EtherWAN EX33000 Series Bedienungsanleitung

W70G-NX33000Q2 Page 1

Installation Guide

EX33000 Series | Industrial Unmanaged Switch

1Unpacking

Open the carton and unpack the items. Your package

should include:

▪One EX33000 Switch

▪DIN rail mounting kit

If any items are missing or damaged, notify your

EtherWAN representative. If possible, save the carton

and packing material in case you need to ship or store

the switch in the future.

2Equipment Needed

▪Category 5 or better cable for RJ-45 ports

▪Appropriate fiber cable for fiber ports

3Select a Location

▪Installation: DIN rail. Place the device on the DIN

rail from above using the slot. Push the front of

the device toward the mounting surface until it

audibly snaps into place.

▪Choose a dry area with ambient temperature

between -10°C to +60°C (14°F to 140°F).

▪Keep away from heat sources, sunlight, warm air

exhausts, hot-air vents, and heaters.

▪Be sure there is adequate airflow.

4Connect to the Data Ports

Depending on the model, your switch can have the

following ports:

▪16 10/100Base-TX Ports

▪15 100Base-FX Port + 1 100BASE-FX port

▪14 100Base-FX Port + 2 100BASE-FX ports

5Connect Power

The switch has two pairs of power inputs:

▪A 12-48VDC terminal block

▪A 12VDC jack

Only one power input is required to operate the

switch. However, redundant power supply

functionality is supported.

Terminal Block

The switch provides two power inputs on a 12-48VDC

terminal block. The terminal block has 5 terminal

posts.

Description

Power 2

12-48VDC

−

Power Ground

Power 1

12-48VDC

−

Power Ground

Earth Ground

Relay Output

Rating

1A @ 24VDC

DC Jack

Description

Power 3

12VDC

Power Failure Alarm

A 2-pin terminal block is provided for power failure

detection. Do not connect a power source to these

pins.

The relay contact closes if:

▪Power 1 and Power 2 are both failed, but Power 3

is ON.

▪Power 3 is failed, but Power 1 and Power 2 are

both ON.

Power-Up Sequence

When the switch is powered up:

▪All Link/ACT LEDs blink momentarily.

▪The Power LED lights up and stays lit.

▪LEDs for every port connected to a device will

flash, as the switch conducts a brief Power On Self-

Test (POST).

W70G-NX33000Q2 Page 2

Installation Guide

EX33000 Series | Industrial Unmanaged Switch

6LED Indicators

LED

State

Indication

10/100Base-TX, 100Base-FX

LINK/ACT

Steady

Network connection

established

Flashing

Transmitting or receiving data

7DIN Rail Installation

DIN-Rail Assembly Startup, and Dismantling

▪Assembly: Place the Switch on the DIN rail from

above using the slot. Push the front of the Switch

toward the mounting surface until it audibly snaps

into place.

▪Startup: Connect the supply voltage to start up the

Switch via the terminal block.

▪Dismantling: Pull out the lower edge and then

remove the Switch from the DIN rail.

Manufacturer information:

EtherWAN Systems, Inc.

33F, No. 93, Sec. 1, Xintai 5th Rd., Xizhi Dist., New

Taipei City, 221 Taiwan

The full product manual can be downloaded from:

www.etherwan.com

Andere EtherWAN Schalten Handbücher

EtherWAN

EtherWAN EX76000 Series Bedienungsanleitung

EtherWAN

EtherWAN EX78900X Series Bedienungsanleitung

EtherWAN

EtherWAN EX78000 Series Bedienungsanleitung

EtherWAN

EtherWAN EX34000 Bedienungsanleitung

EtherWAN

EtherWAN EX41941 Bedienungsanleitung

EtherWAN

EtherWAN EX78900E Series Bedienungsanleitung

EtherWAN

EtherWAN EX43000 series Bedienungsanleitung

EtherWAN

EtherWAN EX72129A Bedienungsanleitung

EtherWAN

EtherWAN EX41941F Bedienungsanleitung

EtherWAN

EtherWAN EX17016 Bedienungsanleitung

EtherWAN

EtherWAN EX62000 Bedienungsanleitung

EtherWAN

EtherWAN EX83000 Bedienungsanleitung

EtherWAN

EtherWAN EX43000 series Bedienungsanleitung

EtherWAN

EtherWAN EX70900 Bedienungsanleitung

EtherWAN

EtherWAN TG103H Bedienungsanleitung

EtherWAN

EtherWAN EX95000 Series Bedienungsanleitung

EtherWAN

EtherWAN EX77900 Series Bedienungsanleitung

EtherWAN

EtherWAN EX42300 series Bedienungsanleitung

EtherWAN

EtherWAN EX17082 Bedienungsanleitung

EtherWAN

EtherWAN EG99000 Series Bedienungsanleitung

EtherWAN

EtherWAN EX19082 Bedienungsanleitung

EtherWAN

EtherWAN EX48000A Series Bedienungsanleitung

EtherWAN

EtherWAN EX32008 Series Bedienungsanleitung

EtherWAN

EtherWAN EX78000 Series Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung