EverFocus Eq250 Bedienungsanleitung

EVERFOCUS

1/3” Sony CCD Aluminum Box Housing

Color Camera

Operation Instructions

Model No. EQ350/EQ250

Please read this manual first for correct installation and operation. This manual should be retained

for future reference. The information in this manual was current when published. The

manufacturer reserves the right to revise and improve its products. All specifications are therefore

subject to change without notice.

PRECAUTIONS

1. Do not install the camera near electric or magnetic fields.

Install the camera away from TV, radio transmitter, magnet, electric motor, transformer,

audio speakers since the magnetic fields generate from above devices will distort the video

images.

2. Never disassemble the camera nor put impurities in it.

Disassembly or impurities may result in trouble or fire.

3. Never face the camera toward the sun.

Direct sunlight or severe ray may cause fatal damage to sensor and internal circuit.

4. Keep the power cord away from water and liquid.

Touching the wet power cord may result in electric shock.

5. Never install the camera in areas exposed to water, oil or gas.

Water, oil or gas may result in failure, electric shock or fire.

6. Cleaning

Do not touch the surface of sensor by hand directly. Use a soft cloth to remove the dirt from

the camera body. Use lens tissue or a cotton swab and ethanol to clean the sensor and the

camera lens.

7. Do not operate the camera beyond the specified temperature, humidity or

power source ratings.

Use the camera at temperatures within -10°C~50°C (14°F~122°F) and humidity between

20%~ 80%. The input power source are 12VDC/24VAC; 100~240VAC.

PREFACE

The EQ series is a solid-state color video camera specially designed for high quality surveillance

applications. It incorporates break through DSP technology that provides most reliable and

accurate color picture in security industry. The camera is compatible with C-mount or CS-mount

lenses and come with an easy back-focus adjustment for user-friendly installation.

FEATURES

Industry leading super high-res. with 560 TVL (EQ350 model), 380TVL(EQ250)

Revolutionary integrated 10-bit Digital Signal Processor (DSP) delivers sharp color images

and excellent picture quality

Wide range automatic electronic shutter: 1/60 (1/50) ~ 1/100,000

Auto line lock with external phase adjustment

C/mount or CS-mount adjustable with easy back-focus adjustment wheel on the camera

Smart FL mode for fluorescent light or 1/100 sec (NTSC)

Utilizing innovative Pure Vision Technology

STANDARD ACCESSORIES

¾Camera Unit x 1

¾Accessory Pack includes

Mounting Base for bracket

M2 Screws x 4 for fixing mounting base

Lens Plug Connector

¾Manual x 1

SPECIFICATIONS

Type EQ350 EQ250

Pickup Device 1/3'' SONY Super HAD CCD

Picture Elements NTSC: 768(H) x 494(V)

PAL: 752(H) x 582(V)

NTSC: 510(H) x 492(V)

PAL: 500(H) x 582(V)

Video Format NTSC or PAL

Scanning System NTSC: 525 TV lines, 60 fields/sec

PAL: 625 TV lines, 50 fields/sec

Horizontal Resolution 560TVL 380TVL

Sensitivity 0.5Lux/F=1.2 0.3Lux/F=1.2

S/N Ratio Over 48dB(AGC off)

Electronic Shutter 1/50(1/60)~1/100,000

Lens Type C/CS mount

Video Drive / Direct Drive

Back Light Comp. ON/OFF Switch

Auto Gain Control ON/OFF Switch

Fluorescent Light ON/OFF Switch

Auto White Balance Yes

Gamma Correction 0.45

Video Output BNC 1.0Vp-p , 75ohm

Sync. Mode Line Lock/Internal Sync

Power Source

2 types:

100VAC~240VAC

12VDC/24VAC

Power Consumption

100VAC~240VAC 12W max

24VAC 7W max

12VDC 4.5W max

Dimensions 57(W) X 51(H) X 140.2(D) mm;

2.25"(W) X 2"(H) X 5.52"(D)

Weight 0.5kg ; 1.1lbs

Operating Temperature -10°C~50°C ; 14°F~122°F (20%~80% Humidity)

Certification FCC,CE

DIMENSIONS

HARDWARE OVERVIEW

Front

Side

Back

Side

10 11

Dual Power Model with Audio

Pigtail Power Model with Audio

Pigtail Power Model without Audio Dual Power Model without Audio

1. C/CS mount Focus Switch Ring

Use this ring to adjust the appropriate focal length according to the type of lens. Rotate the

ring clockwise for the CS-mount lens, rotate it counterclockwise for the C-mount lens. The

factory setting is CS-mount.

2. Lens Mount

To mount an appropriate C-mount or CS-mount lens.

3. Locking Screw

Use the locking screw to fix the focal length for preventing losing focus.

4. DC Lens Connector (4 pin socket)

To connect to the lens plug of the auto iris lens.

5. Camera Setting DIP Switches

There are 6 DIP switches located on the sideboard, which are for camera setting. The

switches in order from top is Flickerless, Back Light Compensation, Electronic Shutter,

Automatic Gain Control, Line-Lock and Auto Iris Lens type. Please see camera DIP

switch setting section.

6. IRIS Level Control

Brightness Level can be adjusted from the IRIS level VR while using the direct drive lens.

Turn counterclockwise to L to get darker picture.

Turn clockwise to H to get brighter picture.

7. V-Phase Adjustment Screw

The vertical phase may require adjustment to synchronize the vertical phase of the camera

with other camera in the system when it is being used in the line-lock sync mode. Make the

adjustment when the vertical phase of the camera does not match with other cameras.

8. Mounting Base and Fixing Screws

The mounting base can be attached to either the top or the bottom of the camera, fix the

mounting base onto the camera by using the 4 fixing screws in the accessory pack.

9. Video Output Connector

BNC VBS 1.0 Vp-p, 75ohm

10. Power Cable (EQ series)

Power cable varies in different model

11. Power Pigtail Cable / Power Terminal Pin (EQ series ”A”)

It varies in different models.

12. Audio Output (optional)

It varies in different models, RCA connector

INSTALLATION

1. Remove the lens cover cap.

2. If a C-mount lens is used, please make sure to turn the C-mount/CS-mount focus switch ring

at C position before fixing the lens.The default is CS mount.

3. Screw the lens firmly onto the lens mount. Insert the lens plug into the DC lens connector if

the auto iris lens is used.

4. Tighten the focus locking screw.

5. Connect the video output of the camera to a color monitor or other video device through a 75

ohm type coaxial cable with BNC female connector.

6. Connect the Power.

7. Once the image appears on the monitor, adjust the focus and diaphragm of the lens to obtain

the best picture.

8. If the subject is not in focus when adjusting focus of lens, turn the C-mount/CS-mount focus

switch ring to do focal length adjustment as following:

i. Loosen the locking screw of the focal length adjustment ring.

ii. Take picture of subject at a distance more than 20m away from the camera.

iii. Rotate the focal length adjustment ring to bring the subject in focus.

iv. Tighten the locking screw while the adjustment is completed.

Camera Setting DIPSwitch

Fluorescent ON/OFF

This is a compensation function for against the images flicker fiercely during fluorescent light

condition. Shooting the images in fluorescent light by using turn on the Fluorescent function,

the default setting is Off.

BLC (Back Light Compensation) ON/OFF

When BLC is turned on, the AGC, ES and IRIS operating point is determined by averaging over

the center area instead of entire field-of-view, so that a dimly-lit foreground object at center area

can be clearly distinguished from brightly-lit backgrounds.

BLC should not be used unless it is needed to compensate for back-lit. The default setting is OFF.

ES (Electronic Shutter) OFF/ON

ES ON: The camera continuously adjusts the shutter speed from 1/60 (NTSC), 1/50 (PAL) second

to 1/100,000 second according to the luminance conditions of the scene.

ES OFF: The shutter speed is fixed at 1/60 (NTSC), 1/50 (PAL) second.

Set ES OFF, when auto iris lens is used or flicker is observed under a very bright fluorescent lamp.

Otherwise, turn ES on for optimum performance. The default setting is ON.

AGC (Automatic Gain Control) OFF/ON

AGC ON: The sensitivity increases automatically when light is low.

AGC OFF: A-low-noise picture is obtained under a low light condition.

The default setting is ON.

LL (Line-Lock) OFF/ON

To select the sync mode between Internal Sync.(LL off) and Line-Lock (LL on).

Set the line-lock off, the camera will synchronize to the internal time base. Set the line-lock on,

the camera’s vertical synchronization can be driven by the AC signal in the power lines.

Note: The cameras feature AC line lock for external synchronization, using the AC power

frequency (60Hz) is possible but not available in using DC or other operation power such as

NTSC in 50Hz or PAL in 60Hz power system.

VD/DD (Auto Iris lens Type)

For video drive auto iris lens, please set switch to VD. For direct drive iris lens, set switch to DD.

The default setting is DD. Wire the cable of lens to lens connector according to the following

table.

Pin1 Pin2 Pin3 Pin4 Lens Connector

Video Drive +12V GND VD-IRIS GND

DirectDrive Cnt- Cnt+ Drv+ Drv-

Andere Handbücher für Eq250

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere EverFocus Sicherheitskamera Handbücher

EverFocus

EverFocus EPTZ3602 Bedienungsanleitung

EverFocus

EverFocus ED310e Bedienungsanleitung

EverFocus

EverFocus EM-500NHP1 Bedienungsanleitung

EverFocus

EverFocus EZN268 Bedienungsanleitung

EverFocus

EverFocus EZ610 Bedienungsanleitung

EverFocus

EverFocus M107-N501-001 Bedienungsanleitung

EverFocus

EverFocus ECMD200 Technisches Handbuch

EverFocus

EverFocus ED610 Bedienungsanleitung

EverFocus

EverFocus ED350 Bedienungsanleitung

EverFocus

EverFocus M099-VDE101-002 Bedienungsanleitung

EverFocus

EverFocus EZA1540 eZ.HD Series Bedienungsanleitung

EverFocus

EverFocus EHD300/N-2 Bedienungsanleitung

EverFocus

EverFocus EZ632e Technisches Handbuch

EverFocus

EverFocus Polestar EZ550 Technisches Handbuch

EverFocus

EverFocus EHD525/EX-2 Bedienungsanleitung

EverFocus

EverFocus Eq250 Bedienungsanleitung

EverFocus

EverFocus EMW430 Bedienungsanleitung

EverFocus

EverFocus M122-EJ230-002 Bedienungsanleitung

EverFocus

EverFocus 1/3" B/W CCD Camera None Bedienungsanleitung

EverFocus

EverFocus ED350 Bedienungsanleitung

EverFocus

EverFocus eZ.HD Series Bedienungsanleitung

EverFocus

EverFocus EZA2580 eZ.HD Series Bedienungsanleitung

EverFocus

EverFocus EZH5040 Technisches Handbuch

EverFocus

EverFocus NeVio EAN850A Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung