Esco HURRICANE 20387 Bedienungsanleitung

1.800.352.9852 • [email protected] • www.esco.net 1

EQUIPMENT SUPPLY COMPANY

REV. 1.19

Thank you for choosing ESCO tire service tools and equipment. We suggest you read this instruction manual

thoroughly before using the product. Save this instruction manual for future use.

INSTRUCTION MANUAL

HURRICANE BEAD SEATING TANK

ESCO #20387—5 GALLON

ESCO #20388—9 GALLON

ESCO #20389—13 GALLON

1.800.352.9852 • [email protected] • www.esco.net 2

TABLE OF CONTENTS

• Introduction……………………………………………………………………………………………….2

• Specifications…………………………………………………………………………………………….2

• General Safety Rules…………………………………………………………………………………....3

• Operating Instructions………………………………………………………………………………….4

• Parts Breakdown ………………………………………………………………………………………. 5

• Warranty………………………………………………………………………………………………….. 6

• Parts and Repair Service……………………………………………………………………………… 7

INTRODUCTION

The Hurricane Bead Seating Tanks are available in three models with ranging tank capaci-

ties. All models are equipped with robust air tanks, casted out of aluminum and ASME certi-

fied. The Hurricane Bead Seating Tanks are a hassle-free, simple solution to seat the beads

on small ATV up to OTR-sized tires. The Hurricane 5-gallon Bead Seating Tank is recom-

mended for small and passenger tire application. The Hurricane 9-gallon Bead Seating Tank

is recommended for most commercial tire sizes, skid steers and some tractor tires. The 13-

gallon Hurricane Bead Seating Tank is specifically design for heavy duty truck tire applica-

tion (22.5 and 24.5) as well as most construction and agricultural tires.

SPECIFICATIONS

HURRICANE BEAD SEATING TANK #20387 #20388 #20389

MODEL

NO.

TANK

CAPACITY

RECOMMENDED

OPERATING

PRESSURE

WEIGHT DIMENSIONS

20387 5 GALLON 40-155 PSI 16.5 lb (7.5 kg) 29.9” (760 mm) x 10.6” (270 mm)

x10.2” (260 mm)

20388 9 GALLON 40-155 PSI 18.7 lb (8.5 kg) 27.5” (700 mm) x 14.9” (380 mm)

x 12.9” (330 mm)

20389 13 GALLON 40-155 PSI 20.9 lb (9.5 kg) 30.3” (770 mm) x 14.9” (380 mm)

x 12.9” (330 mm)

1.800.352.9852 • [email protected] • www.esco.net 3

WARNING

• Read and understand all instructions. Failure to comply could result in death, bodily injury

and/or damage to equipment.

• Do not allow children or untrained individuals to use this product.

• Always wear ANSI and OSHA standard Personal Protective Equipment when using this

product. Not wearing eye wear, non-slip shoes or hearing protection may result in injury.

• Do not modify or use non-factory authorized parts on this product.

• Do not inflator or over flate the tire.

• Keep bystanders 20 feet away when tank is charged.

• Do not use this product for any other purpose than what it is designed for.

• Do not store or transport charged bead seating tanks. Discharge the air tank when it is not

in use.

• Always follow OSHA 1910.77 standard* while using this product.

• Always visually inspect the product before use for damage. Do not use product if dam-

aged, altered, or in poor condition. Contact our technical service department with any

questions or product issues by calling 800-352-9852.

EYE PROTECTION

MUST BE WORN

HEARING PROTECTION

MUST BE WORN

RESTRAINING DEVICE

MUST BE USED DURING

INFLATION/DEFLATION

GENERAL SAFETY RULES

*OSHA 1910.177 standard

1910.177(d)(1)

The employer shall furnish a restraining device for inflating tires on multi-piece wheels.

1910.177(d)(2)

The employer shall provide a restraining device or barrier for inflating tires on single piece wheels unless the rim wheel will be bolted onto a vehicle during

inflation.

1910.177(d)(3)

Restraining devices and barriers shall comply with the following requirements:

1910.177(d)(3)(i)

Each restraining device or barrier shall have the capacity to withstand the maximum force that would be transferred to it during a rim wheel separation occur-

ring at 150 percent of the maximum tire specification pressure for the type of rim wheel being serviced.

1910.177(d)(3)(ii)

Restraining devices and barriers shall be capable of preventing the rim wheel components from being thrown outside or beyond the device or barrier for any

rim wheel positioned within or behind the device;

1910.177(d)(3)(iii)

Restraining devices and barriers shall be visually inspected prior to each day's use and after any separation of the rim wheel components or sudden release of

contained air. Any restraining device or barrier exhibiting damage such as the following defects shall be immediately removed from service.

HURRICANE BEAD SEATING TANK #20387 #20388 #20389

1.800.352.9852 • [email protected] • www.esco.net 4

OPERATING INSTRUCTIONS

1. Always wear eyewear, hearing protection and the proper footwear while operating the

Hurricane Bead Seating Tank.

2. Keep work area clear.

3. Firmly hold the Hurricane Bead Seating Tank at an approximately 45 degree angle from

floor with guide on top of rim (Figure 1).

4. DO NOT TOUCH THE TIRE DURING THIS PROCESS.

5. Securely holding the Hurricane Bead Seating Tank by placing one hand on the Hurricane

Bead Seating Tank handle and the other on the handle/button.

6. Push button. Operating pressure of unit is 40-155 PSI from compressed air supply. Fill

bead seating tank to a minimum of 40 psi from air compressor. Increase pressure as nec-

essary. The safety pop-off is set at 165 psi (11.3 bar).

NOTE: Most often, tires can be seated between 80-100 PSI. The volume of air to properly seat

the bead may depend on the tire and may require multiple applications for accurate seating.

Larger tires may be too difficult to seat, please make sure to use the proper sized Bead Seater for the Size Tire.

HURRICANE BEAD SEATING TANK #20387 #20388 #20389

BEFORE SERVICE: Prepare each wheel by cleaning the rims and visually inspecting

for any residue on the wheel surface as flying debris may enter the air during use.

Figure 1.

RECOMMENDED PRESSURE CHART

Tire Type Pressure

ATV 40 PSI / 2.75 BAR

Passenger Car Radial Tire 60 PSI / 4.15 BAR

LT/SUV 80 PSI / 5.5 BAR

Truck and Bus Radial Tire 100 PSI / 6.9 BAR

OTR 120-155 PSI / 8.25-10.6 BAR

HANDLE

AIR TANK

GUIDE

THREADED

BARREL

AIR PRESSURE

GAUGE

SAFETY

RELEASE VALVE

PUSH-BUTTON

TRIGGER

1.800.352.9852 • [email protected] • www.esco.net 5

PARTS BREAKDOWN

DESCRIPTION PART NUMBER

1. THREADED FLARRED BARREL 20390-1

2. FILLER VALVE 20390-8

3. PRESSURE GAUGE 20390-5

4. SAFETY RELEASE VALVE 20390-7

5. PUSH BUTTON TRIGGER 20387-1

6. RUBBER FEET 20387-2

HURRICANE BEAD SEATING TANK #20387 #20388 #20389

345

FOR ALL HURRICANE MODELS:

1.800.352.9852 • [email protected] • www.esco.net 6

WARRANTY

Products sold by Equipment Supply Company (ESCO) are warranted to be free from de-

fects in material and workmanship under proper use, application, and maintenance in ac-

cordance with ESCO's written recommendations, instructions, and specifications for a pe-

riod of 1 year (365 days) from the date of shipment to the end user, unless otherwise noted.

ESCO's obligation under this warranty is limited to, and the sole remedy for any such de-

fect shall be the repair or replacement (at ESCO's discretion) of unaltered parts returned to

ESCO, freight prepaid, and proven to have such defect, provided such defect occurs within

the 90-day warranty period (or otherwise noted) and is reported within 14 days of occur-

rence.

This is the only authorized ESCO warranty and is in lieu of all other express or implied war-

ranties or representations, including any implied warranties of merchantability or fitness.

Warranty claims must be submitted and be processed in accordance with ESCO's estab-

lished warranty claim procedure. In no event will ESCO be liable for business interruptions,

loss of sales and/or profits, personal injury, costs of delay, or for any other special, indi-

rect, incidental or consequential losses, costs, or damages.

PURCHASE DATE:___________________________________________

MODEL NO.:________________________________________________

SERIAL NO. (If Applicable):____________________________________

NOTES:

___________________________________________________________

HURRICANE BEAD SEATING TANK #20387 #20388 #20389

1.800.352.9852 • [email protected] • www.esco.net 7

PARTS AND REPAIR SERVICE

• ESCO will pick up product for repair/warranty at your location.

• ESCO will guarantee Repair/Service for 30 days.

• ESCO has rental tools available

• ESCO repairs IMT, FEC, Stellar, Blackhawk, OTC, Power Team,

Ame Int., & Enerpac hydraulic pumps, bead breaker, and cylin-

ders.

• Authorized ESCO Repair & Warranty Centers Located through the

US & Canada. For more information contact your ESCO sales rep-

resentative.

• Technical Support Over the Phone Available by Calling 1-800-352-9852

GUARANTEED 1-Day Turnaround Service.

Received by ESCO - Repaired in 24 Hours - Returned to you!

Prompt, reliable service after the sale is very important to ESCO. ESCO maintains an in-house repair facility in

Brooksville, Florida. To insure that our customers have as little down-time as possible, we offer a 1 day turna-

round service. Our factory repair service is equipped with all the tools and machinery needed to repair your

equipment quickly and affordably. Our trained technicians are the best in the industry. Not only do we service

our own products, but we also service our competitors’ products.

In addition to ESCO’s 30 years of providing quality repair service, ESCO has reached out and partnered with

more than 50+ hydraulic repair facilities across the US & Canada, to deliver quality repair and timely return of

products. Visit www.esco.net or call 1.800.352.9852 to hear more about the newly added “Authorized ESCO

Warranty & Repair Facilities” across the US.

If you have a bead breaker, ram, or hydraulic pump that needs repair, ESCO fixes your product with factory

parts and guarantees the repair. In addition to servicing ESCO brand products, we also re-pair CP, IMT, Elrick,

Branick, Goodyear, FEC, AME Int., and Haltec lines of hydraulic bead breakers, rams, pumps, jacks, and many

other hydraulic tire service equipment.

HURRICANE BEAD SEATING TANK #20387 #20388 #20389

1.800.352.9852 • [email protected] • www.esco.net 8

EQUIPMENT SUPPLY COMPANY

REV. 1.19

Thank you for choosing ESCO tire service tools and equipment. We suggest you read this instruction manual

thoroughly before using the product. Save this instruction manual for future use.

CONTACT INFO:

www.esco.net - [email protected]

15270 Flight Path Drive

Brooksville, FL 34604

PH. 352.754.1117

Toll Free. 1.800.352.9852 (US, Canada Only) Fax: 352.754.4508

Stay Connected with ESCO….

WARNING: Cancer and Reproductive Harm- www.P65Warnings.ca.gov

HURRICANE BEAD SEATING TANK #20387 #20388 #20389

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Esco Tankausrüstung Handbücher

Esco

Esco CYCLONE 20380 Bedienungsanleitung

Beliebte Tankausrüstung Handbücher anderer Marken

ARKSEN

ARKSEN 002-AU-30035/GAS35 Bedienungsanleitung

morse

morse 185G Bedienungsanleitung

IVT

IVT LATENTO XXL Series Benutzerhandbuch

Clayton

Clayton WartHog 603-105W Leitfaden

Vetus

Vetus FTL3808B Kurzanleitung

Astro Pneumatic Tool

Astro Pneumatic Tool PT2-4 Bedienungsanleitung

SII

SII 99800088 Bedienungsanleitung

Gardena

Gardena 4000/5 eco Bedienungsanleitung

CALEFACTIO

CALEFACTIO GMP Bedienungsanleitung

Amtrol

Amtrol FILL-TROL FT-109 Montageanleitung

Graf

Graf 160470 UPone 3 EW, 2000 L Bedienungsanleitung

VIAIR

VIAIR 90011 Bedienungsanleitung

Flexcon

Flexcon FLU/H2PLU Bedienungsanleitung

Harbor Freight Tools

Harbor Freight Tools Centralpneumatic 66839 Montageanleitung

DeVilbiss

DeVilbiss QM T-5 Series Referenzhandbuch

Regulus

Regulus PS 80 Z Bedienungsanleitung

KIESELMANN

KIESELMANN TDAM 6180 Bedienungsanleitung

Worthington

Worthington Amtrol THERM-X-TROL ST-447C Montageanleitung