Essence WeR@Home ESUGSL022 Bedienungsanleitung
WeR@Home™
HD Camera
User Guide
ESUGSL022
Version 1.0
June 2016
Table of Contents
2 WeR@Home™ HD Camera User Guide
Table of Contents
1. Introduction ...........................................................................................................................................3
2. Adding the Indoor HD Camera to WeR@Home™.................................................................................. 4
3. Adding the Outdoor HD Camera to WeR@Home™ ...............................................................................5
4. Installing the Indoor HD Camera ............................................................................................................6
5. Installing the Outdoor HD Camera.........................................................................................................8
6. Configuring the HD Camera ................................................................................................................. 10
7. Using Live View ...................................................................................................................................... 11
8. Technical Specifications.........................................................................................................................12
Appendix A Indoor HD Camera LEDs and Controls................................................................................13
Appendix B End User License Agreement (EULA)................................................................................. 14
Introduction
WeR@Home™ HD Camera User Guide 3
1. Introduction
Use an Essence HD camera with your WeR@Home™ to view live HD video directly in your
WeR@Home™ app. Essence offers both indoor and outdoor HD cameras.
The Essence Indoor HD Camera is an HD cube network camera, which connects to WeR@Home™
using Wi-Fi. The camera supports high quality picture resolution with multiple compression formats
and provides live view with audio capability, which is viewable from the WeR@Home™ mobile app.
Figure 1 – Indoor HD Camera
The Essence Outdoor HD Camera is a weatherproof, network, bullet camera, which fully integrates
with WeR@Home™. The outdoor camera provides high quality 720p HD resolution and MJPEG
encoding, and supports the option of providing power via the network connection using PoE.
Figure 2 – Outdoor HD Camera
Adding the Indoor HD Camera to WeR@Home™
4 WeR@Home™ HD Camera User Guide
2. Adding the Indoor HD Camera to WeR@Home™
Before you physically install an indoor HD camera, add the camera to WeR@Home™.
To add an indoor HD camera to WeR@Home™:
1. Connect the power cable to the camera and a power source.
2. On your router, press the WPS button. For more information, refer to the router’s documentation.
Make sure to connect the camera to the same Wi-Fi network that your mobile device is connected
to.
3. On the back of the camera, press and hold the WPS button for two seconds.
Figure 3 – WPS Button
The NET LED flashes green until the camera connects to the router. When the camera is
connected, the LED lights steady green.
NOTE: If your router doesn’t support WPS, you can connect the indoor camera
to the router using a network cable. For information on switching to Wi-Fi
following the installation, refer to Chapter 6 on page 10.
4. Open the WeR@Home™ app on your mobile device.
5. Tap . The main menu appears.
6. Tap DEVICES. The DEVICES screen appears.
7. Tap . The Add New Devices screen appears displaying the available device types.
8. Select HD Camera. The HD Cameras screen appears displaying the list of HD cameras on your
network.
9. Tap the HD camera you want to add. The Pairing screen appears as the device scan begins. The
pairing process allows the HD camera to communicate with the hub. When pairing succeeds, a
window appears prompting you to enter the HD camera name.
10. Enter a name for the HD camera and/or location and tap Done.
WPS
Adding the Outdoor HD Camera to WeR@Home™
WeR@Home™ HD Camera User Guide 5
3. Adding the Outdoor HD Camera to WeR@Home™
Before you physically install an outdoor HD camera, add the camera to WeR@Home™.
To add an outdoor HD camera to WeR@Home™:
1. Connect the power cable to the camera and a power source. As an option, you can power the
camera with the network cable using a PoE injector. A PoE injector may not be included with the
camera.
2. Connect a network cable to the HD camera and your internet router. Make sure to connect the
camera to the router of the Wi-Fi network that your mobile device is connected to.
3. Open the WeR@Home™ app on your mobile device.
4. Tap . The main menu appears.
5. Tap DEVICES. The DEVICES screen appears.
6. Tap . The Add New Devices screen appears displaying the available device types.
7. Select HD Camera. The HD Cameras screen appears displaying the list of HD cameras on your
network.
8. Tap the HD camera you want to add. The Pairing screen appears as the device scan begins. The
pairing process allows the HD camera to communicate with the hub.
When pairing succeeds, a window appears prompting you to enter the HD camera name.
9. Enter a name for the HD camera and/or location and tap Done.
Installing the Indoor HD Camera
6 WeR@Home™ HD Camera User Guide
4. Installing the Indoor HD Camera
You can mount the HD indoor camera on a table, or on a wall or ceiling. Before you install, make sure
to add the HD camera to WeR@Home™, refer to Chapter 2 on page 4.
To install the indoor HD camera on a table:
1. Place the camera in the location you want.
2. Loosen the adjustment knob. Move the camera to the position you want. Tighten the adjustment
knob.
3. Connect the power cable.
To install the indoor HD camera on a wall or ceiling:
1. Prepare the following equipment:
A drill with an appropriate bit
A Philips screwdriver
2. Select a location based on the following guidelines:
Clean, dry, smooth surface that can support the weight of the camera.
Near a power outlet
Not exposed to direct sunlight
Not in greasy and humid locations, like a kitchen
Not in locations with extreme temperatures
3. Apply the installation template onto the ceiling or wall where you want to install.
4. Drill holes according to the installation template.
5. If you are using wall anchors, insert them into the holes.
Installing the Indoor HD Camera
WeR@Home™ HD Camera User Guide 7
6. Screw the camera into place.
Figure 4 – Installing the Indoor HD Camera
7. Loosen the adjustment knob. Move the camera to the position you want. Tighten the adjustment
knob.
8. Connect the power cable.
Installation Template
Adjustment Knob
Installing the Outdoor HD Camera
8 WeR@Home™ HD Camera User Guide
5. Installing the Outdoor HD Camera
You can mount the outdoor HD camera on a ceiling or a wall. Before you install, make sure to add the
HD camera to WeR@Home™, refer to Chapter 2 on page 4.
To install the outdoor HD camera:
1. Prepare the following equipment:
A drill with an appropriate bit
A Philips screwdriver
Network cable to attach the network camera to your LAN
Optional: A PoE injector. A PoE injector provides power to the camera over the network
connection and may not be included with the camera.
2. Select a location based on the following guidelines:
Clean, dry, smooth surface that can support the weight of the camera.
Near a LAN cable connected to your internet router
Not exposed to direct sunlight
Not in locations with extreme temperatures
3. Apply the installation template onto the ceiling or wall where you want to install.
4. Drill holes according to the installation template.
5. If you are using wall anchors, insert them into the holes.
6. Screw the camera into place.
Figure 5 – Installing the Outdoor HD Camera
Installing the Outdoor HD Camera
WeR@Home™ HD Camera User Guide 9
7. Loosen the adjustment screws. Move the camera into the position you want. Tighten the
adjustment screws.
Figure 6 – Adjustment Screws
8. Connect the power cable. As an option you can power the camera with the network cable using a
PoE injector. A PoE injector may not be included with the camera.
9. Connect a network cable to the HD camera.
Adjustment Screws
Configuring the HD Camera
10 WeR@Home™ HD Camera User Guide
6. Configuring the HD Camera
You can configure the HD cameras in your WeR@Home™ as follows:
Change the HD camera name
Select a Wi-Fi network
Start an HD camera firmware upgrade
Enable or disable video transmission between the HD camera and the WeR@Home™ server.
To view live video, enable. To reduce network traffic, disable.
To configure an HD camera:
1. Tap . The main menu appears.
2. Tap DEVICES. The Devices screen appears.
3. Tap for the device you want to configure.
4. Make your changes.
5. Tap ACCEPT.
Inhaltsverzeichnis
Andere Essence IP-Kamera Handbücher
