Evertz 7700 Series Bedienungsanleitung

7700 Multi-Frame Manual

7707EO-HD SD/HD Re-Clocking Electrical to Fiber Converter

Revision 1.5

TABLE OF CONTENTS

1. OVERVIEW.......................................................................................................................................... 1

2. INSTALLATION................................................................................................................................... 3

2.1. SERIAL DIGITAL COAXIAL CONNECTIONS ........................................................................... 3

2.2. OPTICAL CONNECTIONS......................................................................................................... 4

2.3. CARE AND HANDLING OF OPTICAL FIBER............................................................................ 4

2.3.1. Safety.............................................................................................................................. 4

2.3.2. Assembly......................................................................................................................... 4

2.3.3. Labeling........................................................................................................................... 5

2.3.4. Handling and Connecting Fibers..................................................................................... 5

3. SPECIFICATIONS............................................................................................................................... 6

3.1. SERIAL VIDEO INPUT ............................................................................................................... 6

3.2. SERIAL VIDEO OUTPUTS......................................................................................................... 6

3.3. OPTICAL OUTPUT..................................................................................................................... 6

3.4. ELECTRICAL ............................................................................................................................. 7

3.5. COMPLIANCE............................................................................................................................ 7

3.6. PHYSICAL.................................................................................................................................. 7

4. STATUS INDICATORS AND DISPLAYS ........................................................................................... 8

4.1. STATUS INDICATOR LEDS....................................................................................................... 8

4.2. DOT-MATRIX DISPLAY............................................................................................................. 9

4.2.1. Displaying The Equalization Strength............................................................................. 9

4.2.2. Displaying the EDH Errors .............................................................................................. 9

4.2.3. Displaying the Video Standard...................................................................................... 10

5. JUMPERS AND LOCAL CONTROLS .............................................................................................. 11

5.1. SELECTING THE RECLOCKING MODE................................................................................. 11

5.2. SELECTING THE RECLOCKING RATE.................................................................................. 11

5.3. SELECTING WHETHER LOCAL FAULTS WILL BE MONITORED

BY THE GLOBAL FRAME STATUS ........................................................................................ 11

7700 Multi-Frame Manual

7707EO-HD SD/HD Re-Clocking Electrical to Fiber Converter

Revision 1.5

5.4. SELECTING WHETHER THE MODULE WILL BE CONTROLLED FROM THE

LOCAL CONTROLS OR THROUGH THE VISTALINK®INTERFACE ...................................... 12

5.5. CONFIGURING THE MODULE FOR FIRMWARE UPGRADES.............................................. 12

6. VISTALINK®REMOTE MONITORING/CONTROL........................................................................... 13

6.1. WHAT IS VISTALINK®?.............................................................................................................. 13

6.2. VISTALINK®MONITORED PARAMETERS .............................................................................. 13

6.3. VISTALINK®CONTROLLED PARAMETERS ........................................................................... 14

6.4. VISTALINK®TRAPS.................................................................................................................. 14

Figures

Figure 1-1: 7707EO-HD Block Diagram................................................................................................................2

Figure 2-1: 7707EO-HD Rear Panel.....................................................................................................................3

Figure 2-2: Reproduction of Laser Certification and Identification Label..............................................................5

Figure 4-1: Location of Status Indicators and Jumpers ........................................................................................8

Tables

Table 6-1: VistaLINK®Monitored Parameters.....................................................................................................13

Table 6-2: VistaLINK®Controlled Parameters....................................................................................................14

Table 6-3: VistaLINK®Traps...............................................................................................................................14

7700 Multi-Frame Manual

7707EO-HD SD/HD Re-Clocking Electrical to Fiber Converter

Revision 1.5

REVISION HISTORY

REVISION DESCRIPTION DATE

1.0 Original Version Nov 01

1.1 Updated Figure 3, status indicator and jumper descriptions Feb 02

1.2 Added 8 new CWDM wavelengths Dec 02

1.3 Laser & carrier faults updated June 03

1.3.1 Added information about DVB-ASI compliant outputs Aug 03

1.3.2 Corrected Figure 3 Oct 03

1.3.3 Updated VistaLINK®monitored parameters, controlled parameters and traps Sep 04

1.4 Updated safety section and added assembly and labeling sections Aug 05

1.4.1 Added Jumper information in Section 5.2 Apr 07

1.5 Updated features and specs Nov 08

Information contained in this manual is believed to be accurate and reliable. However, Evertz assumes no responsibility for the use thereof nor for

the rights of third parties, which may be effected in any way by the use thereof. Any representations in this document concerning performance of

Evertz products are for informational use only and are not warranties of future performance, either express or implied. The only warranty offered by

Evertz in relation to this product is the Evertz standard limited warranty, stated in the sales contract or order confirmation form.

Although every attempt has been made to accurately describe the features, installation and operation of this product in this manual, no warranty is

granted nor liability assumed in relation to any errors or omissions unless specifically undertaken in the Evertz sales contract or order confirmation.

Information contained in this manual is periodically updated and changes will be incorporated into subsequent editions. If you encounter an error,

please notify Evertz Customer Service department. Evertz reserves the right, without notice or liability, to make changes in equipment design or

specifications.

7700 Multi-Frame Manual

7707EO-HD SD/HD Re-Clocking Electrical to Fiber Converter

Revision 1.5

WARNING

Never look directly into an optical fiber. Non-reversible damage to the eye can

occur in a matter of milliseconds.

Do not hook up the 7707EO-HD DWDM cards directly with a short fiber optic

cable. The 7707EO-HD DWDM cards produce +7dBm of power which will

damage the receiver if connected directly.

Do not hook up the 7707EO-HD cards that output more than -7dBm of power (see

7707EO-HD specifications for output power of various laser types) and 7707OE-

HD-H high sensitivity receiver cards directly with a short fiber optic cable. The

7707EO-HD cards that produce more than -7dBm of power will damage the

receiver if connected directly.

7700 Multi-Frame Manual

7707EO-HD SD/HD Re-Clocking Electrical to Fiber Converter

Revision 1.5 7707EO-HD - 1

1. OVERVIEW

The 7707EO-HD is a VistaLINK®enabled, electrical to optical converter for SMPTE 292M (1.485Gb/s),

SMPTE 259M (143-360Mb/s), SMPTE 344M (540Mb/s), DVB-ASI (270Mb/s) and SMPTE 310M

(19.4Mb/s) signals. Monitoring and control of card status and parameters is provided locally at the card

edge, and remotely via VistaLINK®capability. The 7707EO-HD accepts one coaxial SDI input, and

provides one reclocked fiber output and two reclocked coaxial SDI outputs.

The fiber output is available in an assortment of optical wavelengths, accommodating standard, CWDM

transmission schemes. (See Specifications for complete information)

7707EO13-HD 1310 nm FP -7dBm output, suitable for distances up to 50 Km

7707EO13-HD-L 1310 nm DFB 0dBm output, suitable for distances up to 75 Km

7707EO15-HD 1550 nm DFB 0dBm output, suitable for distances up to 75 Km

There are several versions with built in isolators specifically suited to coarse wave division multiplexing

(CWDM) applications. These versions all have 0dBm output and are suitable for distances up to 75 Km.

7707EO27-HD 1270 nm DFB

7707EO29-HD 1290 nm DFB

7707EO31-HD 1310 nm DFB

7707EO33-HD 1330 nm DFB

7707EO35-HD 1350 nm DFB

7707EO37-HD 1370 nm DFB

7707EO43-HD 1430 nm DFB

7707EO45-HD 1450 nm DFB

7707EO47-HD 1470 nm DFB

7707EO49-HD 1490 nm DFB

7707EO51-HD 1510 nm DFB

7707EO53-HD 1530 nm DFB

7707EO55-HD 1550 nm DFB

7707EO57-HD 1570 nm DFB

7707EO59-HD 1590 nm DFB

7707EO61-HD 1610 nm DFB

There are several versions with built in isolators specifically suited to dense wave division multiplexing

(DWDM) applications. The DWDM versions are suitable for distances >50 Km @ 1.5 Gb/s (for DWDM

applications contact factory).

7707EODyyy-HD DWDM DFB laser output, yyy – ITU channel number

The 7707EO-HD occupies one card slot and can be housed in either a 1RU frame, which will hold up to

three modules, or a 3 RU frame, which will hold up to 15 modules.

7700 Multi-Frame Manual

7707EO-HD SD/HD Re-Clocking Electrical to Fiber Converter

7707EO-HD - 2 Revision 1.5

Features:

•Supports all SMPTE 292M standards at 1.485Gb/s

•Supports all SMPTE 259M standards with operation from 143Mb/s-360Mb/s

•Supports SMPTE 310M (19.4Mb/s), M2S or DVB-ASI (270Mb/s), SMPTE 344M (540Mb/s), and

SMPTE 305M (SDTi) rates

•Auto rate selection, indication and reclocking for all SDI and HD-SDI data rates from 143Mb/s to

1.485Gb/s

•Selectable non-reclock mode for other data rates

•Detection and display of equalization strength, video format, and EDH errors (SDI only)

•Automatic coaxial input equalization to 150m for all rates to 1.485Gb/s (Belden 1694A)

•DWDM wavelengths (ITU-T G.694.1 compliant) also available

•Optical output wavelengths of 1310nm, 1550nm, and up to sixteen CWDM wavelengths (ITU-T

G.694.2 compliant)

•Supports single-mode and multi-mode fiber optic cable

•Fully hot-swappable from front of frame

•Comprehensive signal and card status monitoring via four digit card edge display or remotely

through SNMP and VistaLINK®

•Can be housed in either a 1RU frame which will hold up to 3 modules, a 3RU frame which will hold

up to 15 modules, 3RU portable frame that holds up to 7 modules or a standalone frame which will

hold 1 module

•VistaLINK® capability is available when modules are used with the 3RU 7700FR-C or 350FR

portable frame and a 7700FC VistaLINK® Frame Controller module in slot 1 of the frame

ADAPTIVE

EQUALIZATION

RECLOCKING

SMPTE 292M

SMPTE 259M

SMPTE 344M

SMPTE 305M

SMPTE 310M

DVB-ASI

CONTROL/

INDICATION

VistaLINK

Interface

LOCAL

CONTROL

LOCAL

INDICATION

SERIAL

INPUT

OPTICAL

OUTPUT

SERIAL

OUTPUT

OPTICAL

DRIVER

SERIAL

OUTPUT

CABLE

DRIVERS

Figure 1-1: 7707EO-HD Block Diagram

7700 Multi-Frame Manual

7707EO-HD SD/HD Re-Clocking Electrical to Fiber Converter

Revision 1.5 7707EO-HD - 3

2. INSTALLATION

The 7707EO-HD comes with a companion rear plate that has three BNC connectors and one SC/PC

(shown), ST/PC or FC/PC optical connector. For information on mounting the rear plate and inserting the

module into the frame see section 3 of the 7700FR chapter.

Figure 2-1: 7707EO-HD Rear Panel

2.1. SERIAL DIGITAL COAXIAL CONNECTIONS

HD INPUT: Input BNC connector for 10-bit serial digital video signals compatible with SMPTE 292M,

SMPTE 259M, SMPTE 344M, DVB-ASI or SMPTE 310M standards. This input provides

adaptive compensation for up to 125m of industry standard Belden 1694A cable at rates to

1.485Gb/s.

HD OUTPUT: There are two BNC connectors with serial component video outputs, compatible with

SMPTE 292M, SMPTE 259M, SMPTE 344M, DVB-ASI or SMPTE 310M standards.

Reclocking is provided or may be disabled by the user in Non-Reclock mode. The HD

Output marked D (the bottom output BNC) maintains the same polarity as the input and is

DVB-ASI compliant.

7700 Multi-Frame Manual

7707EO-HD SD/HD Re-Clocking Electrical to Fiber Converter

7707EO-HD - 4 Revision 1.5

2.2. OPTICAL CONNECTIONS

HD OUTPUT: There is one SC/PC (shown), ST/PC or FC/PC female connector with the video output

converted to an optical signal as specified in section 3.3. The optical output laser is

enabled only while a valid input signal is detected which is indicated by the SIGNAL VALID

LED.

This optical output is available in 1310nm, 1550nm, up to sixteen CWDM wavelengths

(ITU-T G.694.2 compliant) and up to 40 DWDM wavelengths (ITU-T G.694.1 compliant).

The output wavelength is marked on the rear panel of each module. When connected

directly to a companion module, the output is compatible with multi-mode fiber optic cable.

If not connected directly (i.e. connected through CWDM, DWDM, WDM, or

splitter/combiner) the output is compatible only with single-mode fiber optic cable.

Do not hook up the 7707EO-HD DWDM cards directly with a short fiber optic

cable. The 7707EO-HD DWDM cards produce +7dBm of power, which will

damage the receiver if connected directly.

Do not hook up the 7707EO-HD cards that output more than -7dBm of power

(see 7707EO-HD specifications for output power of various laser types) and

7707OE-HD-H high sensitivity receiver cards directly with a short fiber optic

cable. The 7707EO-HD cards that produce more than -7dBm of power will

damage the receiver if connected directly.

2.3. CARE AND HANDLING OF OPTICAL FIBER

2.3.1. Safety

CLASS 1 LASER PRODUCT

Background colour: yellow

Triangular band: black

Symbol: black

2.3.2. Assembly

Assembly or repair of the laser sub-module is done only at the Evertz facility and performed only by

qualified Evertz technical personnel.

7700 Multi-Frame Manual

7707EO-HD SD/HD Re-Clocking Electrical to Fiber Converter

Revision 1.5 7707EO-HD - 5

2.3.3. Labeling

Certification and Identification labels are combined into one label. As there is not enough room on the

product to place the label it is reproduced here in the manuals.

•There is no date of manufacture on this label as it can be traced by bar code label placed on the

Printed circuit board of each Evertz plug-in module

•The Model number is one of: 7707EO13-HD, 7707EO13-HD-L, 7707EO15-HD,

7707EOxx-HD, (xx = 27, 29, 31, 33, 35, 37, 43, 45, 47, 49, 51, 53, 55, 57, 59, 61)

7707EODyyy-HD (Dyyy represents ITU Grid Channel: D200, D210, D220, D230, D240, D250,

D260, D270, D280, D290, D300, D310, D320, D330, D340, D350, D360, D370, D380, D390,

D400, D410, D420, D430, D440, D450, D460, D470, D480, D490, D500, D510, D520, D530,

D540, D550, D570, D580, D590, D600)

Figure 2-2: Reproduction of Laser Certification and Identification Label

2.3.4. Handling and Connecting Fibers

Never touch the end face of an optical fiber. Always keep dust caps on optical fiber

connectors when not connected and always remember to properly clean the optical

end face of a connector before making a connection.

The transmission characteristics of the fiber are dependent on the shape of the optical core and therefore

care must be taken to prevent fiber damage due to heavy objects or abrupt fiber bending. Evertz

recommends that you maintain a minimum bending radius of 5 cm to avoid fiber-bending loss that will

decrease the maximum attainable distance of the fiber cable. The Evertz fiber optic modules come with

cable lockout devices, to prevent the user from damaging the fiber by installing a module into a slot in the

frame that does not have a suitable I/O module. For further information about care and handling of fiber

optic cable see section 3 of the Fiber Optics System Design section of this manual binder.

7700 Multi-Frame Manual

7707EO-HD SD/HD Re-Clocking Electrical to Fiber Converter

7707EO-HD - 6 Revision 1.5

3. SPECIFICATIONS

3.1. SERIAL VIDEO INPUT

Standards:

Reclocked: SMPTE 292M, SMPTE 259M A, B, C, D, SMPTE 344M, SMPTE 305M, DVB-ASI,

M2S, SMPTE 310M

Non-Reclocked: Any bi-level signal type at rates of 19.4 – 1.485Gb/s

Connector: 1 BNC input per IEC 61169-8, Annex A

Equalization: Automatic to 150m @ 1.485Gb/s with Belden 1694A or equivalent cable

Return Loss: > 15dB to 1.5GHz

3.2. SERIAL VIDEO OUTPUTS

Number of Outputs: 2 Per Card

1 output maintains polarity from input to output for DVB-ASI applications.

Connector: BNC per IEC 61169-8, Annex A

Signal Level: 800mV ±80mV

DC Offset: 0V ±0.5V

Rise and Fall Time: <270ps

Overshoot: <10% of amplitude

Return Loss: >12dB to 1.5Ghz

Wide Band Jitter: < 0.2UI (Reclocked)

3.3. OPTICAL OUTPUT

Standard: SMPTE 297M

Number of Outputs: 1

Connector: Female SC/PC, ST/PC or FC/PC

Return Loss: > 14dB

Rise and Fall Time: < 270ps

Wide Band Jitter: < 0.2UI (Reclocked).

Fiber Size: 9 µm core / 125 µm overall

Wavelengths:

Standard: 1310nm, 1550nm (nominal)

CWDM: 1270nm to 1610nm (ITU-T G.694.2 compliant)

DWDM: ITU channel 20 to 60, 100GHz spacing, (ITU-T G.694.1 compliant)

Output Power:

1310nm FP (Standard) -7dBm ± 1dBm

1310nm DFB (L Version) 0dBm ± 1dBm

1550nm & CWDM DFB 0dBm ± 1dBm

DWDM DFB +7dBm ± 1dB

Andere Handbücher für 7700 Series

127

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere evertz Medienkonverter Handbücher

evertz

evertz 570J2K-HW-X19 Bedienungsanleitung

evertz

evertz 8950-SID Bedienungsanleitung

evertz

evertz 8074 Bedienungsanleitung

evertz

evertz 7700 Series Bedienungsanleitung

evertz

evertz 2430GDAC Bedienungsanleitung

evertz

evertz 7882J2KX-IPASI Bedienungsanleitung

evertz

evertz 2405OE Bedienungsanleitung

evertz

evertz 7700 Series Bedienungsanleitung

evertz

evertz 2430RX2-10G Series Bedienungsanleitung

evertz

evertz 7700 Series Bedienungsanleitung

evertz

evertz 7700 MultiFrame Bedienungsanleitung

evertz

evertz A-2410MD Bedienungsanleitung

evertz

evertz 7705OE-3 Bedienungsanleitung

evertz

evertz 7700 Series Bedienungsanleitung

evertz

evertz 400FR Bedienungsanleitung

evertz

evertz 7721AE4-B-HD Bedienungsanleitung

evertz

evertz 2405OE-HD Bedienungsanleitung

evertz

evertz HD9510UC Bedienungsanleitung

evertz

evertz VistaLINK 7700 MultiFrame Bedienungsanleitung

evertz

evertz 7700 Series Bedienungsanleitung

evertz

evertz 7721AE4-HD Bedienungsanleitung

evertz

evertz 2430GDAC-WARP Bedienungsanleitung

evertz

evertz HD2014 Bedienungsanleitung

evertz

evertz 5782DEC Bedienungsanleitung

Beliebte Medienkonverter Handbücher anderer Marken

SoundTraxx

SoundTraxx Blunami BLU-2200 Bedienungsanleitung

SPROLINK

SPROLINK VA1 Bedienungsanleitung

Acclaim Lighting

Acclaim Lighting DDC-1-AC Bedienungsanleitung

Nikon

Nikon AF-S TC-20E III Bedienungsanleitung

Axis

Axis AXIS Q7406 Bedienungsanleitung

Omega

Omega TAC80B-J Bedienungsanleitung

Zoom

Zoom Thunderbolt TAC-2R Bedienungsanleitung

OST

OST iConverter 10/100M Bedienungsanleitung

Vertiv

Vertiv Netsure Bedienungsanleitung

birddog

birddog MINI Bedienungsanleitung

Roland

Roland GI-10 Bedienungsanleitung

Wallenstein

Wallenstein WX310 Bedienungsanleitung

Pace

Pace MSS 200-1 Bedienungsanleitung

Solar Converters

Solar Converters EQ 12/24-50 Bedienungsanleitung

CYP

CYP EL-7400V Bedienungsanleitung

TIE

TIE MIDI 1i1o Bedienungsanleitung

DCS

DCS Vivaldi Upsampler Bedienungsanleitung

Westermo

Westermo MCW-211 SERIES Bedienungsanleitung