ETIGER S3b Sim Secual Bedienungsanleitung

www.etiger.com

Quick Start Guide

S3b Sim Secual / S3b Sim Vid Secual

Settings

SIM PIN

Request a PIN code to

unlock the phone.

O

Control panel’s

SIM card

Disable the security of your control panel’s SIM card

The S3b control panel interacts with you thanks to a SIM card

(sold separately). Before inserting your SIM card in the control

panel, make sure the SIM security is o. To proceed, insert the

SIM card in a mobile phone, browse the settings of the phone

and make sure the SIM card is unlocked (the PIN code may by

required to unlock the SIM card).

A piece of advice

For your control panel’s SIM card, we advise you to choose a

plan with unlimited text and 1 or 2h voice.

SIM

Insert the SIM card in the control panel

Open the battery compartment at the back of your control

panel and insert the SIM card in the control panel’s SIM card

slot.

Attention

Insert the SIM card according to the shape of the SIM card

slot.

Turn the control panel on

Plug the AC adaptor to an AC socket. Plug the output

connector of the AC adaptor into the adaptor interface in

the battery compartment at the back of the control panel.

Turn the power switch to “ON” and put back the cover of the

battery compartment. The control panel is turning on.

Attention

Make sure you have inserted a SIM card in the control panel

before turning it on.

Mount the control panel on a wall

Screw the wall mount onto the wall where you wish to install

your control panel. Fix the control panel on the wall mount.

A piece of advice

Make sure the control panel is rmly xed on the wall mount.

Because of the tamper switch, the alarm rings out if the control

panel is separated from the wall mount.

Before mounting the control panel, make sure the GSM signal is

sucient: make a phone call to your control panel’s SIM card. Once

you are through, press 1234# and then 1on your phone. If this

operation arms your system, the GSM signal is sucient. If nothing

happens or if you go to voice mail, the GSM reception is not sucient.

0001

Blinks once every second: searching GSM network

Blinks once every two seconds: GSM reception is ready

Change the system language

Send “0001” by SMS to the control panel to set the system

language to English.

The control panel replies “Ok” as a conrmation.

Attention

Before sending the SMS, make sure the GSM reception is

ready. The reception is ready when the indicator blinks

once every two seconds.

SMS numbers:

1.0600112233

This step enables you to dene the phone number(s) to which an

SMS is sent when the alarm is triggered. Only stored numbers can

control and congure the system.

Send “6”by SMS to the phone number of the SIM card in the

control panel. The control panel replies with a SMS containing

every phone number registered.

Copy and paste this SMS and edit it so to add your phone

number(s). Then send the SMS back to the control panel.

The control panel replies “Ok” as a conrmation.

In compliance with European laws. This product is in compliance with the essential requirements

and other relevant provisions of Directive 1999/5/EC.

Manufactured in China.

Connect more accessories

On the control panel, type your access code (default code: 1234) followed

by the key : your control panel is now in Connection mode.

Within the next 15 seconds, trigger the accessory you wish to

connect (for a RFID tag, swipe it in front of the RFID reader of the

control panel). You hear one beep: the accessory is registered.

A piece of advice

Save time and register your accessories using the Connection

Assistant in the “Support” section of our website (www.etiger.com).

Change the access code

Do not forget to change your access code. To change your access

code, send “13” by SMS to the control panel.

Advanced setup

For more settings, please refer to the user manual of

the control panel, available for download on

www.etiger.com/eu/support

Advanced settings

Memo

by SMS

Arm the system 1

Disarm the system 0

Home Mode 2

System status 00

by phone call

Arm the system 1

Disarm the system

(stop the siren automatically) 0

Start audio surveillance

(stop the siren automatically) *

Start the conversation 3

Start the siren 9

Stop the siren 6

To enable the control by phone call, please refer to

the user manual available for download at

www.etiger.com

Memo

Detach it and keep it with you at all time

A piece of advice

Save time and use our Android and iOS apps to

interact with your control panel.

S3b-QSG-EN20151208-2.4-W

SIM card’s phone nb.

eTIGER Europe

18/C, Rue des Procureurs

7500 Tournai, Belgique

service@etiger.com

Andere Handbücher für S3b Sim Secual

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere eTIGER Sicherheitssystem Handbücher

eTIGER

eTIGER ES-D4A Bedienungsanleitung

eTIGER

eTIGER S3b Sim Secual Bedienungsanleitung

eTIGER

eTIGER ES-S7A Bedienungsanleitung

eTIGER

eTIGER Secual Box V2 Bedienungsanleitung

eTIGER

eTIGER S4 Combo Secual Bedienungsanleitung

eTIGER

eTIGER ES-D3B Bedienungsanleitung

eTIGER

eTIGER S4 Cell + Line Bedienungsanleitung

eTIGER

eTIGER ESB-WS2A Bedienungsanleitung

eTIGER

eTIGER secual box Bedienungsanleitung

eTIGER

eTIGER secual box Bedienungsanleitung

eTIGER

eTIGER ES-S7AU Bedienungsanleitung

eTIGER

eTIGER S4 Combo Secual Bedienungsanleitung

eTIGER

eTIGER ES-S6A Bedienungsanleitung

eTIGER

eTIGER S5 Bedienungsanleitung

eTIGER

eTIGER Secual Box V2 Bedienungsanleitung

eTIGER

eTIGER S3b Sim Secual Bedienerhandbuch

eTIGER

eTIGER ES-D3A Bedienungsanleitung

eTIGER

eTIGER S5 Bedienungsanleitung

eTIGER

eTIGER S3 Sim Secual Bedienungsanleitung

eTIGER

eTIGER S3b Sim Secual Bedienungsanleitung

eTIGER

eTIGER S3b Sim Secual Bedienerhandbuch

eTIGER

eTIGER S3b Bedienungsanleitung

eTIGER

eTIGER S4 Combo Secual Bedienungsanleitung

eTIGER

eTIGER S2 Bedienungsanleitung

Beliebte Sicherheitssystem Handbücher anderer Marken

Inner Range

Inner Range Concept 2000 Bedienungsanleitung

Climax

Climax Mobile Lite R32 Montageanleitung

CADDX

CADDX NX-6 Bedienungsanleitung

FBII

FBII XL-31 Series Bedienungsanleitung

Johnson Controls

Johnson Controls PENN Connected PC10 Bedienungsanleitung

Aeotec

Aeotec Siren Gen5 Bedienungsanleitung

Blaupunkt

Blaupunkt SA 2700 Bedienungsanleitung

IDEAL

IDEAL Accenta Betriebsanleitung

AJAX

AJAX DoubleButton Bedienungsanleitung

Swann

Swann SW-P-MC2 Bedienungsanleitung

Ecolink

Ecolink Siren+Chime Bedienungsanleitung

Digital Monitoring Products

Digital Monitoring Products XR150 Bedienungsanleitung

EDM

EDM Solution 6+6 Wireless-AE Bedienungsanleitung

Highway Safety Group

Highway Safety Group EA401 Bedienungsanleitung

Siren

Siren LED GSM Bedienungsanleitung

Detection Systems

Detection Systems 7090i Montageanleitung

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung

Siemens

Siemens FDM273 Bedienungsanleitung