ETS SM1-TRWCF Bedienungsanleitung

SM1-TRWCF Microphone Instructions

The SM1- is a high quality, 12VDC-24VDC powered, compact, tamper resistant, weather proof (IP55), surface mount,

omni-directional, pre-amplified microphone for use with DRVs, I/P cameras, etc. Note- the audio output of the SM1-

TRWCF is “line level” (0db).

SM1-TRWCF Microphone Placement

The SM1-TRWCF is designed for outdoor applications and can be mounted on any flat surface using the supplied tamper

resistant screws. Do not mount the microphone near air conditioning vents, light fixtures or electrical equipment. We

recommend pointing the microphone towards the ground so that water does not accumulate in the sound hole. The

SM1-TRWCF should be placed as close as possible to the subject of interest. The SM1-TRWCF is useable in the range of

3-25 feet but is dependent on the level of background noise in the area. Experimentation in the environment will determine

what distances work best.

Cable Run

Run a 22 gauge, stranded, two conductor shielded cable between the SM1-TRWCF microphone and the monitoring

device. Keep the cable run distance under 1,000 feet and away from AC power sources, light fixtures and electrical

equipment. Connect power to the + terminal, the audio signal to the “audio” terminal and ground to the – terminal. The

Ground of the power and audio signal must share a common ground for proper operation. See Figure 1 for connection

diagram.

Adjusting the SM1-TRWCF Gain

The SM1-TRWCF has an adjustable output level. The SM1-TRWCF is shipped with the gain set at midrange. If the sound

at the “head end” is distorted, rotate the control counter-clockwise. If the volume at the “head end” is too low, rotate the

control clockwise.

Figure 1.

Caution

It may be against the law to install this microphone kit in certain environments. It may also be against the law to record conversations of

the person(s) being monitored without their knowledge. It is the responsibility of the installation company and end-user to determine if

the application of this product is legal. These laws vary from state to state. If you are not informed on these matters, consult a qualified

attorney or contact the appropriate state agency. A sticker is provided with this kit for the applications where notification must be

posted.

Warranty

All ETS products carry a one year parts and labor warranty. This warranty does not cover damages as a result of misuse, improper

handling of the unit or exposure to extreme temperatures or moisture. At its discretion, ETS reserves the right to repair or replace this

unit under the conditions of the warranty. If you experience problems with your equipment call ETS at: 505-888-3923 to obtain a return

authorization number. Equipment requiring repair beyond the warranty period or units that have been damaged or are not covered

under the warranty can be repaired by ETS for a minimal cost under most conditions.

Made in the USA

Inhaltsverzeichnis

Beliebte Mikrofon Handbücher anderer Marken

IK Multimedia

IK Multimedia iRig Stream MIC PRO Bedienungsanleitung

DAPAudio

DAPAudio RM-101 Bedienungsanleitung

AKG

AKG CHM 21 Bedienungsanleitung

Sennheiser

Sennheiser evolution wireless series EM 100 Bedienungsanleitung

Sony

Sony C-48 Bedienungsanleitung

GIGAMEDIA

GIGAMEDIA GGM PAMICUHFG Bedienungsanleitung

Shure

Shure WH30TQG Bedienungsanleitung

auna PRO

auna PRO MIC-900 Bedienungsanleitung

AKG

AKG D 3800 Bedienungsanleitung

Shure

Shure KSM141 Bedienungsanleitung

MAIIN SOUND

MAIIN SOUND IIN style Bedienungsanleitung

Earthworks

Earthworks TC25 Bedienungsanleitung

Sennheiser

Sennheiser evolution D1 Bedienungsanleitung

Alesis

Alesis MicLink Wireless Bedienungsanleitung

DSPPA

DSPPA D6234 Bedienungsanleitung

Monacor

Monacor IMG STAGELINE ECM-300B Bedienungsanleitung

Ansr Audio

Ansr Audio Scan16 Bedienungsanleitung

Shure

Shure MXA710 Series Bedienungsanleitung