evertz HD9155 Series Bedienungsanleitung
HD9155 and HD9155Q Series
High Definition
Production Afterburner
Instruction Manual
© Copyright 2001, 2002
EVERTZ MICROSYSTEMS LTD.
5288 John Lucas Drive, Burlington, Ontario, Canada, L7L 5Z9
Phone: 905-335-3700
Fax: 905-335-3573
Web Page: http://www.evertz.com
Version 1.3 September 2002
The material contained in this manual consists of information that is the property of Evertz Microsystems and is
intended solely for the use of purchasers of the HD9155 Series HD Production Afterburner. Evertz Microsystems
expressly prohibits the use of this manual for any purpose other than the operation of the device.
All rights reserved. No part of this publication may be reproduced without the express written permission of
Evertz Microsystems Ltd. Copies of this guide can be ordered from your Evertz products dealer or from Evertz
Microsystems.
USO RESTRITO
USO RESTRITO
INFORMATION TO USERS IN EUROPE
NOTE
CISPR 22 CLASS A DIGITAL DEVICE OR PERIPHERAL
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to the European Union EMC directive. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense.
INFORMATION TO USERS IN THE U.S.A.
NOTE
FCC CLASS A DIGITAL DEVICE OR PERIPHERAL
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense.
WARNING
Changes or Modifications not expressly approved by Evertz Microsystems Ltd. could void the
user’s authority to operate the equipment.
Use of unshielded plugs or cables may cause radiation interference. Properly shielded
interface cables with the shield connected to the chassis ground of the device must be used.
USO RESTRITO
USO RESTRITO
Model HD9155 Production Afterburner Manual
Revision 1.3
REVISION HISTORY
REVISION DESCRIPTION DATE
1.0 Original Version Oct 01
1.1 Added HD9155-AUD May 02
1.1.1 Updated Firmware upgrade instructions for AES and AUD versions Jun 02
1.2 Added HD9155Q and HD9155Q-AUD Jun 02
1.3 Updated Specifications Sep 02
USO RESTRITO
USO RESTRITO
Model HD9155 Production Afterburner Manual
CONTENTS Revision 1.3 i
TABLE OF CONTENTS
1. OVERVIEW.......................................................................................................................................... 1
1.1. HOW TO USE THIS MANUAL ................................................................................................... 2
2. INSTALLATION................................................................................................................................... 1
2.1. REAR PANEL OVERVIEW ........................................................................................................ 1
2.1.1. Downconverter Video Connections (Models HD9155, HD9155-AES, HD9155-AUD) .... 2
2.1.2. Downconverter Video Connections (Models HD9155Q, HD9155Q-AUD) ...................... 2
2.1.3. Audio De-Embedder Video Connections
(model HD9155-AES, HD9155-AUD and HD9155Q-AUD Only)..................................... 2
2.1.4. Video Recorder Timecode Connectors ........................................................................... 3
2.1.5. Parallel I/O Connections ................................................................................................. 4
2.1.6. Serial I/O Connections ....................................................................................................4
2.1.7. Power Connections .........................................................................................................6
2.2. MOUNTING................................................................................................................................. 6
2.3. POWER REQUIREMENTS......................................................................................................... 6
2.3.1. Changing the Fuses ........................................................................................................6
2.4. TYPICAL CONFIGURATIONS ................................................................................................... 7
2.5. CONNECTING THE VIDEO........................................................................................................9
2.5.1. Video Input and output ....................................................................................................9
2.6. CONNECTING THE VIDEO RECORDER TIME CODE ............................................................. 9
2.6.1. Connecting the Video LTC Reader ............................................................................... 10
2.6.2. Connecting the Video LTC Generator ........................................................................... 10
2.7. CONNECTING THE HD9155 TO A COMPUTER..................................................................... 10
2.7.1. Physical Connections .................................................................................................... 10
3. OPERATION........................................................................................................................................ 1
3.1. FRONT PANEL CONTROL........................................................................................................ 2
3.1.1. Controlling the Downconverter Mode .............................................................................. 3
3.1.2. Turning the Characters On and Off ................................................................................. 3
3.1.3. Loading the Factory Config or User Config ..................................................................... 3
3.1.4. Monitoring the Audio (models HD9155-AUD and HD9155Q-AUD only) ......................... 3
3.2. CONTROLLING THE 2:3 PULLDOWN...................................................................................... 4
4. CONFIGURATION USING 9150 CONFIGWARE™............................................................................ 1
4.1. CONNECTING THE HD9155 TO THE 9150 CONFIGWARE™ SOFTWARE............................ 1
4.1.1. Physical Connections ......................................................................................................1
4.1.2. Installing the 9150 Configware™ Utility........................................................................... 1
4.1.3. 9150 Configware™ Menus.............................................................................................. 2
4.1.3.1. File Menu ........................................................................................................... 2
4.1.3.2. Mode Menu ........................................................................................................ 3
4.1.3.3. Options Menu..................................................................................................... 3
USO RESTRITO
Model HD9155 Production Afterburner Manual
ii Revision 1.3 CONTENTS
4.1.3.4. Help Menu.......................................................................................................... 3
4.1.4. 9150 Configware™ Screens ........................................................................................... 4
4.1.4.1. Inputs Screen..................................................................................................... 4
4.1.4.2. Outputs Screen .................................................................................................. 5
4.1.4.3. Windows Screen ................................................................................................ 6
4.1.4.4. Parameters Screen ............................................................................................ 7
5. SYSTEM PARAMETERS .................................................................................................................... 1
5.1. 9155 PARALLEL I/O PIN FUNCTIONS ..................................................................................... 2
6. TECHNICAL DESCRIPTION............................................................................................................... 1
6.1. SPECIFICATIONS ...................................................................................................................... 1
6.1.1. HDTV Serial Digital Video Input ...................................................................................... 1
6.1.2. SDTV Serial Digital Video Output.................................................................................... 1
6.1.3. Analog Monitor Video Output .......................................................................................... 1
6.1.4. LTC Generator ................................................................................................................ 2
6.1.5. LTC Reader..................................................................................................................... 2
6.1.6. Ancillary Timecode Reader ............................................................................................. 2
6.1.7. Serial Communications ................................................................................................... 2
6.1.8. Physical ........................................................................................................................... 2
6.1.9. Electrical.......................................................................................................................... 2
6.2. DIP SWITCHES .......................................................................................................................... 3
6.3. UPGRADING THE FIRMWARE ................................................................................................. 3
6.3.1. Step 1 – Configuring the unit for Firmware upgrades...................................................... 3
6.3.2. Step 2 – Terminal program Setup ................................................................................... 3
6.3.3. Step 3 – Uploading the new firmware ............................................................................. 5
6.3.4. Step 4 – Completing the Upgrade ................................................................................... 5
6.4. DEBUG WINDOW FUNCTIONS ................................................................................................ 6
6.4.0. WIN HW (0) Hardware Display....................................................................................... 7
6.4.1. WIN TFPHASE (1) Timecode to film phase indicator..................................................... 7
6.4.2. WIN TFPHASERR (2) Timecode to film phase error indicator....................................... 7
6.4.3. WIN VFLD2 (3) Video Field 2......................................................................................... 7
6.4.4. WIN VPULL (4) Video Pulldown..................................................................................... 7
6.4.5. WIN F0 (5) KeyKode Frames 0 ...................................................................................... 7
6.4.6. WIN V0 (6) Video Timecode Frames 0 .......................................................................... 7
6.4.7. WIN A0 (7) Audio Timecode Frames 0 .......................................................................... 7
6.4.8. WIN VAPHASE (8) Timebase Phase ............................................................................. 8
6.4.9. WIN PULLT (9) Pulldown Type ...................................................................................... 8
6.4.10. WIN ILTC (10) LTC Reader Input Data .......................................................................... 8
6.4.11. WIN REF (11) Pulldown Reference Source Indicator .................................................... 8
6.4.12. WIN VIDEO (12) Video Mode Indicator.......................................................................... 8
6.4.13. WIN ANC VTR (13) ANC Video timecode...................................................................... 9
6.4.14. WIN ANC ATR (14) ANC Audio timecode...................................................................... 9
6.4.15. WIN MODES (15) RP215 Film ANC encoded information............................................. 9
6.4.16. WIN ERRS (16) Pop up errors ....................................................................................... 9
6.4.17. WIN IDLE (17) Processor Idle Measurement ................................................................. 9
6.4.18. WIN DLO (18) Data Logging Output ............................................................................ 10
6.4.19. WIN GPI (19) GPI input frame number ........................................................................ 10
6.4.20. WIN PRESET STS (20) Preset status.......................................................................... 10
USO RESTRITO
Model HD9155 Production Afterburner Manual
CONTENTS Revision 1.3 iii
6.4.21. WIN OP1 STS (21) Output 1 - Parallel Connector Pin 9 status .................................. 10
6.4.22. WIN OP2 STS (22) Output 2 - Parallel Connector Pin 5 status ................................... 10
6.4.23. WIN SLTC (23) Smoothed LTC Stats .......................................................................... 11
6.4.24. WIN REV (24) Firmware Revision................................................................................ 11
6.4.25. WIN RAM (always the last display) Ram Display......................................................... 11
Figures
Figure 2-1: HD9155 Rear Panel............................................................................................................................1
Figure 2-2: HD9155-AES Rear Panel ...................................................................................................................1
Figure 2-3: HD9155-AUD Rear Panel...................................................................................................................1
Figure 2-4: HD9155Q Rear Panel .........................................................................................................................1
Figure 2-5: HD9155Q-AUD Rear Panel ................................................................................................................1
Figure 2-6: Typical Configuration “On the Set” .....................................................................................................7
Figure 2-7: Typical Configuration in the Studio .....................................................................................................8
Figure 2-8: Cable to Connect HD9155 to PC Communications Port ..................................................................11
Figure 3-1: 2:3 Pulldown Cadence For Converting 1080p/24sf Video To 525i/60................................................2
Figure 3-2: Front Panel HD9155 and HD9155Q ...................................................................................................2
Figure 3-3: Front Panel HD9155-AES...................................................................................................................2
Figure 3-4: Front Panel HD9155-AUD and HD9155Q-AUD .................................................................................2
Figure 3-5: Timecode Referenced 2:3 Pulldown and Delay in HD9155 ...............................................................4
Figure 4-1: Cable to Connect HD9155 to PC Communications Port ....................................................................1
Tables
Table 2-1: WA-2EV Audio Breakout Cable ...........................................................................................................3
Table 2-2: Parallel I/O Connector Default Pin Definitions .....................................................................................4
Table 2-3: Serial Control Connector Pin Definitions..............................................................................................5
Table 2-4: Aux I/O Connector Pin Definitions .......................................................................................................5
Table 2-5: De-Embedder COM Connector Pin Definitions ...................................................................................6
Table 2-6: Video Input Formats.............................................................................................................................9
Table 5-1: Class 0 - Global System Parameters HD9155's ..................................................................................1
Table 5-2: Class 15 - 9155 System Parameters ...................................................................................................1
Table 5-3: Default 9155 I/O Pin Functions ............................................................................................................2
Table 5-4: Alternate 9155 Input Pin Functions......................................................................................................2
Table 5-5: Alternate 9155 Output Pin Functions ...................................................................................................3
Table 6-1: DIP Switch Functions ...........................................................................................................................3
Table 2: Typical File names ..................................................................................................................................5
Table 6-3: Debug Window Functions ....................................................................................................................6
USO RESTRITO
Model HD9155 Production Afterburner Manual
iv Revision 1.3 CONTENTS
This page left intentionally blank
USO RESTRITO
Dieses Handbuch passt für folgende Modelle
6
Inhaltsverzeichnis
Andere evertz E/A-System Handbücher
Beliebte E/A-System Handbücher anderer Marken
WAGO
WAGO 750-344 Bedienungsanleitung
Teknim
Teknim TWM-1887 Bedienungsanleitung
Intelligent Appliance
Intelligent Appliance IA-2662-E Bedienungsanleitung
BERGHOF
BERGHOF ECC DIO 16/16 Bedienungsanleitung
Advantech
Advantech PCM-27J3AU Installations- und Betriebshandbuch
Festo
Festo CP-E08-M12-CL Bedienungsanleitung
