Everbilt DPJC125 Bedienungsanleitung

THANK YOU

We appreciate the trust and confidence you have placed in Everbilt through the purchase of this deep well double

pipe ejector package. We strive to continually create quality products designed to enhance your home. Visit us online

to see our full line of products available for your home improvement needs. Thank you for choosing Everbilt!

SKU # 1001094001

Model # DPJC125

USE AND CARE GUIDE

DOUBLE PIPE

DEEP WELL JET KIT

Questions, problems, missing parts? Before returning to the store call

Everbilt Customer Service

8 a.m. - 6 p.m., EST, Monday-Friday

1-844-241-5521

HOMEDEPOT.COM

Table of Contents

Table of Contents.................................2

Safety Information................................2

Pre-Installation.....................................2

Assembly.............................................. 3

Installation ........................................... 5

Safety Information

Follow the safety instructions in your pump owner's manual.

BE SURE the pump is turned off and all pressure is released before attempting to install the deep well ejector.

Pre-Installation

APPLICATION

This double pipe deep well ejector package(ModelDPJC125) includes a deep well ejector, check valve, strainer,

plastic pipe adapter, and an assortment of nozzles and venturis to suit your well conditions. This ejector assembly is

designed for all 4 in. and larger double pipe applications.

PACKAGE CONTENTS

Part Description Qty. Part No.

A Venturi 1 each

J32P-18

J32P-24

Nozzle(#52)

(#51)

(#53)

1 each

J34P-42

J34P-41

J34P-43

C Ejector Body 1 N40-92

D Check Valve 1 N212-12P

E Strainer 1 L8-1P

F Plastic Pipe

Adapter 1 U11-104P

3 HOMEDEPOT.COM

Please contact 1-844-241-5521 for further assistance.

Assembly

1.This kit contains two venturis and three nozzles (See the chart on page 2). Use only one venture and one nozzle

with any installation. Select the correct nozzle and venturi from the Application Chart as follows.

NOTE: Be sure to find the right pump model, well depth, and nozzle/venture combination on the chart or the pump will not perform

according to specifications (See Application Chart as follows).

4 in. DOUBLE PIPE JET PACKAGE NO. DPJC125 APPLICATION CHART

Brand/Series No.

Max Depth to Water in Ft. (M)

Everbilt Depth Less Than Use Nozzle Use Venturi

1000 026 690 3/4 70’(21.3 m) J34P-42(#52) J32P-18

1000 026 688 1 100’(30.5 m) J34P-42(#52) J32P-18

Brand/Series No.

H.P.

Max Depth to Water in Ft. (M)

Flotec Simer Craftsman Mastercraft Depth

Less Than

Use

Nozzle

Use

Venturi

Depth

Less Than

Use

Nozzle

Use

Venturi

FP4432 3305P 2532 561471 1 130’(39.6M) J34P-

42(#52) J32P-24 260’(79.2M)

J34P-

42(#52) J32P-18

FP4312 1/2 50’(15.2M) 70’(21.3M)

FP431242 2511 1/2 50’(15.2M) J34P-

41(#51) J32P-24 70’(21.3M) J34P-

42(#52) J32P-18

FP4432 3307P 2519 561472 3/4 70’(21.3M)

J34P-

43(#53) J32P-24 100’(30.5M)

FP4432 3310P 2522 561474 1 90’(M) N.A. N.A. N.A.

FP4212 1/2 50’(15.2M)

J34P-

41(#51) J32P-24 70’(21.3M) J34P-

42(#52) J32P-18

FP4222 3/4 70’(21.3M) 100’(30.5M)

NOTE: If the depth to water in your well is more than the distance listed in the hand column (for your pump),you MUST use the nozzle/vebturi

combination listed in the right hand column or your pump will not be able to lift water from the well.

Nozzle/venturi combination in the left hand column give greater flow. Combinations in the right hand column give greater pressure.

2.Inspect the ejector body, nozzle, and venturi

carefully to BE SURE that they are clean and free of all

foreign materials. Dirt, sand, or gravel will plug the

ejector!

The pump sends part of the discharge down the drive

pipe and through the ejector, where the flow through

the nozzle and venturi picks up more water and

delivers it to the pump suction. This allows the pump

to lift water more than 25 ft. (the limit for a shallow

well pump).

Figure 2 – What the deep well ejector does

Assembly (continued)

3. Use a 5/8 in. deep-well socket to install the new

nozzle in the top (double port) of the ejector body (See

Figure 3). The nozzle screws into the third set of

threads visible inside the ejector discharge port (the

larger port) in the ejector body.

4. Install the venturi in the ejector body. The venturi

threads into the second set of threads in the ejector

discharge port (it threads in over the nozzle).The end of

the venturi will extend out of the port when it is installed

(See Figure 4).

Figure 3

Figure 4

5. Install the check valve and strainer on the single-

port end of the ejector (the bottom of the ejector - See

Figure 5).

6.Wrap 1-1/2 turns of Teflon tape onto the threaded end

of the pipe adapter. Thread the long adapter (furnished)

into the ejector discharge port (slide it over the venturi to

install it). Tape and install a short adapter (not furnished -

purchase locally) in the drive port (See Figure 6). The

adapters must be tight - if the assembly leaks, the pump

will not lift water from the well.

Figure 5

Figure 6

5 HOMEDEPOT.COM

Please contact 1-844-241-5521 for further assistance.

Installation

4" Cased (Drilled) Well

1. Determine the length of flexible plastic pipe needed to locate the ejector at the proper depth (your well driller

should supply this information). Measure carefully and cut suction (1-1/4") and drive (1") pipes to length.

NOTE: As a guide, set the ejector 10 to 20 feet below the lowest water level reached with the pump running, but always at least five

feet above the bottom of the well (See Figure 7).

Figure 7

2. Connect the plastic pipes to the adapters with hose clamps (See Figure 8); use two clamps per joint. Put the

tightening screws on opposite sides of the pipe as shown.

NOTE: Clamp the pipe securely and only use clamps that are all stainless steel.

3. Install steel nipples in the sanitary well seal.

NOTE: To allow correct alignment of the pipes with the pump ports, the 1-1/4" (suction) pipe must run above the 1" (drive) pipe. Adjust

the height of the nipples in the well seal to allow for this.

Figure 8

Installation (continued)

4. Use pipe couplings and adapters to connect the nipples to the plastic pipe in the well (See Figure 9). Teflon tape

all threaded joints to prevent leaks.

NOTE: CLAMP THE PIPE SECURELY; the clamps must hold the weight of the pipes, the ejector, and the water in the pipes. In a 110' well,

this can be more than 100 lbs.

Figure 9

5. Install steel elbows on the top end of the nipples (See Figure 10). Teflon tape all threaded joints to prevent leaks!

NOTE: Installing the elbows at this step may make it more difficult to fill the pipe (Step 7); however,

they provide a positive stop to prevent the pipe from sliding through the well seal and disappearing

down the well.

Figure 10

6. Install the ejector in the well; install the well seal in the top of the well casing. Tighten the seal bolts to form a seal

with the casing and to clamp the nipples.

7 HOMEDEPOT.COM

Please contact 1-844-241-5521 for further assistance.

Installation (continued)

7. While holding the pipes SECURELY, fill them with water to make sure that the connections and check valve do not

leak (See Figure 11). The pipes should hold water. If they leak, remove the pipes and find the leak. Remake the

leaking joint with teflon tape or retighten the clamp. Repeat the installation and the fill-check until the pipes do

not leak.

Figure 11

8.Install adapters in the elbows and connect the horizontal offset piping to the pump. Connect the horizontal pipe as

needed. Teflon tape all threaded joints to prevent leaks!

9.See your pump owner’s manual for pump priming and operation instructions.

For warranty registration please go to www.gppumpsus.com

Questions, problems, missing parts? Before returning to the store call

Everbilt Customer Service

8 a.m. - 6 p.m., EST, Monday-Friday

1-844-241-5521

HOMEDEPOT.COM

GRACIAS!

Nosotros agradecemos la confianza que Usted ha puesto en Everbilt por la compra de esta paquete de surtidor. Nos

esforzamos continuamente para crear productos de calidad diseñados para mejorar su hogar. Visítenos en nuestra

página de internet para ver la línea completa de productos disponibles para las mejoras de su hogar. ¡Gracias por

escoger a Everbilt

SKU # 1001094001

Model # DPJC125

GUÍA DE USO Y DE

MANTENIMIENTO

Paquete de eyector para

pozo profundo con tubería doble

¿Preguntas, problemas, piezas que faltan? Antes de devolverla a la tienda,

llame a Servicio al Cliente de

8:00 AM a 6:00 pm EST de Lunes a Viernes.

1-844-241-5521

HOMEDEPOT.COM

Table Des matières

Table Des matières ............................10

INFORMACIÓN DE SEGURIDAD .......10

Pre-Montaje........................................10

ARMADO.............................................11

INSTALACIÓN.....................................13

INFORMACIÓN DE SEGURIDAD

Observe las instrucciones sobre seguridad contenidas en el Manual del Propietario de Antes de instalar el eyector

para pozo profundo, su bomba.

ASEGÚRESE que la bomba esté apagada y que toda la presión se haya liberado.

Pre-Montaje

APLICACIÓN

Este paquete de eyector para pozo profundo con tubería doble (Modelo DPJC125) incluye un eyector para pozo

profundo, una válvula de retención, filtro, adaptador para tubería de plástico y una selección de boquillas y venturis

para adaptarse a las condiciones de su pozo. Este conjunto de eyector ha sido diseñado para todos los usos de 4" y

mayores con tubería doble.

CONTENIDO DEL PAQUETE

Pieza Descripción Cantidad Pieza No.

A Venturi 1 c/u

J32P-18

J32P-24

Boquilla(#52)

(#51)

(#53)

1 c/u

J34P-42

J34P-41

J34P-43

C Cuerpo de

eyector 1 N40-92

D Válvula check 1 N212-12P

E Filtro 1 L8-1P

Adaptador para

tubería de

plástico

1 U11-104P

Inhaltsverzeichnis

Sprachen:

Andere Everbilt Wasserpumpe Handbücher

Everbilt

Everbilt THD1100 Bedienungsanleitung

Everbilt

Everbilt THD1095 Bedienungsanleitung

Everbilt

Everbilt ZE00804 Bedienungsanleitung

Everbilt

Everbilt 9236060 Bedienungsanleitung

Everbilt

Everbilt UT08804 Bedienungsanleitung

Everbilt

Everbilt 1001093932 Bedienungsanleitung

Everbilt

Everbilt EFLS15CI-HD Bedienungsanleitung

Everbilt

Everbilt UTA02510 Bedienungsanleitung

Everbilt

Everbilt SW07501T Bedienungsanleitung

Everbilt

Everbilt WG20 Bedienungsanleitung

Everbilt

Everbilt UT00801 Bedienungsanleitung

Everbilt

Everbilt EBAU33 Bedienungsanleitung

Everbilt

Everbilt HDEFR50W Bedienungsanleitung

Everbilt

Everbilt PCP10001-VSP Bedienungsanleitung

Everbilt

Everbilt CSP010 Bedienungsanleitung

Everbilt

Everbilt SBA025RP Bedienungsanleitung

Everbilt

Everbilt PUP63-HD Bedienungsanleitung

Everbilt

Everbilt THD1075 Bedienungsanleitung

Everbilt

Everbilt ZE00804 Bedienungsanleitung

Everbilt

Everbilt UTA02510 Bedienungsanleitung

Everbilt

Everbilt DP370C Bedienungsanleitung

Everbilt

Everbilt SP03302VD Bedienungsanleitung

Everbilt

Everbilt EFLS10-HD Bedienungsanleitung

Everbilt

Everbilt LTS250A Bedienungsanleitung

Beliebte Wasserpumpe Handbücher anderer Marken

Neptun

Neptun NPHW 5500 Bedienungsanleitung

Sensidyne

Sensidyne Gilian BDX-II Montage- und Bedienungsanleitung

Draper

Draper 47808 Bedienungsanleitung

Trolla

Trolla 12820 Bedienungsanleitung

Sunfab

Sunfab SVH Series Bedienungsanleitung

WilTec

WilTec 50740 Bedienungsanleitung

Fieldmann

Fieldmann FVC 5015 EK Bedienungsanleitung

Graco

Graco Husky 3300e Bedienungsanleitung

esotec

esotec 101018 Bedienungsanleitung

moyno

moyno 2000 CC Bedienungsanleitung

Becker

Becker BASIC VASF 2.80/1-0.AC230 Bedienungsanleitung

Sykes AmeriPumps

Sykes AmeriPumps GP100M Fehlerbehebungshandbuch

DUROMAX

DUROMAX XP WX Series Bedienungsanleitung

BRINKMANN PUMPS

BRINKMANN PUMPS SBF550 Bedienungsanleitung

Franklin Electric

Franklin Electric IPS Bedienungsanleitung

Xylem

Xylem e-1532 Series Bedienungsanleitung

Milton Roy

Milton Roy PRIMEROYAL Bedienungsanleitung

STA-RITE

STA-RITE ST33APP Bedienungsanleitung