EURA CEA-41C5 Bedienungsanleitung

CEA-41C5

High-Denition

PTZ Network Camera

User Manual

Table of contents

1. Device characteristic ............................................................................................................. 4

2. Device construction...............................................................................................................5

2.1. Installation method.........................................................................................................5

3. Device conguration ............................................................................................................ 6

3.1. Connection device .......................................................................................................... 6

3.2. Typical wiring diagram...................................................................................................7

3.3. Using Admin Tool congure the camera’s IP Address............................................. 8

4. Access to the device.............................................................................................................. 9

4.1. Access using WEB Browsers......................................................................................... 9

4.1.1. Logon....................................................................................................................... 9

4.1.2. Video plugin ........................................................................................................ 10

4.1.3. WEB Browser Interface ..................................................................................... 10

4.1.4. Connection, Snapshot and Recording............................................................. 11

4.1.5. Video Specication Adjustment.......................................................................12

4.1.6. PTZ Control...........................................................................................................12

4.1.7. Image Modes ........................................................................................................15

4.1.8. Video Replay ........................................................................................................16

4.1.9. Video Stream Parameter....................................................................................17

4.1.10. OSD.......................................................................................................................18

4.1.11. Motion Detection ...............................................................................................19

4.1.12. Advanced Functions.........................................................................................20

4.1.13. Device information........................................................................................... 23

4.1.14. Privacy mask...................................................................................................... 23

4.2. Access using RTPS Player........................................................................................... 24

4.3. Access using NVR......................................................................................................... 24

4.4. Access using Video Management Soware ........................................................... 25

5. Parameter Setting............................................................................................................... 25

5.1. Channel Parameter....................................................................................................... 26

5.1.1. Audio Parameter Setting itd. ............................................................................26

5.1.2. RS485 Parameters.............................................................................................. 26

5.1.3. Automatic cruise protection..............................................................................27

5.2. Network Parameters....................................................................................................27

5.2.1. Network Settings ................................................................................................27

5.2.2. RTPS Parameters ............................................................................................... 29

5.2.3. NTP Parameters ................................................................................................. 29

5.2.4. Heartbeat Setting..............................................................................................29

5.3. Recording Parameters ................................................................................................30

5.3.1. FTP Parameters...................................................................................................30

5.3.2. Snapshot Parameters ........................................................................................31

5.4. Alarm Settings...............................................................................................................31

5.4.1. Alarm Input...........................................................................................................31

5.4.2. Alarm Output...................................................................................................... 32

5.5. System Parameters ......................................................................................................33

5.5.1. User Management ...............................................................................................33

5.5.2. Advanced System Maintenance.......................................................................35

5.5.2.1. System Time ......................................................................................................35

5.5.2.2. Upgrading Soware Via WEB .......................................................................35

5.5.2.3. Saving Setting ................................................................................................. 36

5.5.2.4. Restoring Factory Defaults ...........................................................................37

5.5.2.5. Restart ...............................................................................................................37

5.5.2.6. Device Expanded Parameter.........................................................................37

5.6. Log view..........................................................................................................................37

5.7. Additional parameters..................................................................................................37

6. Technical parameters ......................................................................................................... 38

1. Device characteristic

Thanks for using our HD network Camera which is based on the standard H.264 Main Prole. It uses the

progressive scanning image transducer of mega pixels and its denition can meet the broadcast image quality. It

supports real-time dual-stream coding and its recording les can be decoded by standard decoders and played

by common player soware. The device doubles the quality of MPEG-4 with the same bit rate. To achieve the

same image quality, the bit rate is only half of that of MPEG-4. The product is easy to be operated and installed,

and can signicantly reduce the cost of wiring and construction and extend your CCTV network innitely.

Product Features:

•HDTV HD Vision

− HDTV performance, that supports full HD 1080P + Full D1 or SXGA + Full D1 dual-stream resolution, 16:9

aspect ratio and supports H.264 main prole in full frame rate.

•Zoom & AF

− Optical zoom and auto focus function, that not only can deliver best view distance but also can realizes

perfect auto focus.

•Low Code Stream + High Denition

− Perfect low code stream function, the video denition can reach to 720TVL when compress 720P video under

2~4Mbps,

− When compress 1.3MP video under 3~5Mbps, the video denition can reach to 800TVL,

− The video denition can reach to 1000TVL when compress 1080P video under 4~6Mbps.

•Stronger Intelligent Function

− Support WEB access to visit and congure the devices, support OSD, support real time video transmission,

support motion detection,

− Built in network code function, support ONVIF protocol,

− Support JPEG capture picture,unied client remote control monitoring soware and easy connect the brand

NVR,

− Ethernet 10/100 RJ45 auto adaptive, support RTSP/FTP/PPPOE/DHCP/DDNS/NTPS and so on network

protocol.

•PTZ Control

− Pan 360°, continuous rotation; Tilt 90°, no monitoring blind spot,

− Auto adjust PTZ speed according to the zoom function.

•Night vision

− Auto open infrared lamps according to the light,

− Auto adjust the brightness of infrared lamps based on the lens far or near.

− Adopt the forth infrared array light technology coordinate with intelligent dimming technology, better night

vision.

− Suitable for HD network monitoring occasions needing zoom control:

− Safe city large and medium concentration application, expressway, road and bridge, tunnel trac real-time

monitoring

−HD video conference

− Real-time night HD monitoring for nancial organizations, like banks

− 24-hour security monitoring HD network for factories and stadium

− Real-time remote monitoring for airport, school, plaza, etc.

− HD environment monitoring for forest and scenic region, etc.

−HD digital court monitoring application.

2. Device construction

Fig. 1. Dome Camera

2.1. Installation method

’L’ type speed dome camera installation method

Step 1- Draw positioning holes

Take out bracket from package box, mark the hole’s position on wall or ceiling based on mount bracket bottom

4pcs installation holes.

Step 2- Drill holes and put expansion screws in

Drill 4pcs expansion screw’s installation holes at pre-marked position, then put 4pcs expansion screws in.

Note: Please bring expansion screws own.

Fig. 2. Step 3

Step 3 - Lead cable through wall mount bracket

Lead the cable through wall mount bracket hole.

Fig. 3. Step 4

Step 4 - Connect speed dome camera and wall bracket.

Put speed dome camera connection port into the bracket hole and screw 4pcs hexagon screws into the corre-

sponding screw holes.

Fig. 4. Step 5

Step 5 - Fix the speed dome camera

Lead the cable out from the wiring port, then x it on the wall by using 4 screws. Seal the wiring port of the brac-

ket by using silicon sealant.

Step 6 - Cable connection

Please refer to section of six of this chapter- Connection method.

Step 7- Tear o protection lm

Tear o protection lm of transparent cover

Note: Please take care of the transparent cover.

3. Device conguration

3.1. Connection device

Connection method as below program, order to connect network cable, power supply cable(connect order based

on the keyboard model number, here just give one example). Details as below:

Fig. 5.

3.2. Typical wiring diagram

LAN Connection

Fig. 6.

WAN Connection

Fig. 7.

3.3. Using Admin Tool congure the camera’s IP Address

The system provides the management test tool – Admin Tool. Please check the system CD. The tool can:

1) Search network cameras or video servers in the network.

2) View serial number, name, IP, version, product model, port, and MAC address, etc.

3) Assign and setup IP and specify a management center in batch.

4) The status indicator can conrm the current network camera for restart and upgrade, etc.

Fig. 8.

Congure the IP address of the specied camera

Running the Admin Tool management tools automatically retrieve network camera device available in the

current network. Lists the MAC Address, IP Address, device name and other information; select a device and

double-click, the device information dialog box pops up, you can congure the device name, IP address, default

gate and other information.

Fig. 9.

Batch congure the IP address of the network camera

The Admin Tool management tools can use the same IP address each camera factory before being installed

in bulk conguration of multiple network cameras IP address.

These network cameras are connected to the same switch with the machine, through the Admin Tool quick

search network of devices, the mouse marquee multiple camera equipment, click the “batch Conguration”

button, the batch IP address conguration window pop-up. The user can set the starting IP address and ending

IP address and other content, bulk assign IP addresses to these network cameras, specify the subnet mask,

default gateway, port and center IP information. Meanwhile, we can use the tool to open the status indicator to

conrm which network camera is being tested, easy for putting on a label aer testing.

Fig. 10.

4. Access to the device

4.1. Access using WEB Browsers

4.1.1. Logon

Fill in the IP address of the network camera into the URL of your WEB browser. The default IP is 192.168.1.4.

The logon dialog box is shown as below.

Fig. 11.

Username: The default username of the network camera is system.

Password: The default password of the network camera is system.

Port: The data port of the network camera is default to be 6002.

Note:

1) If the data port of the network camera is changed, please ll in the changed port when logging on. Or it is

not allowed to log on.

2) Please click the push-down list at the upper right corner of the logon interface to change the language.

4.1.2. Video plugin

First-time logon and installation:

Aer logging on successfully, the user is prompted to download the play plug-in if it is the rst time for the

device to access. Please download and run the play plug-in installation manually. The name of the play plug-in

is HDLive.exe.

Fig. 12.

Double-click the downloaded HDLive.exe. The le shall automatically start its installation of play plug-in for

HD Network Camera User’s Manual WEB browser. Conrm your installation by clicking “Next Step” till the completion

of the installation. Aer the completion of the installation, return to the WEB browser page and refresh the page

to browse the video.

Updating plug-in

When detecting new version of the play plug-in, the system shall prompt updating new version of play

plug-in.

Fig. 13.

Note:

It is required to install this play plug-in if using WEB to browse the video. Currently the plug-in supports

Windows XP/2003/7/8/8.1/10 32 and 64 bits OS.

Due to the reason that the security setting of IE browsers is dierent, it may be required to allow the

uploading of the play plug-in. Please click “Allow” button when the following prompt is shown.

Fig. 14.

Some browsers may be required to congure “Internet options – Security – Custom level”. In the security

settings, please set the ActiveX component and plug-in to be “Enable” or “Prompt”.

Display Resolution

WEB browse client interface optimum display resolution is 1024x768, below this resolution it may cause

incomplete or dislocation and pop up warning prompt window.

4.1.3. WEB Browser Interface

Please refresh the video browse page aer installing the play plug-in. It is divided into three sections shown

as below.

Top: Login user information, detailed settings and exit.

Lower le: Video display

Lower right: Common parameter adjustment and control. Click labels to switch and congure.

Inhaltsverzeichnis

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung