ESP APKITG Bedienungsanleitung
USER MANUAL
www.espuk.com
APKITG |COLOUR VIDEO DOOR ENTRY SYSTEM
APKITG Manual.indd 1 26/04/2017 09:43:25
2
System Cabling
All system cabling (excluding mains 240vAC supply) has been tested with Cat5E UTP PVC cable.
Part Number - A8NFORCE5EUTP
Find this product online:
elandcables.com | Cables & Accessories | LAN Cable | Cat 5E UTP PVC Cable
Contents
System Components ...............................................................3
Installation .......................................................................4
System Connections Example 1......................................................5
System Connections Example 2......................................................6
Lock Connections Example 1 ........................................................7
Lock Connections Example 2 ........................................................8
User Guide ........................................................................9
Monitor Overview.................................................................10
Setting Monitor as Master or Slave (Default Master)...................................11
Accessing Monitor Functions.......................................................12
Accessing Monitor Adjustments ....................................................13
Installer’s Guide ................................................................. 14
APKITG Manual.indd 2 26/04/2017 09:43:26
3
System Components
Door Station Monitor
EVBPSBB
Lock Power Supply
EV-EXIT
Push To Release
EV-EBG
Emergency Release
EV-ML-250/500XT
Electro-magnetic Lock
ENTERD
Electric Lock
Optional Accessories
System Power Supply
APKITG Manual.indd 3 26/04/2017 09:43:28
4
90。
1.2 m 1.5 m～
Site the door station a
recommended 1.5 meters from
the ground, or to suit application.
Avoid areas of high sunlight
and noise levels.
Surface mount the sunshield of the door station and
connect the system cabling. Mount the camera to the
sunshield by fixing with the supplied hex screw.
The camera needs to point in
the direction of where a visitor
will stand during operation.
Site the indoor monitor to suit application.
Monitor
1-Gang Mount Box
(if required, not supplied)
Surface mount the bracket of the monitor or if required onto a 1-gang mount box (not supplied).
Make the system connections to the back of the monitor and then slide the monitor onto the
bracket using the hooks to hold firmly in place.
Monitor Mounting
Bracket
Installation
Optional
door bell
connection
APKITG Manual.indd 4 26/04/2017 09:43:29
5
System Connections Example 1
ON
K1
The last monitor on the system line has
the rear ‘K1’ switched ON
1
APKITG Manual.indd 5 26/04/2017 09:43:30
6
System Connections Example 2
ON
K1
1
1. The last monitor on the system line
has the rear ‘K1’ switched ON.
All other monitors ‘K1’ switch to OFF
2. Please review page XXXX to set
monitor to MASTER or SLAVE.
3. If dierent types of Monitor /handset
are being used on the same system,
please refer to the supplied instructions
to adjust Master/ Slave settings .
11 to set
APKITG Manual.indd 6 26/04/2017 09:43:31
7
At the rear of the door station
ensure that the jumper links cover pins
1 and 2, on both J3 and J2 positions
1
2
3
J1 J2
J3
NC
4
3
+
+
+
_
_
_
Electro-magnetic lock Electronic lock
BUS
System Wiring
LOCK1
VCC
J1
Image of
jumper link
Lock -release time
N.C for Electro-magnetic lock
N.O for Electronic lock
Lock Connections Example 1
APKITG Manual.indd 7 26/04/2017 09:43:32
8
The jumpers on the rear of the door station offer different
types of release modes for alternative applications
dependent on the jumper link settings. LOCK1 options;
N.O
N.C
N.O
Volt-free
Volt-free
12vDC300mA
MAX
Jumper 1 gives the option to set the release time;
5
sec. 3
sec.
The door station has a secondry switch. LOCK2 options;
Please refer to the operation guide for release instructions
1
2
3
J1J3 J2
1
2
3
J1J3 J2
1
2
3
J1J3 J2
N.O
N.C
N.O
Volt-free
Volt-free
12vDC300mA
MAX
1
2
3
J1J3 J2
1
2
3
J1J3 J2
1
2
3
J1J3 J2
Image of
jumper link
Image of
jumper link
Lock Connections Example 2
APKITG Manual.indd 8 26/04/2017 09:43:33
9
User Guide
A B C D
1 2
APKITG Manual.indd 9 26/04/2017 09:43:33
10
Monitor Overview
The following monitor instructions are designed to be a quick start guide alongside the informative general user
interface (GUI) . The instructions are not exhaustive and are designed to lead the user quickly to the most often
required aspects of the unit.
APKITG Manual.indd 10 26/04/2017 09:43:33
Inhaltsverzeichnis
Andere ESP Gegensprechanlage Handbücher
ESP
ESP APWIFIDSBP2 Bedienungsanleitung
ESP
ESP Aperta APWIFIDS Bedienungsanleitung
ESP
ESP EV4 Bedienungsanleitung
ESP
ESP aperta EZTAG3 Bedienungsanleitung
ESP
ESP Enterview 5 Bedienungsanleitung
ESP
ESP BDeye Bedienungsanleitung
ESP
ESP Aperta APDSMW Bedienungsanleitung
ESP
ESP APKITKP Bedienungsanleitung
ESP
ESP Aperta APMONWG Bedienungsanleitung
ESP
ESP Enterview 3 Bedienungsanleitung
ESP
ESP Enterview VX Bedienungsanleitung
ESP
ESP Enterview Multi Bedienungsanleitung
ESP
ESP Aperta APWIFIDS-BLK Bedienungsanleitung
ESP
ESP Aperta APDSPXMW Bedienungsanleitung
ESP
ESP Enterview VX Bedienungsanleitung
ESP
ESP aperta apkitao Bedienungsanleitung
ESP
ESP Enterview 3 Bedienungsanleitung
ESP
ESP APWIFIDS2 Bedienungsanleitung
ESP
ESP APWIFIDS2 Bedienungsanleitung
ESP
ESP Aperta APMONWG Bedienungsanleitung
