EuropAce EWF 6162V Bedienungsanleitung
16” WALL FAN WITH REMOTE
EWF 6162V
Thank you for purchasing EuropAce Oscillating Power Fan.
For safety purpose, please read this operating instruction manual carefully before using and
keep it for future reference.
FOR HOUSEHOLD USE ONLY
SAVE THESE INSTRUCTIONS
SPECIFICATIONS
MODEL NO VOLTAGE POWER
EWF 6162V 220-240V~50Hz 50W
STRUCTURE AND PARTS
1. Motor 6 Grill belt
2. Wall fan body 7. Fan blade
3. Control panel 8. Fan blade nut
4. Black grill 9. Front grill
5. Fasten nut
4
1
3
2
5
6
7
8
9
IMPORTANT SAFEGUARDS
When using an electrical appliance, basic safety precautions should always be observed,
including the following:
READ ALL INSTRUCTIONS BEFORE USING
WARNING: To reduce the risk of fire, electrical shock, or injury to a person:
1. This appliance can be used by children aged from 8 years and above and persons with
reduced physical, sensory or mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning use of the appliance in a safe
way and understand the hazards involved.
2. Children shall not play with the appliance.
3. Cleaning and user maintenance shall not be made by children without supervision.
4. WARNING! After assembly, it's strictly forbidden to remove the protective fan guards
during maintenance or cleaning.
Never use the fan without the guards in place.
It is forbidden to disassemble the fan guard when cleaning.
5. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent
order to avoid a hazard.
6. Do not insert or allow foreign objects to enter the guard openings as this may cause
damage to the appliance or injury to the user.
7. Do not put any clothes or curtains on the fan head as they could be sucked into the fan
during operation and damage the appliance.
8. Before using this product, read these instructions and keep them for future reference.
9. If you give this appliance to another person, also give it these instructions.
10. Use this appliance as described in this manual. Misuse and any use contrary to these
instructions shall not engage in any way the responsibility of the manufacturer.
11. There is a risk of electric shock, fire, and injury to persons if you do not follow these
Instructions.
12.Do not use accessories other than those recommended by the manufacturer. Not
recommended accessories could damage the equipment and cause injuries.
13.Install the appliance on a flat and stable place and not subject to constant vibrations.
Put it in a vertical position. Any other position is dangerous.
14.Keep a minimum distance around the apparatus for sufficient ventilation.
15.Do not install the appliance near sources of open flames, such as lighted candles.
16.Do not install the appliance in places exposed to humidity, bad weather, and wet places.
17.Do not expose the appliance to water, dripping or splashing. Do not place on the
appliance any objects filled with a liquid such as vases.
18.Do not immerse the appliance in water and other liquids.
19.Do not disassemble the appliance yourself. Disassembly, repair, verification shall be
made only by a qualified person.
Assembly Installation
The fan is packed with its foundation and/or other parts unattached. You must
attach them before operating the fan.
WARNING: Never operate without its foundation and/or other parts attached.
To operate the fan only in an upright position; any other position could create a
hazardous situation.
Assemble a sequence of the foundation and other parts as follow:
a. Unpack the fan and remove all parts from the package.
b. Use the fastening nut for the back grill to attach the back grill to the fan
head and use the fan blade head for fan leaf to hold the fan leaf in place.
c. To attach the front grill to the back grill, you should use the grill ring
carefully to hold them together and fasten the grill ring right with the screw
provided.
The fixed fan on the wall
a. Draw its position on the wall, according to the location and size of the
fixed hanging board, (Figure 1)
b. Use a percussion drill with a diameter of 6mm to drill two holes (if the
wall is cement)
c. Drive plastic expansion pipe into the two holes and fix the hanging
plate (fixed in the direction as shown in Figure. 1) with screws attached
to the plate, and then conduct inspection check firmly before hanging
the body back hook on the hanging board (as shown in figure 2).
Note:
1) after installation, ensure that the height of the product is greater than 1.8m.
2) drive the attached plastic expansion pipe into the wall. The fan can be hung
up after confirmation.
When fan power is on, and if the hanging board is found to be loose,
immediately cut off the power and remove it for reinstallation.
Instruction for operating the wall fan
Plugin the power first, then you will hear the sound of "beep", and the indicator
light will not be on.
a. Press the button “On/Off speed” to start the fan: press this button when the
fan is turned on. The wind speed is automatically set at the "1" position.
"Turn on” – “1” –“2” –“3” – “shut down” is the sequence loop, and the
corresponding light is on. Hear a "beep" sound when selected at the
shutdown state.
b. Set the timer by pressing the timer button to select the desired timing, the
range is between 0.5 - 7.5 hours. The Pilot light corresponding to the
selected timing will be illuminated.
c. If you want to enlarge the fan coverage area in your room, press the OSC
button, the fan will oscillate and blast your room in a larger scope. To stop
oscillating just press the OSC button again.
To completely shut the fan off, turn all the controls to off, and remove the
plug from the socket-outlet.
MAINTENANCE
Warning
Do not immerse the fan in water.
Do not use any cleaning chemicals such as detergents and abrasives.
Do not allow the interior (special for the PCB) to get wet as this could create a
hazard.
1. Always remove the plug from the socket-outlet and allow the fan to stop
acting before clean the fan.
2. Clean the external surfaces of the fan with a soft damp (not dripping wet)
cloth.
3. When the unit is not in use, make sure that it is unplugged from the wall
socket. To store the fan, you may pack it in the original carton and store it in
a cool and dry place until later use.
4. In case of malfunction or doubt, do not try to repair the fan yourself, it may
result in a fire hazard or electric shock.
EWF 6162V
Inhaltsverzeichnis
Andere EuropAce Lüfter Handbücher
EuropAce
EuropAce EJF 7120W Bedienungsanleitung
EuropAce
EuropAce EQQ 7931S Bedienungsanleitung
EuropAce
EuropAce EPF 7183U Bedienungsanleitung
EuropAce
EuropAce ETF 956P Bedienungsanleitung
EuropAce
EuropAce EJF 198C Bedienungsanleitung
EuropAce
EuropAce EJF 581S Bedienungsanleitung
EuropAce
EuropAce EJF 7981V Bedienungsanleitung
EuropAce
EuropAce RETRO ERF 7161T Bedienungsanleitung
