While holding the ‘RED’
release lever in the open position, slide the
brake handle into the frame. Rectangular slots
on the brake handle tube should be facing
inwards.
The metal rod protruding from bottom of
brake handle tube must be inserted into the
rectangular slot in the middle of the frame.
Set the desired handle height, and close the
‘RED’ release lever. The release lever should
‘click’ when locked into the closed position.
Note: If brake handles are inserted with the
rectangular slots facing outwards, you will be
unable to set the handle height, as the ‘RED’
release lever will not close, and the brake will
not function.
Install the brake handles
a
b
c
d
