esky ES610 Montage- und Wartungsanleitung
Catalogue
Version history..................................................................................................................................3
1. Structure Introduction ..................................................................................................................4
2. Preparation....................................................................................................................................5
3. Quick Using Steps ..........................................................................................................................6
3.1 Step 1: Insert SIM Card........................................................................................................7
3.2 Step 2: Install ES610 ............................................................................................................7
3.2.1 Connect Lines to ES610 ............................................................................................8
3.2.2 Connect ES610 to the Vehicle ..................................................................................9
3.3 Step 3: Power On.................................................................................................................9
3.4 Step 4: Set APN, Report Server IP (SMS) ...........................................................................10
3.5 Step 5: Query Current Location (SMS) ..............................................................................12
3.6 Step 6: Login Car Online Platform .....................................................................................13
3.6.1 Visit Car Online Platform........................................................................................13
3.6.2 Login Page ..............................................................................................................13
3.6.3 Register an Account................................................................................................14
3.6.4 Default Account for User ........................................................................................15
3.6.5 Start Tracking..........................................................................................................15
3.6.5 Modes Switch Page ................................................................................................16
3.7 Step 7: Set APN, Report Server IP (AT) ..............................................................................18
3.8 Step 8: Normal Function Test (AT).....................................................................................19
4. Install and Operation...................................................................................................................21
4.1 Installation Method...........................................................................................................21
4.2 Installation Site..................................................................................................................21
4.3 Installation Notes ..............................................................................................................22
5. Supplement .................................................................................................................................23
5.1 LED Indication....................................................................................................................23
5.2 Hardware Interface ...........................................................................................................23
Version history
Version Data Note
V1.0 2013-10-8 First version
V1.1 2013-10-11 Add chapter 3.6.4
Default Account for User
V1.2 2013-11-21 Modify chapter 5.2
Hardware Interface
1. Structure Introduction
①ES610 works with power line and I/O line
②USB port
③Supply power port and I/O port
④Dimension: 83mm*43.2mm*17.7mm
○
1
○
4
○
3
○
2
Supply power port
I/O port
2. Preparation
Make sure the equipments below are all available.
Equipment Lists:
Equipment Name Number Note
ES610 1 Necessary
GSM SIM Card 1 Necessary
power Line 1 Necessary
I/O Line 1 Necessary
Power supply (12V- 36V) 1 Necessary (Cigarette Lighter/ OBD)
Data line 1 Not Necessary (For AT command)
3. Quick Using Steps
S: Success
F: Fail
…
S
Fcheck, re-do
Step 1
Insert SIM Card
Step 2
Install ES610
SMS
Step 4 (SMS)
Set APN&IP
Step 5 (SMS)
Normal Function Test
Fcheck, re-do
S
Step 6
Login Online Car Platform
Step 7 (AT)
Set APN,IP
Fcheck, re-do
S
…
Step 8 (AT)
Normal Function Test
Fcheck, re-do
S
AT or SMS AT
Step 3
Power on
F check, re-do
3.1 Step 1: Insert SIM Card
Open the terminal cover, and put the metal side of SIM card face down and then fasten the card
slot co ver.
Note:
SIM Hot-Plug is forbidden for this device.
3.2 Step 2: Install ES610
The terminal is GPS positioning product, it is recommended that you follow the instructions to
install.
1. M
etal side faces
2. Fasten card slot
3.2.1 Connect Lines to ES610
First, connect power supply line to ES610.
Plug the part ②of power supply line into ES610 power supply port (chapter 1 ③)
Second, connect I/O line to ES610
①
②
③
④
Power supply line
I/O line
Plug the part ④of power supply line into ES610 power supply port (chapter 1 ③)
3.2.2 Connect ES610 to the Vehicle
Power lines, it can connect with cigarette lighter or OBD
I/O line, connects terminal with the I/O connector of wire harness.
For the detailed description, please refer to chapter 4.
3.3 Step 3: Power On
When finishing installation, as long as power supply line is connected with cigarette lighter or
OBD, ES610 is powered on and starts work.
Note: If ES610 is connected with cigarette lighter, then only the car is ignition on, cigarette lighter
will has voltage. That means, ES610 can be powered on.
(cigarette lighter)
(OBD)
Then, please check LEDs status.
When ES610 is powered on, the two LEDs –Yellow and green LEDs will light for 10 seconds; then,
only green LED will blink four times; after blinking, yellow and green LEDs will blink together. Wait
for a while, yellow LED will light without blink.
The meaning of each LED means, please refer to chapter 5.1, and hardware interface, please refer
to chapter 5.2.
If not, your situation is:
1) No LED lights
Please check the way you power on or the voltage that power supplies.
2) Only green LED lights
Please make sure that SIM card is inserted.
Please make sure that SIM card is available.
Please make sure that SIM card is not hot plug.
Note:
If you want to test all the commands via SMS, please refer to Step 3, Step 4 and Step 5.
Or if set command by USB (AT), please refer to step 7, step 8.
3.4 Step 4: Set APN, Report Server IP (SMS)
The command to re-set APN and server IP is “GPRS”. The format of “GPRS” is shown below.
For example:
The APN of China Mobile is CMNET.
Inhaltsverzeichnis
Andere esky GPS Handbücher
