ETC ColorSource Spot Bedienungsanleitung

ETC Installation Manual

ColorSource®Spot

ColorSource Spot Page 1 of 12 Electronic Theatre Controls, Inc.

Corporate Headquarters



Middleton, Wisconsin, USA



Tel +608 831 4116



Service: (Americas) [email protected]

London, UK



Tel +44 (0)20 8896 1000



Service: (UK)

[email protected]

Rome, IT



Tel +39 (06) 32 111 683



Service: (UK) [email protected]

Holzkirchen, DE



Tel +49 (80 24) 47 00-0



Service: (DE) [email protected]

Hong Kong



Tel +852 2799 1220



Service: (Asia)

[email protected]

Web:

www.etcconnect.com



Product information and specifications subject to change

US Patent No. 7,901,089 . 8,403,523 . 8,384,294 . 8,633,649 . 6,020,110,157,302 . 2,638,781 . 8,878,455 . 9,041,308

8,723,450 . 8,593,074



EU Patent No. 2,150,746



All other patents pending

7413M2100



Rev D



Released 2016-07



ETC intends this document to be provided in its entirety.

Overview

The ColorSource Spot is an affordable profile fixture that offers the quality and

support of an ETC LED fixture. Utilizing an RGB-L color mixing system, the

ColorSource Spot produces amazing color and output for a four-color fixture.

This fixture is available in both original and Deep Blue variants. The Deep Blue

uses an array that offers richer, more saturated blues and stronger magentas

in exchange for the more jewel-toned blues like sky or turquoise. For more

information, see the ETC website at www.etcconnect.com.

This light engine can be used with standard ETC shutter barrels, lens tubes,

Fresnel and Cyc Adapters, and accessories.

Environment

The ColorSource Spot operates in ambient temperatures of 0°–40°C and

comes with a variable-speed, quiet operation fan.

CAUTION:

• Risk of eye injury. Do not stare directly into the light.

• Do not operate in proximity to flammable materials.

Note:

The ColorSource Spot is for use in dry locations only.

Note:

• Maximum recommended ambient operating temperature:

Ta = 40°C (104°F)

• Maximum anticipated external surface temperature at 40°C

ambient: Tmax = 80°C (176°F)

• External temperatures after 5 minutes of full-brightness

operation at 25°C (77°F) ambient: 30°C (86°F)

• External Temperature (steady state achieved) at 25°C

(77°F): 36°C (97°F)

ETC Installation Manual

ColorSource Spot

ColorSource Spot Page 2 of 12 Electronic Theatre Controls, Inc.

Electrical

• Operates between 100V and 240VAC at a frequency of 50/60Hz.

• Maximum power consumption is 185W.

• Up to 9 luminaires (15A max) may be linked via power thru connector

(10 luminaires total per circuit) when used with an R20 relay module or

Unison Echo®Relay Panel. Consult breaker trip curves when used with

other equipment. Requires power from a non-dimmable source.

Typical power consumption

Installation

Installing a shutter barrel

The ColorSouce Spot can be

purchased with or without a

shutter barrel. To install a

shutter barrel you will need a

#2 Phillips screwdriver (not

provided).

The ColorSource light engine

includes a barrel screw. The

small screw used to secure the

top of the shutter barrel is

included with the shutter barrel.

Step 1: Align the barrel to the front of the ColorSource Spot and

rotate it one quarter turn counter-clockwise.

Step 2: Insert the shutter barrel into the front of the light engine and

rotate clockwise until it is fully threaded onto the light engine.

Step 3: Insert the barrel screw at the bottom of the light engine and

tighten.

Step 4: Insert the small screw into the top of the light engine and

tighten using the Phillips screwdriver.

WARNING:

Disconnect the fixture from power and DMX and

allow it to cool before performing any cleaning and

maintenance.

100V 120V 240V

Idle Power / Current 1.19W / 0.0465A 2.07W / 0.0479A 1.5W / 0.0531A

Direct at Full / Current 168W / 1.69A 166W / 1.39A 166W / 0.72A

Small screw (included

with shutter barrel)

Light engine

ETC Installation Manual

ColorSource Spot

ColorSource Spot Page 3 of 12 Electronic Theatre Controls, Inc.

Mounting hardware

• The ColorSource Spot ships with a standard yoke for mounting with a

c-clamp.

• The provided safety cable (or other approved safety device) must be

attached to the fixture. Two attachment loops are provided on the rear

of the fixture body. Take care to leave as little slack as possible in the

safety cable to avoid catching the yoke of the fixture.

Connectors

•Power: Two powerCON®connectors for power in and thru

•Data (DMX512/RDM): Two five-pin XLR connectors OR two RJ45

connectors for data in and thru

Conversion cables are available from ETC. Please contact your ETC

customer service representative and request part number W6538 for

RJ45 to female XLR or part number W6539 for RJ45 to male XLR.

Setting up the fixture

Step 1: Plug power cord into the powerCON In connector on the rear

of the fixture.

Step 2: Make any power-thru cable connections prior to applying a

power source.

Step 3: Plug power cord into power source.

Powering up

Step 1: Press the Mode button once to wake the display. The display

shows the DMX address.

Step 2: Press the Mode button a second time to access the

Presets/Sequences menu.

Note:

This fixture is not Ethernet/data network compatible.

Note:

The ColorSource Spot is not self terminating. You must

terminate the last fixture in line with a 120 ohm resistor.

XLR terminators are not available from ETC.

To purchase an RJ45 terminator, please contact your ETC

customer service representative and request part number

N4086.

ETC Installation Manual

ColorSource Spot

ColorSource Spot Page 4 of 12 Electronic Theatre Controls, Inc.

Adjusting the tilt

The fixture can be tilted up and down and rotated (panned) as needed.

Step 1: Loosen, but do not remove the yoke locking knobs.

Step 2: Tilt the fixture to the desired angle.

Step 3: Tighten the yoke locking knobs.

User interface

The user interface allows you to set the start address of the fixture, and access

the stand-alone presets and sequences. After five seconds of inactivity, the

display goes dark.

Mode button

Pressing the Mode button activates the Preset/Sequence selection menu; the

last active preset or sequence plays automatically. Pressing the Mode button a

second time deactivates the selected preset or sequence. The display will revert

to show the DMX start address.

• If DMX data is present, the current preset or sequence plays in the

background and DMX data continues to take priority.

• If DMX data is lost and a preset is active in the background, the last

selected preset or sequence automatically plays.

Setting the DMX address

Step 1: Press the Mode button until the DMX address is displayed.

Step 2: Use the Up and Down buttons to select the DMX address for

the fixture.

ETC Installation Manual

ColorSource Spot

ColorSource Spot Page 5 of 12 Electronic Theatre Controls, Inc.

Setting presets and sequences

There are twelve factory-configured presets followed by five factory-

configured sequences built into the fixture. From the Preset/Sequence menu,

press the Up and Down buttons to scroll through the list. The sequence or

preset plays immediately upon selection. All presets and sequences can be re-

recorded through an RDM device.

To re-record presets:

Step 1: Using DMX or RDM, set the desired RGB levels.

Step 2: Press the Mode button to access the Preset/Sequence menu.

Step 3: Using the Up and Down buttons, navigate to the preset

number you want to re-record.

Step 4: Hold the Mode button for three seconds to confirm the preset

selection. The user interface will show a three second count-

down. The preset number will then blink once to confirm the

preset has been recorded.

Power in

Data in

Down

Data thru

Power

thru

User

interface

DMX address

screen:

Preset/Sequence

screen:

Scroll through

presets ,

followed by

sequences 

Mode

button

Spot with XLR

connectors shown

Safety cable

attachment

point

ETC Installation Manual

ColorSource Spot

ColorSource Spot Page 6 of 12 Electronic Theatre Controls, Inc.

It is possible to activate a known preset or sequence from a connected fixture

when DMX is not present. If a connected fixture activates a preset or sequence

that is not recognized by the Spot fixture, the Spot fixture will hold its last look.

When DMX is restored, the DMX takes priority.

Pre-configured presets

Pre-configured sequences

Adjusting the intensity of presets

Step 1: Ensure that DMX data is not present.

Step 2: Press the Mode button to access the Preset/Sequence menu,

and then press the Up and Down buttons to select the preset

that you want to edit.

Step 3: Hold the Mode button for 3 seconds. The display shows : ##

where the number is an intensity level from , or .

Step 4: Press the Up and Down buttons to change the intensity level

of the preset in real time.

Step 5: Press the Mode button to confirm your selection and return to

the Preset/Sequence menu.

The fixture will automatically return to the Preset/Sequence menu after

5 seconds of inactivity without saving edits to the preset intensity. This cancels

unsaved changes.

Preset Name Preset Name

1 3200K White 7 Magenta

2 5600K White 8 Yellow

3Red9Orange

4 Green 10 Light Yellow

5 Blue 11 Light Blue

6Cyan12LightPink

Sequence Name

1 Rainbow Fast

2 Rainbow Slow

3WarmColorsFast

4 Cool Colors Fast

5Random

ETC Installation Manual

ColorSource Spot

ColorSource Spot Page 7 of 12 Electronic Theatre Controls, Inc.

Changing the DMX control mode

You can set the DMX control mode for the fixture to one of four available

mode options.

Step 1: Press the Mode button until the DMX address is displayed.

Step 2: Hold the Mode button for 3 seconds. The display shows the

current DMX control mode.

Step 3: Press the Up and Down buttons to change the DMX control

mode.

•: 5-channel mode (intensity, red, green, blue, and

strobe)

•: Direct emitter control (intensity, red, green, blue,

lime, and s”trobe)

•: Single-channel mode controls the intensity of

preset 1 (defaults to 3200K White)

•: RGB mode (red, green, and blue)

Step 4: Press the Mode button to confirm your selection.

The fixture will automatically return to the DMX address after 5 seconds of

inactivity without saving edits to the DMX control mode. This cancels unsaved

changes.

DMX control channels

*Original ColorSource Spot fixture uses blue in channel 4; Deep Blue ColorSource Spot

fixture uses indigo in channel 4.

DMX

Channel



(5 Channel)



(Direct)



(1 Channel)



(RGB)

1 Intensity Intensity Intensity Red

2Red Red Green

3GreenGreen Blue

4 Blue Blue/Indigo*

5 Strobe Lime

6Strobe

ETC Installation Manual

ColorSource Spot

ColorSource Spot Page 8 of 12 Electronic Theatre Controls, Inc.

Locking the user interface

After you have set up the fixture, you can lock the user interface to prevent

additional changes.

Step 1: Hold the Up and Down buttons simultaneously for 3 seconds.

The display will show  to indicate that the user interface

is locked.

Step 2: To unlock the user interface, hold the Up and Down buttons

simultaneously for 3 seconds.

Updating the fixture software

ETC recommends using UpdaterAtor software to manage software updates.

For more information on UpdaterAtor, see the UpdaterAtor Software Quick

Guide,which you can download for free from www.etcconnect.com.

When you add a ColorSource fixture running a newer software version or

update a ColorSource fixture to a newer software version using UpdaterAtor,

you can use that fixture to push the newer software version to all connected

ColorSource fixtures.

You can push newer software versions from a connected fixture only on

ColorSource fixtures running software v1.3.0 or newer. Use UpdaterAtor to

update individual fixtures running versions older than v1.3.0.

Step 1: Remove power and DMX from the master fixture that is

running the software version that you want to push to other

fixtures.

Step 2: Hold the Up and Down buttons simultaneously while restoring

power.

Step 3: The display will show  to indicate the update mode

is selected.

Step 4: Press the Mode button to start the update process.

• The display will alternate between  and the

percentage complete while updating.

• The master fixture will reboot once the update is

complete.

Restoring factory defaults

Hold all three buttons (Mode, Up, and Down) simultaneously for five seconds.

The DMX start address will blink once to confirm that defaults have been

restored.

ETC Installation Manual

ColorSource Spot

ColorSource Spot Page 9 of 12 Electronic Theatre Controls, Inc.

Error codes

There are three error codes that may be shown on the user interface.

•: Screen toggles between and to indicate a problem

with the color calibration. The fixture will need to be returned to the ETC

factory; contact your local dealer to set up a repair.

•: Screen toggles between and   to indicate that the fixture

has gone into over-temperature protection mode to avoid damaging

the fixture. Once the fixture has self-cooled, the error will automatically

clear.

•: Screen toggles between and to indicate that the

upgraded fixtures have a software issue. Reload software to clear the

error. If the error persists, contact ETC.

RDM values

Parameter Value Description

Manufacturer ID 0x6574 Electronic Theatre Controls

Model ID 0x0205 ETC ColorSource Spot

0x0206 ETC ColorSource Spot Deep Blue

Personality ID

15Channel

2Direct

31Channel

4RGB

ETC Installation Manual

ColorSource Spot

ColorSource Spot Page 10 of 12 Electronic Theatre Controls, Inc.

Andere Handbücher für ColorSource Spot

Inhaltsverzeichnis

Andere ETC DJ-Equipment Handbücher

ETC

ETC ColorSource Fresnel V Bedienungsanleitung

ETC

ETC Desire series Bedienungsanleitung

ETC

ETC Source Four Zoom Bedienungsanleitung

ETC

ETC Source Four XT HID Zoom Bedienungsanleitung

ETC

ETC Source 4WRD Bedienungsanleitung

ETC

ETC Source Four Zoom CE Bedienungsanleitung

ETC

ETC ColorSource PAR Bedienungsanleitung

ETC

ETC Prodigy FlyPipe Studio Bedienungsanleitung

ETC

ETC ColorSource Linear Bedienungsanleitung

ETC

ETC Element Bedienungsanleitung

ETC

ETC Source Four jr Bedienungsanleitung

ETC

ETC Source 4WRD Bedienungsanleitung

ETC

ETC Source 4WRD Bedienungsanleitung

ETC

ETC Desire series Konfigurationshandbuch

ETC

ETC Irideon WLZ Bedienungsanleitung

ETC

ETC Congo jr Master Playback Wing Bedienungsanleitung

ETC

ETC Source Four LED Series Bedienungsanleitung

ETC

ETC Desire series Bedienungsanleitung

ETC

ETC Source 4WRD Bedienungsanleitung

ETC

ETC IRIDEON AR500 Bedienungsanleitung

ETC

ETC ColorSource CYC Bedienungsanleitung

ETC

ETC Source 4WRD II Bedienungsanleitung

ETC

ETC ColorSource PAR v1.7 Bedienungsanleitung

ETC

ETC Ion Classic Bedienungsanleitung

Beliebte DJ-Equipment Handbücher anderer Marken

ALPHA LITE

ALPHA LITE ALPHA 1500 Betriebsanleitung

Chauvet

Chauvet OVATION E-930VW Bedienungsanleitung

Snow Masters

Snow Masters Zig Oscillator Bedienungsanleitung

EuroLite

EuroLite 50530554 Bedienungsanleitung

Beamz

Beamz BUV243 Bedienungsanleitung

thomann

thomann Stairville DJ Lase 40-G MK-III Bedienungsanleitung

Eagletone

Eagletone 6 Eyes Flower Bedienungsanleitung

EuroLite

EuroLite FLD-1508 Bedienungsanleitung

Technical Pro

Technical Pro LG8xSEA Bedienungsanleitung

JB Systems

JB Systems Lounge Laser DMX Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Halo 90 Bedienungsanleitung

Elation

Elation FUZE WASH Z350 Bedienungsanleitung

Maverick

Maverick MK3 WASH Bedienungsanleitung

Infinity

Infinity TF-260C7 Fresnel Bedienungsanleitung

Chauvet

Chauvet EVE E-50Z Bedienungsanleitung

Eliminator Lighting

Eliminator Lighting E 138 Bedienungsanleitung

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Bedienungsanleitung

KAM

KAM DMX Laser80 FScan Bedienungsanleitung