Event Lighting SABER2 Bedienungsanleitung

SABER2

3-in-1 Disco Effect Featuring Derby, UV and Strobe

USER MANUAL

For your safety, please read this user manual carefully before use.

Event Lighting reserves the right to revise the manual at any time. Information and specifications

within this manual are subject to change without notice. Event Lighting assumes no liability or

responsibility for any errors or omissions. Please consult Event Lighting for any clarification or

information regarding this item.

Version 1.0

www.event-lighting.com.au

Safety Instructions

Warning

• Do not open this device, there are no user serviceable parts inside. Risk of electric

shock.

• Do not look directly at the light source from close range.

• Avoid contact with the unit during operation, as the housing may become hot. Allow the

fixture to cool for at least 15 minutes after turning off before touching.

• Install this device in a location with adequate ventilation, at least 50cm from adjacent

surfaces.

• Do not operate this device, or connect this device to power, within 50cm of any

flammable material.

• Use a safety chain when mounting this device overhead.

• Do not operate this device outdoors where excessive dust, heat, water, or humidity may

affect it.

• Do not operate this device if the housing, lenses, or cables appear damaged.

• Do not connect this device to a dimmer or rheostat.

• Do not operate this device at temperatures higher than 40°C (104°F).

• Only connect this device to a grounded and protected circuit.

• Only use the hanging bracket to carry this device.

• Stop using this device immediately if a serious operating problem becomes apparent.

Product Installation

SABER2 can be mounted in many orientations, provided each individual device is secured by the

use of the correct mounting bracket. Use a safety chain when mounting SABER2 overhead.

www.event-lighting.com.au

Dimensions

www.event-lighting.com.au

Control Panel

Buttons

(1) MENU – Select program functions.

(2) ENTER – Confirm the selected function.

(3) UP – Increase parameters.

(4) DOWN – Decrease parameters.

Input and Output

(5) IEC power in.

(6) 3-pin DMX in.

(7) 3-pin DMX out.

www.event-lighting.com.au

Display

Function

Value/Description

Addr

DMX Address

A001-A512

SLAV

Master/Slave

No/Yes

A1-1 ~ A1-9

Derby effects

Red, 1-9 to adjust motor speed.

A2-1 ~ A2-9

Derby effects

Green, 1-9 to adjust motor speed.

A3-1 ~ A3-9

Derby effects

Blue, 1-9 to adjust motor speed.

A4-1 ~ A4-9

Derby effects

White, 1-9 to adjust motor speed.

A5-1 ~ A5-9

Derby auto mode

1-9 to adjust run speed.

A6-1 ~ A6-9

UV effects

No function. Manual UV control only allows one level.

A7-1 ~ A7-9

Strobe effects

1-9 to adjust strobe speed.

A8-1 ~ A8-9

Combined Auto mode

1-9 to adjust auto run speed.

S1-1 ~ S1-9

Sound mode 1

Derby effect, 1-9 to adjust the sound sensitivity.

S2-1 ~ S2-9

Sound mode 2

3-in-1 effect, Blackout when without sound,

1-9 to adjust the sound sensitivity.

S3-1 ~ S3-9

Sound mode 3

3-in-1 effect, Light up when without sound,

1-9 to adjust the sound sensitivity.

DMX Chart

Function

Value

Description

Derby Motor rotation

000-127

Directional rotation

128-255

Rotate automatically, fast to slow

Derby Motor rotation range

000-255

0 to 340 degrees

Derby Master dimmer

000-255

Dimmer 0-100%

Derby Strobe

000-010

No Strobe

011-255

Strobe, slow to fast

Derby effect

000-255

Red dimmer, 0-100%

Derby effect

000-255

Green dimmer, 0-100%

Derby effect

000-255

Blue dimmer, 0-100%

Derby effect

000-255

White dimmer, 0-100%

Derby Auto mode

000-255

Derby Effect auto run

Derby Speed Adjust

000-255

Auto run speed, slow to fast

UV effect

000-255

UV dimmer, 0-100%

UV strobe

000-255

UV strobe, slow to fast

Strobe effect

000-255

White dimmer, 0-100%

Strobe Speed

000-010

No strobe

011-255

Strobe, slow to fast

www.event-lighting.com.au

Macros

000-050

Control with channels 1 to 14

051-100

Sound mode 1, derby effect

101-200

Sound mode 2, 3-in-1, blackout when no sound

201-255

Sound mode 3, 3-in-1 auto-run when no sound

Technical Specifications

Power

• Input Voltage: 100~240V AC, 50/60 Hz.

• Power Consumption: 42W.

• Connection: IEC in.

Photometrics

• Light Source:

o Derby: 2pcs 4-in-1 8W RGBW LEDs.

o Strobe: 2pcs 10W White LEDs.

o UV: 8pcs 3W UV LEDs

• LED Lifespan: 50,000 hours.

Effects

• Dimming: 0-100%, 8-bit.

• Strobe: 1-20 Hz.

Control

• Protocol: DMX512.

• DMX Channels: 15

• Interface: 3-pin DMX in/out.

• Operation modes: DMX, Manual, auto, sound active, master/slave

• Display: LED Display with 4-button control.

Housing

• Finishing: Matte Black.

• Net Weight: 2.15kg

• Dimensions: 260x260x250 mm (packaging).

Warranty

Please refer to your local dealer or contact Event Lighting.

Inhaltsverzeichnis

Andere Event Lighting DJ-Equipment Handbücher

Event Lighting

Event Lighting M1B60W Bedienungsanleitung

Event Lighting

Event Lighting M1S190W Bedienungsanleitung

Event Lighting

Event Lighting PAR12x8A Bedienungsanleitung

Event Lighting

Event Lighting DASDI1000RGB Bedienungsanleitung

Event Lighting

Event Lighting PIXBAR12x3 Bedienungsanleitung

Event Lighting

Event Lighting PS300IICW Bedienungsanleitung

Event Lighting

Event Lighting BLINDER Series Bedienungsanleitung

Event Lighting

Event Lighting LM75 Bedienungsanleitung

Event Lighting

Event Lighting M7W40RGBW Bedienungsanleitung

Event Lighting

Event Lighting M1S75W Bedienungsanleitung

Event Lighting

Event Lighting M19W15RGBW Bedienungsanleitung

Event Lighting

Event Lighting M6B20W Bedienungsanleitung

Event Lighting

Event Lighting BM7W10RGBW Bedienungsanleitung

Event Lighting

Event Lighting ENFORCER580 Bedienungsanleitung

Event Lighting

Event Lighting M7W15RGBW Bedienungsanleitung

Event Lighting

Event Lighting EL1000RGB Bedienungsanleitung

Event Lighting

Event Lighting PARP12x8 Bedienungsanleitung

Event Lighting

Event Lighting PRO PAR PAR6X12OB Bedienungsanleitung

Event Lighting

Event Lighting STROBEXRGB Bedienungsanleitung

Event Lighting

Event Lighting DGS400RGB Bedienungsanleitung

Event Lighting

Event Lighting PAN2*1*30 Bedienungsanleitung

Event Lighting

Event Lighting DARKSTAR2 Bedienungsanleitung

Event Lighting

Event Lighting M1S80W Bedienungsanleitung

Event Lighting

Event Lighting PANBEAM4x4x10 Bedienungsanleitung

Beliebte DJ-Equipment Handbücher anderer Marken

ALPHA LITE

ALPHA LITE ALPHA 1500 Betriebsanleitung

Chauvet

Chauvet OVATION E-930VW Bedienungsanleitung

Zumtobel

Zumtobel APHRODITE Home Bedienungsanleitung

Snow Masters

Snow Masters Zig Oscillator Bedienungsanleitung

EuroLite

EuroLite 50530554 Bedienungsanleitung

Beamz

Beamz BUV243 Bedienungsanleitung

thomann

thomann Stairville DJ Lase 40-G MK-III Bedienungsanleitung

Eagletone

Eagletone 6 Eyes Flower Bedienungsanleitung

EuroLite

EuroLite FLD-1508 Bedienungsanleitung

Technical Pro

Technical Pro LG8xSEA Bedienungsanleitung

JB Systems

JB Systems Lounge Laser DMX Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Halo 90 Bedienungsanleitung

Elation

Elation FUZE WASH Z350 Bedienungsanleitung

Maverick

Maverick MK3 WASH Bedienungsanleitung

Infinity

Infinity TF-260C7 Fresnel Bedienungsanleitung

Chauvet

Chauvet EVE E-50Z Bedienungsanleitung

Eliminator Lighting

Eliminator Lighting E 138 Bedienungsanleitung

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Bedienungsanleitung