ETC SmartPack Bedienungsanleitung

SmartPack User Interface

The SmartPack family user interface and menu structure provide users an intuitive easy setup with multiple language

options built-in.

Use the Standby/Control power switch to start up and shut down operation of the SmartPack. When the breaker is in the

“On” position, the blue Power LED is illuminated indicating the power is on.

WARNING:

When the Standby/Control power switch is in the “Off” position, the unit is still connected to the

power supply. When working on exposed load circuit wiring the load cables must be unplugged or

the unit disconnected from the power supply.

The green DMX LED indicates a DMX signal. When no DMX signal is present, the green LED will flash. When a stable

DMX control signal is present the green LED will illuminate fully.

LCD

The display is a high contrast 20-character by two line backlit LCD. The control symbol, indicated in the top right corner

of the LCD, indicates the current control source.

https://support.etcconnect.com/ETC/Power_Controls/Smart_Family/SmartPack_and_SmartSwitch/SmartPack_User_Manual/…

Updated: Tue, 14 Sep 2021 15:42:05 GMT

Note:

If you discover a blinking “C” in the top corner of the LCD, one or more of the power cubes has

exceeded the maximum operating temperature of 90° Celsius. When you have corrected the

temperature problem, the error should clear. If the error persists, contact ETC Technical Services

for assistance.

When configuring the SmartPack:

• Characters or [TEXT] in brackets indicate an item can be selected

• Characters or >Text< in angle brackets indicate an item is selected

Adjusting the Contrast of the LCD Display

Press and hold << and use the + and - buttons to adjust the contrast of the LCD display.

Initial Power Up Display

The first time you apply power to the SmartPack you will be asked to choose a language for the operating system. The

language options will cycle through the following four options at three second intervals.

Menu Lockout

The menu lockout function restricts users from performing any changes to the current operation of the SmartPack from

the facepanel. When lockout is enabled the emergency contact input, SmartLink station control, and incoming DMX

levels will still affect change in the output level of the Smartpack dimmers. Set levels from the test menu prior to

engaging lockout will be held until lockout has been disengaged.

To engage menu lockout:

Press and hold + and - buttons for a period of 5 seconds.

https://support.etcconnect.com/ETC/Power_Controls/Smart_Family/SmartPack_and_SmartSwitch/SmartPack_User_Manual/…

Updated: Tue, 14 Sep 2021 15:42:05 GMT

• When lockout is on, all local controls are disabled. If a user

interface button press is received, the unit will display a lockout

dialog for three seconds then return to the main status display.

To disengage menu lockout:

Press and hold + and - buttons for a period of 5 seconds. The display returns to the main status display and all controls

function normally.

Circuit Mode Selection Switches (for SmartPacks with ThruPower)

ThruPower Relay

Each circuit has a dedicated, three-position switch that sets the circuit to Dimmable,Relay, or Hot Power (constant

circuit).

ThruPower Switch (CE only)

Each circuit has a dedicated, two-position switch that sets the circuit to Dimmable or Hot Power (constant circuit).

https://support.etcconnect.com/ETC/Power_Controls/Smart_Family/SmartPack_and_SmartSwitch/SmartPack_User_Manual/…

Updated: Tue, 14 Sep 2021 15:42:05 GMT

Andere Handbücher für SmartPack

Inhaltsverzeichnis

Andere ETC Aufnahmegeräte Handbücher

ETC

ETC Echoflex Elaho Contact Bedienungsanleitung

ETC

ETC Gadget Bedienungsanleitung

ETC

ETC Unison AV/Serial Interface v1.1.0 Bedienungsanleitung

ETC

ETC Echo-Echoflex Interface Bedienungsanleitung

ETC

ETC Echo Integration Interface Bedienungsanleitung

ETC

ETC Unison Echo-Echoflex Bedienungsanleitung

ETC

ETC PARADIGM Einrichtungshandbuch

ETC

ETC Unison Echo Bedienungsanleitung

ETC

ETC Echo Contact Input Bedienungsanleitung

ETC

ETC Paradigm P-TSI Handbuch

ETC

ETC Net3 Conductor Bedienungsanleitung

ETC

ETC EchoAccess Bedienungsanleitung

ETC

ETC Echo Echoflex Interface Bedienungsanleitung

ETC

ETC Echoflex Elaho Bedienungsanleitung

ETC

ETC CueSystem Bedienungsanleitung

ETC

ETC Unison AV/Serial Interface v1.0.0 Bedienungsanleitung

Beliebte Aufnahmegeräte Handbücher anderer Marken

KV2 Audio

KV2 Audio 500 Series Bedienungsanleitung

Robotics Technologies

Robotics Technologies microBus-Cam II Bedienungsanleitung

Seca

Seca 460 Bedienungsanleitung

Cognex

Cognex MVS-8000 Series Bedienungsanleitung

Mect

Mect MPNC006 Series Bedienungsanleitung

Bad Caf

Bad Caf THE LEASH Bedienungsanleitung

Strymon

Strymon NIGHTSKY Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Bedienungsanleitung

Tews Technologies

Tews Technologies TPMC465 Bedienungsanleitung

Honeywell

Honeywell Excel 50 Bedienungsanleitung

SeaLevel

SeaLevel COMM+8.LPCI Bedienungsanleitung

Arturia

Arturia AUDIOFUSE STUDIO Bedienungsanleitung

Rukra

Rukra RK-1240 Bedienungsanleitung

Samson

Samson SCOM Bedienungsanleitung

Dynacord

Dynacord DPS260 Bedienungsanleitung

Pyle Pro

Pyle Pro PSS8 Bedienungsanleitung

Nice

Nice Core Bedienungsanleitung

RF-System

RF-System TinyGate Gebrauchs- und Pflegehandbuch