Euroheat Harmony 15 Versionshinweis

PART NUMBER

SERIAL NUMBER

Installation &

Servicing Instructions

Harmony 15

Stanford 15

Balanced Flue Gas Stoves

IN1159 Edition F March 2012

When installing the stove this document should be used in

conjunction with Euroheat’s Balanced Flue Technical Guide,

Document No: IN1105.

Balanced Flue Stove

Technical Guide

Document No: IN1105

Information from the Euroheat Technical Team

Euroheat and Nestor Martin have a policy of continual research and development and reserve the right to

modify its appliances without prior notice. We make every effort to ensure that the information provided in

this document is correct and accurate at the time of printing. Continued updates occur to adapt documents to

customer requirements and appliance changes. For the latest editions of all Euroheat documentation visit our

web site www.euroheat.co.uk.

Contents

Safety Precautions 3

Technical Data with Mertik Maxitrol GV34 Gas Valve 4

Accessories Supplied with Stove 5

Hearth and Fireplace Clearances 7

Appliance Location 8

Installation of the Gas Supply 8

Flue Spigot Fitting 9

Installation of the Flue System 12

12Installation of the Gas Log Effect 13

Placement of the Ember Glow Fibres 14

Installation of the Gas Coal Effect 16

Gas Connection 19

Gas Pressure Test Nipple Locations 21

Fitting the Remote Control 22

Information for Users which must be Advised by the Installer Verbally or in Writing 23

Spare Parts for Servicing H15 and S15 Gas Stoves 23

Servicing Instructions 24

Burner Removal and Replacement 25

Changing Gas Operating Type 27

Primary Air Collar Adjustment 27

Thermocouple Replacement 28

Door Handle Adjustment 30

Lower Door Opening and Level Adjustment 30

Manufacturers Identiﬁcation Plate

The identiﬁcation plate is located below the gas valve. To access the plate swing outwards.

The Euroheat Appliance Serial Number

The serial number can be found at 5 locations:

1: On the front page of this manual.

2: On the front page of the operating instructions.

3: On the identiﬁcation plate located below the gas valve.

4: On the registration form.

5: On the registration certiﬁcate returned to the user after

successful registration.

Safety Precautions

a) The stove should be visually inspected and if damaged should not be installed.

b) It is a requirement of the Gas Safety (Installation and Use) Regulations that these instructions,

together with the Appliance User Instructions, be left intact with the user.

c) In your own interest, and those of safety, and in accordance with the Gas Safety (Installation

and Use) Regulations, Euroheat stoves must be installed by a suitably qualiﬁed Gas Safe

technician using the appropriate ﬁttings for the gas type being used, and the stove must not

be modiﬁed in anyway. The gas technician will be responsible for the installation conforming

to all current regulations and standards, during the life of this publication these standards may

be superceded and it is the installer’s responsibility to ensure the installation conforms to the

whatever standards are current at the time of installation. Failure to install the appliance

correctly could lead to prosecution.

BS 1251 : 1987 Fireplace Components

BS 5871 : PT 1 2005 Installation of Gas Fires

BS 5482 : PT 1 1994 LPG Installations

BS 6891 : 1998 Pipe Work Installation

d) It is important to ensure that the ﬂue system on which the appliance is to be installed is

ﬁtted in accordance to Euroheat’s Balanced Flue Technical Guide, Document No: IN1105.

It is therefore important, in the interests of safety, that these instructions are strictly followed,

together with the legal Statutes and Codes of Practice, current at the time of installation.

e) It is important that the stove is installed so that the clearances speciﬁed in these instructions are

complied with, see page 7.

f) The stove must NOT be run with its door open.

g) It is also important that the occupiers of the property have their attention drawn to the high

temperatures which are normally present on the external surfaces of the stove during operation.

h) Fireguards, in accordance with current British Standards, should be ﬁtted when the appliance is

in the presence of young children, the elderly or inﬁrm.

i) Do not use the stove if any of the ceramic log or coal effect components are damaged or broken

during transportation. Check all gas joints within the stove for gas tightness as vibration during

transportation may loosen them.

j) Ensure that all transport packaging is removed from inside and outside of the stove.

k) The plastic bags used to protect components of this appliance are a potential hazard to young

children, and should be disposed of immediately.

l) The stove must be serviced annually by a suitably qualiﬁed Gas Safe technician.

Harmony 15 and Stanford 15 Gas Balanced Flue

Model Number

Harmony 15 H15

Stanford 15 S15

Heat Output Maximum

G20 Natural Gas 4.05kW

G31 Propane 4.03kW

Standard supply appliance is conﬁgured for Natural Gas; for LPG specify at time of order

Gas Input Maximum

G20 Natural Gas 4.7kW

G31Propane 4.64kW

Primary Air Collar Setting

G20 Natural Gas 3mm

G31 Propane 5mm

Free Air Requirement NIL

Fuel Effect Type: Wood Ceramic burner, 4 Ceramic logs,

1g Bag platinum ember glow ﬁbres

Fuel Effect Type: Coal Ceramic burner, 3 molded & 2 loose coals,

1g bag platinum ember glow ﬁbres

(specify at time of order)

Heat Control Manual with remote control option

Ignition Type Piezo

Pilot Flame Yes

Flame Failure Yes

Fuel Outlet Options Top or Rear

Flue Size 150mm (6”) External diameter

Warranty Standard 1 Year

Colour Options Cast Black, Satin Black Enamel,

Bottle Green Enamel (H13 ONLY)

Decorative Cast Iron Plinth Optional extra

Seasonal Efﬁciency

The efﬁciency of this appliance has been measured as speciﬁed in BS EN 613:2001 and the result is 78% Nat

Gas and 81% LPG. The gross caloriﬁc value of the fuel has been used for this efﬁciency calculation, the Net

efﬁciency being 87% Nat Gas and 88% LPG. The test data from which it has been calculated has been certiﬁed

by BELTEST. The efﬁciency value may be used in the Government’s Standard Assessement Procedure (SAP) for

energy rating of dwellings.

Technical Data with Mertik Maxitrol GV34 Gas Valve

Gas

Type

Gas

Pressure

mbar

Main Jet

Pilot

Jet

Maximum output

Control set to Maximum

Minimum output

Control set to

Minimum

Hourly

Flow

High

Burner

Pressure

Net

Efﬁciency

Gross

Efﬁciency

Hourly

Flow

Low

Burner

Pressure

G20

Natural

Gas

1 jet

with

4 x 0.87

27.2 0.49

m3/h 17 mbar 87 78 0.38

m3/h 10 mbar

G31

LPG 37

1 jet

with

4 x 0.57

22.1 0.38

m3/h 31 mbar 88 81 0.29

m3/h 18 mbar

Flue Spigot (Collar) and Choke Plate

The ﬂue spigot (collar), inner ﬂue pipe

and choke plate may be found either

screwed to the pallet on which the

stove is delivered or within the body

of the stove.

Elbow for Gas Fitting

Accessories Supplied with Stove

Supplied with the balanced ﬂued gas stoves are a number of installation accessories and instruction manuals.

Nut

Olive

Elbow

Foot Levelling Screws and Triangular Hearth Protectors

In the plastic bag within the stove there will be 4 foot

levelling grub screws and 4 plastic triangular hearth

protectors. The grub screws should be ﬁtted to the feet

prior to installation to allow for levelling the stove on an

uneven hearth.

The plastic hearth protectors can be put under the feet to

protect the hearth when sliding the stove into position,

but should be removed unless required to help level the

stove.

Enamel Repair Touch Up

(Enamel Stoves Only)

In the plastic bag within the stove there

will be a bottle or tube of enamel touch

up which will match the enamel ﬁnish

on the stove. This can be used to repair

any minor chips on the enamel surface

of the stove.

Grub Screw

Plastic Hearth Protector

EMBERGLOW

Platinum

Bright

Embers

Ember Glow

Small squares of platinum

embers which when teased

out give an ash effect with

the ceramic log or coal effect

(see page 13).

Flue Spigot (collar)

Inner Flue Pipe

Choke Plate

Glove

A heat proof glove is also supplied

with the stove. This is for use by the

installing and servicing engineer if

they have to open the main ﬁrebox

door when hot.

Installation Instructions and Balanced Flue

Technical Guide IN1105

For the use of the suitably qualiﬁed engineer for the

installation and servicing of the stove.

MUST be handed to the owner of the stove.

Operating Instructions

For the use of the person for the safe operation of the

stove.

MUST be handed to the owner of the stove.

If there are any of the above documents missing from your stove

upon delivery please contact Euroheat with the serial number of the

stove and we will immediately despatch a replacement.

Balanced Flue Stove

Technical Guide

Document No: IN1105

Fraxﬁll (MS9045)

Fraxﬁll is a pliable white ceramic ﬁbre gap ﬁll and

should be used for sealing all the ﬂue joints. It is

supplied for use with a sealant gun. It is odourless

and recommended for applications with operating

temperatures of 1200°C.

PART NUMBER

SERIAL NUMBER

Installation &

Servicing Instructions

Harmony 15

Stanford 15

Balanced Flue Gas Stoves

IN1159 Edition E June 2009

PART NUMBER

SERIAL NUMBER

Operating Instructions

Harmony

Stanford

Conventional Flue & Balanced Flue

Gas Stoves

IN1123 Edition G June 2009

GAS STOVE REGISTRATION

Please complete the form on pages 3 and 4 and return it with a

copy of your sales receipt from your Euroheat approved supplier

to obtain your

THREE GOOD REASONS

Why you should have your stove commissioned.

It is vital for the longevity and efﬁcient and safe operation of the stove to have the stove installed and

commissioned by a competent qualiﬁed heating engineer.

1. Installation

The stove should be installed by a competent qualiﬁed heating engineer, who will be conversant with the

Building Regulations and Codes of Practice current at the time of installation. Installation instructions are

supplied with the stove which contain instructions speciﬁc to the appliance.

Incorrect installation may lead to poor performance of the stove and ultimately damage to the appliance.

2. Operating

The operation of the stove should be demonstrated by a competent person, so you, as the operator, are

conversant with the operation of the controls. Instructions on the use of the controls can be found in the

operating instructions supplied with the stove.

Incorrect operation of the controls of the stove may lead to poor performance from the stove and ultimately

damage the appliance.

3. Maintenance

Routine maintenance as described in the operating instructions, supplied with the stove, should be

undertaken by a competent person.

Failure to perform the routine maintenance may adversely effect the performance of the stove and

ultimately damage the appliance.

Registration Form

To be completed by both the owner of the stove and the installing/

commissioning engineer.

It MUST be returned to Euroheat for the registration to be completed.

Hearth and Fireplace Requirements

Do not be tempted to ﬁt the stove into an unsuitable ﬁreplace. Beyond the requirements

of the building regulations and access to facilitate servicing the stove, providing a

setting which will complement the stove is not a luxury, it is the practicality of making

the most of an investment. A good builder will be able to transform even the most

utilitarian of ﬁreplaces, whether altering its proportions to those of the “Golden Mean”

ideal, exposing a wooden lintel, stone or simply removing superﬂuous detailing for

comparatively small costs, and the result will be a pleasure for many years.

Minimum clearance

from combustible

materials

Minimum clearance

from non

combustible

materials

A 12" 300mm** 9" 230mm

B 6" 150mm** 4" 100mm

C 1" 25mm** N/A

D 2" 50mm** 2" 50mm

E 6" 150mm** 4" 100mm

F12mm of non

combustable material.

12mm of non

combustable material.

Curtains and furnishings should be a minimum of

1m from the stove.

The stove can be placed on a combustible

ﬂoor providing it can support the weight,

and providing a non combustible hearth

plinth with a minimum thickness of

12mm is utilized.

** The measurements provided are

for guidance only.

In all installations any surrounding

ﬂammablematerialsmustnotbeallowed

to exceed 80°C or a non combustible

shield provided in accordance with

current regulations. The stove must

always stand perfectly level and have

sufﬁcient space allowing for service

work.

1/3 2/3

“Golden Mean”

Side Proﬁle

2/3 2/3

“Golden Mean”

Front View

Appliance Location

a) In a ﬁreplace recess the stove can be mounted on a 12mm thick decorative hearth or plinth, if

a constructional hearth of the correct dimensions is in place. In a free standing situation, as the

hearth temperature does not exceed 100ºC, a constructional hearth is not required. The stove

can be mounted on a 12mm thick non-combustible decorative hearth of the correct size i.e. a

cast iron plinth, provided that the ﬂoor can support the weight.

b) Combustible material at the rear of the stove shall be protected against the effects of heat.

c) There must be a minimum of 300mm from the top of the stove to the underside of any combustible

shelf. Note that for every 50mm increase on clearance, the shelf may project by a further 50mm.

d) The appliance, being room sealed, may be installed in a room or space which will be used by the

occupants for sleeping.

e) Any manufactured surround used with this stove should comply with the appropriate British Standard.

f) Do not place furniture, furnishing or combustible objects within 1 metre of the stove.

If any of these conditions are not fulﬁlled,

DO NOT FIT THE STOVE until this has been rectiﬁed.

Installation of the Gas Supply

BS 6891

NOTE:

Ensure that the gas supply is capable of delivering the required amount of gas, and is in accordance with

the relevant current standards.

It is generally preferred to conceal the gas supply by bringing it under the hearth, or through masonry to the

side of the ﬁreplace. Any pipe work in 8mm tube connecting the stove to the main pipe work should be kept

as short as possible with as few ﬁttings as possible to prevent restrictions.

a) Whenever a gas pipe passes through any masonry it must have a sleeve of non combustible material

sealed at both ends to prevent the gas supply from coming in contact with masonry or lime based

mortars.

b) The gas pipe should be adequately supported over longer lengths.

c) Soft copper tubing and soft soldered joints are suitable, providing the tube is not closer than 150mm

to the stove casing i.e. the temperature must not exceed 100°C.

d) A means of isolating the gas supply to the appliance must be provided independent of any appliance

control. This may be a gas cock, ideally of the nursery type to prevent children interfering with the

gas supply.

e) Any gas tubing that has been passed through masonry, should be purged to expel any foreign

materials that may have entered the supply.

f) Care should be taken to ensure that pipe work brought through metal structures has been secured to

prevent chafﬁng, but allow for thermal expansion.

Flue Spigot Fitting

The ﬂue can be either top or rear exit. The ﬂue collar (spigot) is supplied attached to the pallet on which the

stove is delivered or within the body of the stove. It will need ﬁtting to the stove depending on which ﬂue kit

you are using, rear exit can only be used on the rear to horizontal low-level ﬂue kit.

Fitting Top Flue Spigot

The stove comes with the inner top ﬂue pipe adapter ﬁtted to the stove with a choke plate ﬁtted below it, see

picture below. Ensure that the choke plate ﬁtted is correct for the gas type and ﬂue conﬁguration to be installed,

this information is in the Balanced Flue Stove Technical Guide: IN1105, page 24. If not replace with the correct

choke plate which can be found in the bag of installation accessories.

Inside the stove in the bag of installation accessories will be the ﬂue spigot gasket and two M5 screws to ﬁt the

cast iron spigot. Fit the gasket as shown above and then attach the ﬂue spigot using the two screws.

Fitting Flue Spigot and Inner Adapter Pipe

to the Rear of the Stove.

1) Remove the inner adapter pipe, see above, and

choke plate from the top of the stove. The choke plate

is not required for the rear ﬂue option.

Choke plate

Ceramic gasket

Inner ﬂue pipe

adapter

Choke plate

Andere Handbücher für Harmony 15

Inhaltsverzeichnis

Andere Euroheat Herd Handbücher

Euroheat

Euroheat Harmony 5 Mk2 Handbuch

Euroheat

Euroheat Harmony 5 Bedienungsanleitung

Euroheat

Euroheat Harmony 44 Versionshinweis

Euroheat

Euroheat FB50 Bedienungsanleitung

Euroheat

Euroheat Classic i Harmony 1 394.92B3 Benutzerhandbuch

Euroheat

Euroheat Harmony 1 Betriebsanleitung

Euroheat

Euroheat Nestor Martin IT13 Bedienungsanleitung

Euroheat

Euroheat EVO Aqua Versionshinweis

Euroheat

Euroheat Harmony 15 Kurzanleitung

Euroheat

Euroheat Harmony 35 Versionshinweis

Euroheat

Euroheat WIKING MIRO Range Bedienungsanleitung

Euroheat

Euroheat Harmony evolution H13 Bedienungsanleitung

Euroheat

Euroheat Nestor Martin IN13 Bedienungsanleitung

Euroheat

Euroheat 49991 Benutzerhandbuch

Euroheat

Euroheat Harmony Stanford IN1123 Bedienungsanleitung

Euroheat

Euroheat Nestor Martin IN13 Versionshinweis

Euroheat

Euroheat Nestor Martin IT13 Versionshinweis

Euroheat

Euroheat Nestor Martin Harmony Series Benutzerhandbuch

Euroheat

Euroheat Efel Bedienungsanleitung

Beliebte Herd Handbücher anderer Marken

Arada

Arada Cassette Stove Bedienungsanleitung

Parmco

Parmco FS 600 Bedienungsanleitung

MCZ

MCZ SUITE AIR 10 M2 Bedienungsanleitung

HearthStone

HearthStone Stowe DV 8321 Fehlerbehebungshandbuch

Cattara

Cattara FAMILY Bedienungsanleitung

Stanley

Stanley Argon F500 OVAL Bedienungsanleitung

Avalon

Avalon B-VENT Bedienungsanleitung

Nordpeis

Nordpeis Vega Bedienungsanleitung

Exquisit

Exquisit EKC601-5 Bedienungsanleitung

Stanley

Stanley Oisin Oil MK II Betriebsanleitung

Thermocet

Thermocet Brookfield S/CC Bedienungsanleitung

HASE

HASE delhi Bedienungsanleitung

Vermont Castings

Vermont Castings Intrepid 2 Bedienungsanleitung

Italiana Camini

Italiana Camini CLASSICA Kurzanleitung

Avalon

Avalon Vashon Avanti DVS FS Bedienungsanleitung

Spartherm

Spartherm ambiente a1 Bedienungsanleitung

Dimplex

Dimplex MCFSTV12AU Bedienungsanleitung

Warmlite

Warmlite WL46040 Bedienungsanleitung