Euroboor BM45AIR Bedienungsanleitung

Mini Air Beveling Machine

BM45AIR

Operators manual

V1.0 FEBRUARY 2022 EOV

www.euroboor.com

Congratulations on purchasing this Mini Air Beveling Machine BM45AIR. At EUROBOOR

we strive to exceed our customers’ expectations by developing and providing premium

and innovative portable drilling and cutting solutions. We believe that a professional like

you must be able to rely on a professional supplier. Which has led us to become a major

player in the industrial world, with our own factory and several offices worldwide. All

because we have always listened to our customers and to the demands from the market.

Our vision is focused on developing innovative portable tools that add value for our

customers and facilitate them in their daily work. We never lose sight of sustainability,

time savings and cost savings.

Enjoy your new machine!

Before operating your new Mini Air Beveling Machine, please first read all instructions.

You find the instructions in this manual and on the warning label on your machine. With

proper use, care and maintenance your machine will provide you with years of premium

grinding performance.

TO REDUCE THE RISK OF INJURY USER MUST READ AND UNDERSTAND ALL

INSTRUCTIONS

To view all our offices and their contact information please visit: www.euroboor.com

The original manual has been produced in the English language. If any discrepancies

should occur in translations, reference must be made to the original version for

clarification.

www.euroboor.com

Inhoudsopgave

1. Safety ........................................................................................................................... 4

1.1 General safety information .............................................................................................. 4

1.2 Specific safety information............................................................................................... 7

2. Description ................................................................................................................. 10

2.1 Intended use................................................................................................................... 10

2.2 Box contents ................................................................................................................... 10

2.3 Description and features ................................................................................................ 11

2.4 Serial number.................................................................................................................. 12

2.5 Technical data................................................................................................................. 12

2.6 Symbols........................................................................................................................... 13

2.7 Environmental ................................................................................................................ 14

3. Assembly .................................................................................................................... 15

3.1 Fitting the cutting plates................................................................................................. 15

3.2 Adjusting the bevel depth .............................................................................................. 16

4. Using the BM45AIR ..................................................................................................... 17

4.1 Air supply system............................................................................................................ 17

4.2 Operating instructions.................................................................................................... 18

5. Maintenance............................................................................................................... 19

5.1 Normal maintenance routine ......................................................................................... 19

5.1 Oil daily ........................................................................................................................... 20

6. Troubleshooting.......................................................................................................... 20

7. Exploded view & parts list ........................................................................................... 21

7.1 Exploded view................................................................................................................. 21

7.2 Parts list .......................................................................................................................... 21

7.3 Accessories ..................................................................................................................... 22

8. Warranty and service .................................................................................................. 23

9. Certifications............................................................................................................... 24

9.1 CE declaration of conformity.......................................................................................... 24

www.euroboor.com

1. Safety

1.1 General safety information

Do not use this Mini Air Beveling Machine before you have thoroughly read and completely

understood this manual, specifically the “General safety instructions” and ‘’Specific safety

information”, including the figures, specifications, safety regulations and the signs indicating

DANGER, WARNING and CAUTION.

Please also observe the relevant national industrial safety regulations. Non-observance of the

safety instructions in the said documentation can lead to an electric shock, burns and/or

severe injuries.

WARNING: When using the Mini Air Beveling Machine, basic safety precautions should

always be followed to reduce the risk of fire, electric shock and personal injury.

READ AND UNDERSTAND ALL SAFETY INFORMATION AND INSTRUCTIONS. Failure to

follow the warnings and instructions may result in electric shock, fire and/or serious

injury.

SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE.

This Operator’s Manual including the “General Safety Instructions” should be kept for later

use and enclosed with the Mini Air Beveling Machine, should it be passed on or sold.

www.euroboor.com

WORK AREA SAFETY

1. Keep your work area clean and well lit. Cluttered benches and dark areas increase the

chance of accidents;

2. Do not operate the Mini Air Beveling Machine in explosive atmospheres, such as in the

presence of flammable liquids, gases or dust. Mini Air Beveling Machines create sparks

which may ignite the dust or fumes.

3. Keep bystanders, children, and visitors away while operating a Mini Air Beveling

Machine. Distractions can cause you to lose control.

PERSONAL SAFETY

WARNING: Wear ear and eye protection when using this Mini Air Beveling

Machine.

1. Stay alert, watch what you are doing and use common sense when using the Mini Air

Beveling Machine. Do not use it while tired or under the influence of drugs, alcohol, or

medication. A moment of inattention while operating the Mini Air Beveling Machine

may result in serious personal injury.

2. Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and

gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in

moving parts.

3. Avoid accidental starting. Be sure that the on-/off- trigger is not pressed when plugging

in the Mini Air Beveling Machine to the air supply. Carrying or plugging in the Mini Air

Beveling Machine with your hands on the trigger increases the chance of accidents.

4. Never place hands, fingers, gloves or clothing near rotating tool parts.

5. Remove adjusting keys or wrench before starting the Mini Air Beveling Machine. A

wrench or a key that is left attached to a rotating part of the Mini Air Beveling Machine

may result in personal injury.

6. Do not overreach. Keep proper footing and balance at all times. This enables better

control of the Mini Air Beveling Machine in unexpected situations.

7. Use safety equipment. Always wear eye protection. Dust mask, non-skid safety shoes,

hard hat and hearing protection must be used for optimal safety.

8. If devices are provided for the connection of dust extraction and collection facilities,

ensure these are connected and properly used. Use of dust collection can reduce dust-

related hazards.

www.euroboor.com

MINI AIR BEVELING MACHINE USE AND CARE

1. Do not force the Mini Air Beveling Machine. Use the correct machine for your

application. The correct machine will do the job better and safer at the rate for which

it was designed.

2. Do not use the Mini Air Beveling Machine if the switch does not turn it on or off. Any

tool that cannot be controlled with the switch is dangerous and must be repaired.

3. Disconnect the air supply before making any adjustments, changing accessories, or

storing Mini Air Beveling Machine. Such preventive safety measures reduce the risk of

starting the Mini Air Beveling Machine accidentally.

4. Store the Mini Air Beveling Machine out of the reach of children and do not allow

people who are unfamiliar with the Mini Air Beveling Machine or these instructions to

operate the Mini Air Beveling Machine. Mini Air Beveling Machines are dangerous in

the hands of untrained users.

5. Maintain the Mini Air Beveling Machine with care. Check for misalignment or binding

of moving parts, breakage of parts, and any other condition that may affect the Mini

Air Beveling Machine’s operation. If damaged, have the tool serviced before use. Many

accidents are caused by poorly maintained tools.

6. Keep cutting tools sharp and clean. Properly maintained tools, with sharp cutting edges

are less likely to bind and are easier to control.

7. Use the Mini Air Beveling Machine and accessories in accordance with these

instructions, taking into account the working conditions and the work to be performed.

Use of the Mini Air Beveling Machine for operations different from those intended

could result in a hazardous situation.

8. Use only accessories that are recommended by EUROBOOR for your Mini Air Beveling

Machine. Accessories that may be suitable for one machine, may become hazardous

when used on another machine.

www.euroboor.com

SERVICE

1. Mini Air Beveling Machine service must be performed only by qualified repair

personnel. Service or maintenance performed by unqualified personnel could result in

risk of injury.

2. When servicing a Mini Air Beveling Machine, use only identical replacement parts.

Follow instructions in the maintenance section of this manual. Use of unauthorised

parts or failure to follow maintenance instructions may create a risk of electric shock

or injury.

WARNING:

Remove the air supply from the machine before carrying out any

installation, adjustment, servicing or maintenance.

1.2 Specific safety information

1. PERSONAL SAFETY

a) Check the air connector, air hose and machine for damage each time before using

the machine

b) Disconnect the air supply before undertaking an maintenance work on the Mini Air

Beveling Machine

WARNING: Risk of injury from high-temperature chips.

c) Never touch the cutting plates and keep all vulnerable body parts clear while the

machine is running, as high-temperature chips are expelled at high speed during

operation

d) During operation, always guide the machine in a direction away from the body

e) Do not use the machine above your head

www.euroboor.com

WARNING: Risk of injury to hands.

f) Do not reach into the processing line with your hands

g) Use both hands to hold and operate the machine

WARNING: Dust created by bevelling may harm your health.

WARNING: Never work on materials that contain asbestos.

h) Some types of dust, such as dust from lead-based paint, is known to cause cancer,

birth defects or other reproductive harm. Risk varies on exposure and should

always be reduced by working in a well-ventilated area and by making use of

approved safety equipment, such as dust masks specifically designed to filter out

microscopic particles

WARNING: Only use accesory’s recommended by Euroboor.

i) Only use recommended “cutting plates”, rated at the machine’s maximum cutting

rate or higher

j) Do not use dull or damaged cutting plates to prevent excessive friction and load,

and thus to prevent damage to and failure of the machine

k) Maintain labels and identification plates, as they carry important information. If

unreadable or missing, obtain replacement

2. TOOL USE AND CARE

WARNING: Not securing the workpiece properly may lead to loss of control.

a) Use clamps or another practical way to secure and support the workpiece to a

stable platform. Holding the work by your hand or against the body leaves it

unstable and may lead to loss of control.

www.euroboor.com

3. RESIDUAL RISKS

In spite of the application of the relevant safety regulations and the implementation of safety

devices, certain residual risks cannot be avoided.

These are:

•Impairment of hearing

•Risk of personal injury from flying particles

•Risk of burns due to accessories becoming hot during operation

•Risk of personal injury due to prolonged use.

Always try to reduce these risks as much as possible.

www.euroboor.com

2. Description

2.1 Intended use

This shape bevelling and deburring tool is an air driven portable machine for machining

workpieces in steel, chrome steel alloys, aluminium, aluminium alloys, brass and plastic. The

machine is designed exclusively for adding bevelled edges, rounding off edges, removing burrs

and removing sharp corners on workpieces. The speed of the machine is variable to suit the

needs of various materials and is equipped with a graduated depth adjustable deck. It comes

standard with 45° cutting plates and R1.5 radius cutting plates.

WARNING: The machine should not be converted or modified, e.g. for any other form

of use, other than as specified in these operating instructions. Warranty will be voided

and the user shall be liable for damages and accidents due to incorrect use.

2.2 Box contents

Note: When unpacking, make sure the parts listed below are included. If missing or broken,

please contact your Euroboor distributor as soon as possible.

1 x BM45AIR Mini air beveling machine

1 x Hex key

1 x Air connector type EURO 1/4"

1 x Torx key

2 x Cutting plates 45°

1 x Oil bottle

2 x Cutting plates R1.5

1 x Instruction manual

Inhaltsverzeichnis

Andere Euroboor Werkzeuge Handbücher

Euroboor

Euroboor ERM.100/3 Bedienungsanleitung

Beliebte Werkzeuge Handbücher anderer Marken

Martor

Martor SECUNORM 175 Bedienungsanleitung

ERKCO

ERKCO 1000 Bedienungsanleitung

jbc

jbc N4473 Bedienungsanleitung

FEINMETALL

FEINMETALL FZWZ-SET-001 Bedienungsanleitung

Worx Professional

Worx Professional Sonicrafter WU676 Bedienungsanleitung

Gage Bilt

Gage Bilt GB713SH Bedienungsanleitung

Hilti

Hilti DX 9-ENP Bedienungsanleitung

norbar

norbar NORTRONIC 34399 Bedienungsanleitung

BGS technic

BGS technic 8578 Bedienungsanleitung

Makita

Makita DHR241 Bedienungsanleitung

Motor Guard

Motor Guard JMB-1250 Bedienungsanleitung

Power Adhesives

Power Adhesives 805-12 Bedienungsanleitung

Clemco

Clemco 24189 Bedienungsanleitung

VVG

VVG VNG 903 Series Bedienungsanleitung

Hilti

Hilti FX 3-A Bedienungsanleitung

Grizzly

Grizzly H6472 Bedienungsanleitung

axing

axing BWZ 5-02 Bedienungsanleitung

Dh-Robotics

Dh-Robotics RGI-100 Anleitung zur Verwendung