ETC Echo Echoflex Interface Bedienungsanleitung

How Do I Configure the Echo Echoflex Interface?

Question

The Echo Echoflex Interface (EEI) has a lot of buttons and options, how do I go about setting it up and making sure it

works?

Answer

As explained in another article, What Does the Echo Echoflex Interface Do?, the heart of this device is to set up

communication between Echo and Echoflex systems. While the installation guide goes into complete detail regarding

how to set up this device, below is a quick breakdown of the main setup and control options.

Steps/Controls

Configure the Echo Side

1. Assign Echo space via dial

2. Program which presets/zones the inputs/outputs talk to

a. Press and hold ‘RECORD/PROGRAM’ button for 3 seconds to enter program mode

b. Tap ‘SELECT’ button to navigate to desired input/output

c. Output Status LEDs will indicate preset/zone number for the selected input/output

d. Tap ‘ON’ and ‘OFF’ buttons to increase preset or zone number

e. Tap ‘RECORD/PROGRAM’ button to save changes and exit program mode

Configure the Echoflex Side

1. Link inputs (learn EEI to Echoflex input devices [stations/sensors])

a. Tap ‘SELECT’ button to choose desired input

b. Tap ‘LEARN/TEACH’ button on EEI to put the EEI in LEARN mode

https://support.etcconnect.com/ETC/Architectural/Aero_and_EchoFlex/Aero_and_Echoflex_Gateways_and_Interfaces/How_…

Updated: Fri, 17 Sep 2021 16:17:12 GMT

c. Use appropriate TEACH option on Echoflex input device to link

d. Repeat for other inputs or learn mode on EEI will expire after 30 seconds of inactivity

2. Link outputs (teach EEI to Echoflex output devices [controllers])

a. Tap ‘SELECT’ button to choose desired output

b. Put Echoflex output device into learn mode

c. Tap ‘LEARN/TEACH’ button on EEI to teach/link to the device

d. Repeat for other outputs or learn mode on output device will expire after 30 seconds of inactivity

3. Clear all links for an input/output

a. Tap ‘SELECT’ button to choose desired input/output

b. Press and hold ‘CLEAR’ button for 5 seconds

Manual Control (make sure the EEI can communicate to both sides)

1. Of wireless inputs

a. Tap ‘SELECT’ button to choose desired input

b. Use ‘ON’ and ‘OFF’ buttons to simulate on event action and off event action

I. Ex A: If echoflex switch station linked to the input, single tap plays programmed preset or space off,

while pressing and holding performs space raise or lower

II. See install guide for full list of actions

2. Of wireless outputs

a. Tap ‘SELECT’ button to choose desired output

b. Use ‘ON’ and ‘OFF’ buttons to increase/decrease the linked output device’s level

I. Single tap sets output to 100% or 0% over 2 seconds

II. Pressing and holding raises or lowers output level

III. Double tap sets output to 100% or 0% over 500 ms

Re-record Echo Presets

https://support.etcconnect.com/ETC/Architectural/Aero_and_EchoFlex/Aero_and_Echoflex_Gateways_and_Interfaces/How_…

Updated: Fri, 17 Sep 2021 16:17:12 GMT

1. Set the desired look

2. Tap ‘SELECT’ button to choose desired input

3. Tap ‘RECORD/PROGRAM’ briefly to snapshot current look

Related Links/References

•What Does the Echo Echoflex Interface Do?

•Echo Echoflex Interface Installation and Programming Manual

https://support.etcconnect.com/ETC/Architectural/Aero_and_EchoFlex/Aero_and_Echoflex_Gateways_and_Interfaces/How_…

Updated: Fri, 17 Sep 2021 16:17:12 GMT

Inhaltsverzeichnis

Andere ETC Aufnahmegeräte Handbücher

ETC

ETC Echo Contact Input Bedienungsanleitung

ETC

ETC Net3 Conductor Bedienungsanleitung

ETC

ETC Unison AV/Serial Interface v1.0.0 Bedienungsanleitung

ETC

ETC Unison Echo Bedienungsanleitung

ETC

ETC Unison Echo-Echoflex Bedienungsanleitung

ETC

ETC Echo-Echoflex Interface Bedienungsanleitung

ETC

ETC CueSystem Bedienungsanleitung

ETC

ETC Echo Integration Interface Bedienungsanleitung

ETC

ETC EchoAccess Bedienungsanleitung

ETC

ETC Unison AV/Serial Interface v1.1.0 Bedienungsanleitung

ETC

ETC Paradigm P-TSI Handbuch

ETC

ETC Echoflex Elaho Contact Bedienungsanleitung

ETC

ETC PARADIGM Einrichtungshandbuch

ETC

ETC Echoflex Elaho Bedienungsanleitung

ETC

ETC Gadget Bedienungsanleitung

ETC

ETC SmartPack Bedienungsanleitung

Beliebte Aufnahmegeräte Handbücher anderer Marken

KV2 Audio

KV2 Audio 500 Series Bedienungsanleitung

Robotics Technologies

Robotics Technologies microBus-Cam II Bedienungsanleitung

Seca

Seca 460 Bedienungsanleitung

Cognex

Cognex MVS-8000 Series Bedienungsanleitung

Mect

Mect MPNC006 Series Bedienungsanleitung

Bad Caf

Bad Caf THE LEASH Bedienungsanleitung

Strymon

Strymon NIGHTSKY Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Bedienungsanleitung

Tews Technologies

Tews Technologies TPMC465 Bedienungsanleitung

Honeywell

Honeywell Excel 50 Bedienungsanleitung

SeaLevel

SeaLevel COMM+8.LPCI Bedienungsanleitung

Arturia

Arturia AUDIOFUSE STUDIO Bedienungsanleitung

Rukra

Rukra RK-1240 Bedienungsanleitung

Samson

Samson SCOM Bedienungsanleitung

Dynacord

Dynacord DPS260 Bedienungsanleitung

Nice

Nice Core Bedienungsanleitung

Pyle Pro

Pyle Pro PSS8 Bedienungsanleitung

RF-System

RF-System TinyGate Gebrauchs- und Pflegehandbuch