Euphonix MC Mix Bedienungsanleitung

QUICKSTART GUIDE

MUSIC | AUDIO POST | VIDEO | FILM

Document Revision: A

Artist Series

professional control surface

RECPLAYNEXT FF STOPPREVRTZ REW

SEL

END

BANK

HOME

WORKSTATION

APPLICATION

INSERTS

INPUT

BANK

NUDGE

MIXER

NUDGE

POWER

CHAN

FLIP

DYN

AUX

GROUP

PAN

MIX

BACK

TOP

SEL

MC MIX

CFG

PAGE

CFG

PAGE

AUTO

REC N

ASSIGN

SELY

AUTO

REC N

ASSIGN

SELY

AUTO

REC N

ASSIGN

SELY

AUTO

REC N

ASSIGN

SELY

AUTO

REC N

ASSIGN

SELY

AUTO

REC N

ASSIGN

SEL Y

AUTO

REC N

ASSIGN

SEL Y

AUTO

REC N

ASSIGN

SELY

SOLOSOLOSOLOSOLO ON ON ON ON SOLO ONSOLO ON SOLO ON SOLO ON

Knob Set navigation Fader navigationPower switch

Shift key Fader strips

Shift key

Knob Set selectors

Display Screens

professional control surface

Artist Series

QUICKSTART GUIDEINSTALLATION AND SETUP

1 Installation and Setup

Euphonix is dedicated to making your MC Mix experience enjoyable and trouble-free

so we will periodically update the following software and documentation:

•EuControl: This software runs your MC Mix and communicates to your audio/video appli-

cation. Always download the new version if prompted to do so when you launch EuControl.

•MC Mix User Guide (PDF): This is the complete user guide for your MC Mix.

•EuCon Application Setup Guide (PDF): The MC Mix supports many applications, each with a

slightly different setup procedure. This document includes supplementary instructions for

each application.

Before proceeding, download the latest versions from: www.euphonix.com/artist/support

Unpacking and Elevating the MC Mix

Unpack your MC Mix, power adapter, AC power cord, installation CD, Ethernet crossover

cable, and riser brackets from its box.

The MC Mix can be elevated or angled using small foldout legs on the bottom of the

unit or elevated and angled by attaching the larger riser brackets. Since either method

requires turning the MC Mix over, it is easier to do this before attaching any cables.

Turn it over and place it on a soft surface.

Pull out all four of the small foldout legs to moderately elevate the unit; pull out only

the back two to angle the unit towards you (Figure 1-1 left).

Figure 1-1 Foldout leg (left); riser bracket (right)

Two larger, detached riser brackets elevate and angle the unit more than the foldout

legs. Use moderate force to snap them into the bottom panel as shown in Figure 1-1.

NOTE: To remove the riser brackets, see the MC Mix User Guide.

Foldout

leg

Riser

bracket

professional control surface

Artist Series

QUICKSTART GUIDEINSTALLATION AND SETUP

Installation

1. Insert the installation CD into your Macintosh and follow the instructions to install the

software.

If prompted to download the most current version of EuControl, follow the onscreen

instructions.

EuControl will launch automatically and is running when this icon appears in your

menu bar.

Figure 1-2 Menu bar with EuControl icon

2. Shut down your Macintosh.

3. Plug one end of the AC power cord into the power adapter (Figure 1-3 left) and the other

into a power outlet.

Figure 1-3 Connecting the power adapter

4. Connect the DC output cable from the power adapter to DC In on the left side of the rear

panel (Figure 1-3 right).

5. Plug one end of the Ethernet crossover cable into the Ethernet jack (labeled with ) on

the rear panel of the MC Mix (Figure 1-4).

Figure 1-4 Ethernet cable and rear panel jack

EuControl

icon

DC In 15 V

FOOTSWITCH

power adapter

AC power cord

DC output

cable

Eucon

Ethernet

cable

professional control surface

Artist Series

QUICKSTART GUIDEINSTALLATION AND SETUP

6. Plug the other end of the Ethernet crossover cable into an open Ethernet jack on your

computer, router, or Ethernet switch (Figure 1-5).

An Ethernet router or switch is required to connect additional MC Mix units or to a local

area network. Note that connecting directly to the computer (Figure 1-5-right) may require

removing your Internet cable.

Figure 1-5 MC Mix connected to router (left) and directly to computer (right)

7. Turn on your router (if applicable), then turn on your Mac and wait until it finishes starting up.

8. Press and release the POWER switch on your MC Mix.

Look at the top-right of your screen and wait up to 60 seconds. A green icon in the

menu bar indicates correct installation.

If you did not see the green icon: If your Mac is pre-2002 and you are using an Ethernet

router or switch, you need to purchase a normal straight-through Ethernet cable (instead

of the crossover Ethernet cable supplied) from a computer store.

9. Launch your application and open a project (Logic, Cubase, Digital Performer, Pro Tools, etc.).

10. To setup your application to work with the MC Mix, refer to the EuCon Application Setup

Guide that you downloaded at the beginning of this section.

Logic users do not need this document because additional setup is not required.

professional control surface

Artist Series

QUICKSTART GUIDECOMMON TASKS

2 Common Tasks

If you completed the steps in Section 1: Installation and Setup, you are ready to start

learning about your MC Mix. We recommend performing these simple tutorials of

common tasks in the order presented.

Fader Strip

1. Press the MC Mix’s strip 1 fader SEL key (Figure 2-1).

The corresponding track is selected in your application.

2. Move the MC Mix’s strip 1 fader up and down.

You are now controlling the level of your application’s first track with your MC Mix. The

display at the top of strip 1 shows track information.

Figure 2-1 Strip 1 fader SEL key

3. When the MC Mix is first powered up, the PAN key is lit by default. If it is not press the PAN

key (Figure 2-1).

Each strip’s Soft Knob now controls pan for its application’s corresponding track.

INSERTS

INPUT

CHAN

FLIP

DYN

AUX

GROUP

PAN

MIX

CFG

PAGE

CFG

PAGE

AUTO

REC N

ASSIGN

SELY

SOLO ON

fader

SEL key

PAN

key

professional control surface

Artist Series

QUICKSTART GUIDECOMMON TASKS

4. Press the NUDGE Xkey to move all eight tracks over one strip (Figure 2-2).

If tracks 1–8 were assigned to strips 1–8, tracks 2–9 are now assigned to strips 1–8.

Figure 2-2 NUDGE and BANK keys

5. Press and hold the Shift key (Figure 2-3) and press the BANK Wkey (Figure 2-2) to restore

tracks 1–8 to strips 1–8.

The Shift key accesses the functions labeled in blue on the MC Mix, in this case the

HOME function.

For convenience, another Shift key is located at the bottom-right of the MC Mix.

Figure 2-3 Shift keys

6. Press the BANK Xkey to shift tracks over eight at a time (Figure 2-2).

If tracks 1–8 were assigned to strips 1–8, tracks 9–16 are now assigned to strips 1–8.

NUDGE Wand BANK Wkeys perform the same operations in the opposite direction.

Inserts

1. Add a plug-in on track 1 of your application.

2. If tracks 1–8 are not assigned to strips 1–8, press and hold the Shift key (Figure 2-3) and

press the BANK Wkey (Figure 2-2).

RECPLAY

END

BANK

HOME

BANK

NUDGE

MIXER

NUDGE

SEL

SOLO ON

MC MIX

Shift key Shift key

professional control surface

Artist Series

QUICKSTART GUIDECOMMON TASKS

3. Press the MC Mix’s strip 1 fader SEL key (Figure 2-4).

4. Press the CHAN key to enter channel mode (Figure 2-4).

Figure 2-4 Fader strip, INSERTS and CHAN keys

5. Press the INSERTS key (Figure 2-4).

The names of the plug-ins on that track spill across the display screens.

6. Press the Soft Knob (Figure 2-4) below the desired plug-in’s name to select it.

The Soft Knobs can be turned like a conventional knob and pressed like a switch to access

an additional function.

The parameters of that plug-in spill across the display screens.

7. Turn the Soft Knob below the desired parameter to adjust its value.

8. Press the PAGE keys to access more parameters (Figure 2-5).

Figure 2-5 BACK and PAGE keys

9. Press the BACK key to exit that plug-in (Figure 2-5).

10. Press the CHAN key to exit channel mode (Figure 2-4).

SEL

INSERTS

INPUT

CHAN

FLIP

DYN

AUX

GROUP

BACK

TOP

CFG

PAGE

CFG

PAGE

AUTO

REC N

ASSIGN

SELY

SOLO ON

INSERTS

fader

SEL key

Soft

Knob

key

CHAN

key

SEL

BACK

TOP

CFG

PAGE

CFG

PAGE

SOLO ON

SCHNELLSTART-ANLEITUNG

MUSIK | AUDIO POST | VIDEO | FILM

Dokument-Revision: A

Artist Series

professional control surface

RECPLAYNEXT FF STOPPREVRTZ REW

SEL

END

BANK

HOME

WORKSTATION

APPLICATION

INSERTS

INPUT

BANK

NUDGE

MIXER

NUDGE

POWER

CHAN

FLIP

DYN

AUX

GROUP

PAN

MIX

BACK

TOP

SEL

MC MIX

CFG

PAGE

CFG

PAGE

AUTO

REC N

ASSIGN

SELY

AUTO

REC N

ASSIGN

SELY

AUTO

REC N

ASSIGN

SELY

AUTO

REC N

ASSIGN

SELY

AUTO

REC N

ASSIGN

SELY

AUTO

REC N

ASSIGN

SEL Y

AUTO

REC N

ASSIGN

SEL Y

AUTO

REC N

ASSIGN

SELY

SOLOSOLOSOLOSOLO ON ON ON ON SOLO ONSOLO ON SOLO ON SOLO ON

Knob Set-Navigation Fader-NavigationPower-Schalter

Shift-Taste Fader-KanalzÐê¬

Shift-Taste

Knob Set-Wahltasten

Display-Bildschirme

Andere Handbücher für MC Mix

Inhaltsverzeichnis

Sprachen:

Andere Euphonix Musikmixer Handbücher

Euphonix

Euphonix MixView CS3000 Bedienungsanleitung

Euphonix

Euphonix System 5 Bedienungsanleitung

Euphonix

Euphonix MixView CS3000 Kurzanleitung

Euphonix

Euphonix Max Air Control surface Bedienungsanleitung

Euphonix

Euphonix System 5 Bedienungsanleitung

Euphonix

Euphonix System 5B Bedienungsanleitung

Euphonix

Euphonix MC Mix Bedienungsanleitung

Euphonix

Euphonix Max Air Control surface Gebrauchs- und Wartungshandbuch

Euphonix

Euphonix MixView CS3000 Kurzanleitung

Euphonix

Euphonix Max Air Control surface Bedienungsanleitung

Euphonix

Euphonix EuCon Bedienungsanleitung

Euphonix

Euphonix System 5 Bedienungsanleitung

Euphonix

Euphonix System 5 Control Surface/Frame Bedienungsanleitung

Euphonix

Euphonix MC Mix Bedienungsanleitung

Euphonix

Euphonix System 5 Bedienungsanleitung

Euphonix

Euphonix System 5 Bedienungsanleitung

Euphonix

Euphonix R-1 Transfer Station Bedienungsanleitung

Euphonix

Euphonix MC Mix Bedienungsanleitung

Euphonix

Euphonix R-1 Transfer Station Bedienungsanleitung

Euphonix

Euphonix MC Mix Bedienungsanleitung

Euphonix

Euphonix System 5 Bedienungsanleitung

Beliebte Musikmixer Handbücher anderer Marken

Neve

Neve 8816 Bedienungsanleitung

Mackie

Mackie Onyx Analogue Mixer Bedienungsanleitung

Behringer

Behringer EUROPOWER PMP518M Bedienungsanleitung

Peavey

Peavey S-32 Sanctuary Series Bedienungsanleitung

Rane

Rane MP 4 Bedienungsanleitung

True

True T9 Touchscreen Console Bedienungsanleitung

Studiomaster

Studiomaster Air Pro 24 Bedienungsanleitung

Pioneer

Pioneer SVM 1000 - Audio/Video Mixer Bedienungsanleitung

Roland

Roland M-160 Bedienungsanleitung

Yamaha

Yamaha MR1642 Bedienungsanleitung

Ecler

Ecler MAC40v Bedienungsanleitung

Pioneer

Pioneer DJM 909 - Battle Mixer W/Effects Bedienungsanleitung

Veeder-Root

Veeder-Root TLS-350 Series Bedienungsanleitung

Alto

Alto APM80.QUAD Bedienungsanleitung

Omnitronic

Omnitronic PM-211 Bedienungsanleitung

SoundCraft

SoundCraft B400 Bedienungsanleitung

Roland

Roland SoundCanvas SC-8820 Bedienungsanleitung

CARVIN

CARVIN RX 1200 Bedienungsanleitung