Evertz 7707EO-3G Bedienungsanleitung

7700 Multi-Frame Manual

7707EO-3G 3G/HD/SDI Re-Clocking Electrical to Optical Converter

Revision 1.1

TABLE OF CONTENTS

1. OVERVIEW.......................................................................................................................................... 1

2. INSTALLATION................................................................................................................................... 3

2.1. ELECTRICAL SIGNAL CONNECTIONS.................................................................................... 3

2.2. OPTICAL CONNECTIONS......................................................................................................... 4

2.3. CARE AND HANDLING OF OPTICAL FIBER............................................................................ 5

2.3.1. Safety.............................................................................................................................. 5

2.3.2. Assembly......................................................................................................................... 5

2.3.3. Labeling........................................................................................................................... 5

2.3.4. Handling and Connecting Fibers..................................................................................... 6

3. SPECIFICATIONS............................................................................................................................... 7

3.1. SERIAL VIDEO INPUT ............................................................................................................... 7

3.2. SERIAL VIDEO OUTPUTS......................................................................................................... 7

3.3. OPTICAL OUTPUT..................................................................................................................... 7

3.4. GENERAL PURPOSE OUTPUTS.............................................................................................. 8

3.5. ELECTRICAL ............................................................................................................................. 8

3.6. COMPLIANCE............................................................................................................................ 8

3.7. PHYSICAL.................................................................................................................................. 8

4. STATUS INDICATORS AND DISPLAYS ........................................................................................... 9

4.1. STATUS INDICATOR LEDS....................................................................................................... 9

4.2. DOT-MATRIX DISPLAY............................................................................................................. 9

4.2.1. Displaying the Video Rate............................................................................................. 10

4.2.2. Displaying the Software Version................................................................................... 11

4.2.3. Selecting the Output Video Rate................................................................................... 11

4.2.4. Selecting the Output Laser Enable Mode...................................................................... 11

4.2.5. Selecting GPO Triggers................................................................................................ 12

4.2.6. Selecting GPO Polarity.................................................................................................. 12

4.2.7. Selecting the Orientation of the Display........................................................................ 12

4.2.8. Selecting the Factory Reset Configuration.................................................................... 13

5. JUMPERS AND LOCAL CONTROLS .............................................................................................. 14

7700 Multi-Frame Manual

7707EO-3G 3G/HD/SDI Re-Clocking Electrical to Optical Converter

Revision 1.1

5.1. SELECTING WHETHER LOCAL FAULTS WILL BE MONITORED

BY THE GLOBAL FRAME STATUS ........................................................................................ 14

5.2. CONFIGURING THE MODULE FOR FIRMWARE UPGRADES.............................................. 14

6. VISTALINK®REMOTE MONITORING/CONTROL........................................................................... 15

6.1. WHAT IS VISTALINK®?.............................................................................................................. 15

6.2. VISTALINK®MONITORED PARAMETERS .............................................................................. 15

6.3. VISTALINK®CONTROLLED PARAMETERS ........................................................................... 16

6.4. VISTALINK®TRAPS.................................................................................................................. 16

Figures

Figure 1-1: 7707EO-3G Block Diagram................................................................................................................2

Figure 2-1: 7707EO-3G Rear Panel......................................................................................................................3

Figure 2-2: General Purpose Output.....................................................................................................................4

Figure 2-3: Reproduction of Laser Certification and Identification Label..............................................................5

Figure 4-1: Status Indicator and Jumper Locations..............................................................................................9

Figure 4-2: 7707EO-3G Card-edge Menu Quick Reference ..............................................................................10

Tables

Table 5-1: VistaLINK®Monitored Parameters.....................................................................................................15

Table 5-2: VistaLINK®Controlled Parameters....................................................................................................16

Table 5-3: VistaLINK®Traps...............................................................................................................................16

7700 Multi-Frame Manual

7707EO-3G 3G/HD/SDI Re-Clocking Electrical to Optical Converter

Revision 1.1

REVISION HISTORY

REVISION DESCRIPTION DATE

1.0 Original Version May 09

1.1 Added GPO Menu Item Oct 09

Information contained in this manual is believed to be accurate and reliable. However, Evertz assumes no responsibility for the use thereof nor for

the rights of third parties, which may be affected in any way by the use thereof. Any representations in this document concerning performance of

Evertz products are for informational use only and are not warranties of future performance, either expressed or implied. The only warranty offered

by Evertz in relation to this product is the Evertz standard limited warranty, stated in the sales contract or order confirmation form.

Although every attempt has been made to accurately describe the features, installation and operation of this product in this manual, no warranty is

granted nor liability assumed in relation to any errors or omissions unless specifically undertaken in the Evertz sales contract or order confirmation.

Information contained in this manual is periodically updated and changes will be incorporated into subsequent editions. If you encounter an error,

please notify Evertz Customer Service department. Evertz reserves the right, without notice or liability, to make changes in equipment design or

specifications.

7700 Multi-Frame Manual

7707EO-3G 3G/HD/SDI Re-Clocking Electrical to Optical Converter

Revision 1.1

WARNING

Never look directly into an optical fiber. Non-reversible damage to the eye can

occur in a matter of milliseconds.

Do not hook up the 7707EO-3G DWDM cards directly with a short fiber optic

cable. The 7707EO-3G DWDM cards produce +7dBm of power which will

damage the receiver if connected directly.

Do not hook up the 7707EO-3G cards that output more than -7dBm of power

(see 7707EO-3G specifications for output power of various laser types) and

7707OE-3G-H high sensitivity receiver cards directly with a short fiber optic

cable. The 7707EO-3G cards that produce more than -7dBm of power will

damage the receiver if connected directly.

7700 Multi-Frame Manual

7707EO-3G 3G/HD/SDI Re-Clocking Electrical to Optical Converter

Revision 1.1 Page-1

1. OVERVIEW

The 7707EO-3G is a VistaLINK®enabled, electrical to optical converter for SMPTE 424M (2.97Gb/s),

SMPTE 292M (1.485Gb/s), SMPTE 259M-C (270Mb/s), SMPTE 305M (SDTi), and DVB-ASI (270Mb/s)

signals. Monitoring and control of card status and parameters is provided locally at the card edge, and

remotely via VistaLINK®capability. The 7707EO-3G accepts one coaxial SDI input, and provides one

reclocked fiber output and two reclocked coaxial SDI outputs. Also, the 7707EO-3G provides one user

selectable GPO.

The fiber output is available in an assortment of optical wavelengths, accommodating standard, CWDM, or

DWDM transmission schemes. (See Specifications, section 3, for complete information).

7707EO13-3G 1310 nm FP -7dBm output, suitable for distances up to 50 Km

7707EO15-3G 1550 nm DFB 0dBm output, suitable for distances up to 75 Km

There are several versions with built in isolators specifically suited to coarse wave division multiplexing

(CWDM) applications. These versions all have 0dBm output and are suitable for distances up to 75 Km.

7707EO27-3G 1270 nm DFB

7707EO29-3G 1290 nm DFB

7707EO31-3G 1310 nm DFB

7707EO33-3G 1330 nm DFB

7707EO35-3G 1350 nm DFB

7707EO37-3G 1370 nm DFB

7707EO43-3G 1430 nm DFB

7707EO45-3G 1450 nm DFB

7707EO47-3G 1470 nm DFB

7707EO49-3G 1490 nm DFB

7707EO51-3G 1510 nm DFB

7707EO53-3G 1530 nm DFB

7707EO55-3G 1550 nm DFB

7707EO57-3G 1570 nm DFB

7707EO59-3G 1590 nm DFB

7707EO61-3G 1610 nm DFB

There are several versions with built in isolators specifically suited to dense wave division multiplexing

(DWDM) applications. The DWDM versions are suitable for distances >50 km @ 2.97 Gb/s (for DWDM

applications contact factory).

7707EODyyy-3G DWDM DFB laser output, yyy – ITU channel number

The 7707EO-3G occupies one card slot and can be housed in either a 1RU frame, which will hold up to

three modules, or a 3 RU frame, which will hold up to 15 modules.

7700 Multi-Frame Manual

7707EO-3G 3G/HD/SDI Re-Clocking Electrical to Optical Converter

Page-2 Revision 1.1

Features:

•Supports all SMPTE 424M standards at 2.970Gb/s

•Supports all SMPTE 292M standards at 1.485Gb/s

•Supports all SMPTE 259M-C standards at 270Mb/s

•Supports DVB-ASI (270Mb/s), and SMPTE 305M (SDTi) rates

•Auto rate selection, indication and reclocking for all SDI, HD-SDI, 3G-SDI data rates from 270Mb/s

to 2.970Gb/s

•Selectable non-reclock mode for other data rates

•Detection and display video format rate

•User enabled GPO configurable to normally open or normally closed

•Automatic coaxial input equalization to 70m at 2.97Gb/s, 100m at 1.485Gb/s, and 250m at

270Mb/s (Belden 1694A)

•Optical Output wavelength of 1310nm, 1550nm, and up to sixteen CWDM wavelengths (ITU-T

G.694.2 compliant)

•DWDM wavelengths (ITU-T G.694.1 compliant) also available

•Supports single-mode and multi-mode fiber optic cable

•Fully hot-swappable from front of frame

•Comprehensive signal and card status monitoring via four digit card edge display or remotely

through SNMP and VistaLINK®

•Can be housed in either a 1RU frame which will hold up to 3 modules, a 3RU frame which will hold

up to 15 modules, 3RU portable frame that holds up to 7 modules or a standalone frame which will

hold 1 module

•VistaLINK®capability is available when modules are used with the 3RU 7700FR-C or 350FR

portable frame and a 7700FC VistaLINK® Frame Controller module in slot 1 of the frame

ADAPTIVE

EQUALIZATION

RECLOCKING

SMPTE 424M

SMPTE 292M

SMPTE 259M-C

SMPTE 305M

DVB-ASI

CONTROL/

INDICATION

VistaLINK®

Interface

LOCAL

CONTROL LOCAL

INDICATION

SERIAL

INPUT OPTICAL

OUTPUT

SERIAL

OUTPUT

OPTICAL

DRIVER

SERIAL

OUTPUT

CABLE

DRIVERS

GPO

Figure 1-1: 7707EO-3G Block Diagram

7700 Multi-Frame Manual

7707EO-3G 3G/HD/SDI Re-Clocking Electrical to Optical Converter

Revision 1.1 Page-3

2. INSTALLATION

The 7707EO-3G comes with a companion rear plate that has three BNC connectors and one SC/PC

(shown), ST/PC or FC/PC optical connector. For information on mounting the rear plate and inserting the

module into the frame see section 3 of the 7700FR chapter.

7707EO-3G

3G/HD/SDI

INPUT

FIBER

OUTPUT

GPO

3G/HD/SDI

OUTPUT

Figure 2-1: 7707EO-3G Rear Panel

2.1. ELECTRICAL SIGNAL CONNECTIONS

3G/HD/SDI INPUT: Input BNC connector for 10-bit serial digital video signals compatible with SMPTE

424M, SMPTE 292M, SMPTE 259M-C, SMPTE 305M, and DVB-ASI. This input

provides adaptive compensation for up to 70m of industry standard Belden

1694A cable at rates to 2.970Gb/s, 100m at 1.485Gb/s, and 250m at 270Mb/s.

3G/HD/SDI OUTPUT: There are two BNC connectors with serial component video outputs, compatible

with SMPTE 424M, SMPTE 292M, SMPTE 259M-C, SMPTE 305M, and DVB-

ASI. Reclocking is provided or may be disabled by the user in Non-Reclock

mode.

7700 Multi-Frame Manual

7707EO-3G 3G/HD/SDI Re-Clocking Electrical to Optical Converter

Page-4 Revision 1.1

GPO: The 7707EO-3G provides the user with 1 General Purpose Output. It is dry-

contact relay closure. The GPO polarity is user selectable normally open or

normally closed, and always open on power loss. Figure 2-2 shows the

output circuitry. Refer to 3.4 for electrical specifications.

GPO

GROUND

Figure 2-2: General Purpose Output

2.2. OPTICAL CONNECTIONS

FIBER OUTPUT: There is one SC/PC (shown), ST/PC or FC/PC female connector with the video

output converted to an optical signal as specified in section 3.3.

This optical output is available in 1310nm, 1550nm, up to sixteen CWDM

wavelengths (ITU-T G.694.2 compliant) and up to 40 DWDM wavelengths

(ITU-T G.694.1 compliant). The output wavelength is marked on the rear panel of

each module. When connected directly to a companion module, the output is

compatible with multi-mode fiber optic cable. If not connected directly (i.e.

connected through CWDM, DWDM, WDM, or splitter/combiner) the output is

compatible only with single-mode fiber optic cable.

Do not hook up the 7707EO-3G DWDM cards directly with a short fiber optic

cable. The 7707EO-3G DWDM cards produce +7dBm of power, which will

damage the receiver if connected directly.

Do not hook up the 7707EO-3G cards that output more than -7dBm of power

(see 7707EO-3G specifications for output power of various laser types) and

7707OE-3G-H high sensitivity receiver cards directly with a short fiber optic

cable. The 7707EO-3G cards that produce more than -7dBm of power will

damage the receiver if connected directly.

7700 Multi-Frame Manual

7707EO-3G 3G/HD/SDI Re-Clocking Electrical to Optical Converter

Revision 1.1 Page-5

2.3. CARE AND HANDLING OF OPTICAL FIBER

2.3.1. Safety

CLASS 1 LASER PRODUCT

Background colour: yellow

Triangular band: black

Symbol: black

2.3.2. Assembly

Assembly or repair of the laser sub-module is done only at the Evertz facility and performed only by

qualified Evertz technical personnel.

2.3.3. Labeling

Certification and Identification labels are combined into one label. As there is not enough room on the

product to place the label it is reproduced here in the manuals.

•There is no date of manufacture on this label as it can be traced by bar code label placed on the

Printed circuit board of each Evertz plug-in module

•The Model number is one of: 7707EO13-3G, 7707EO15-3G,

7707EOxx-3G, (xx = 27, 29, 31, 33, 35, 37, 43, 45, 47, 49, 51, 53, 55, 57, 59, 61)

7707EODyyy-3G (Dyyy represents ITU Grid Channel: D200, D210, D220, D230, D240, D250,

D260, D270, D280, D290, D300, D310, D320, D330, D340, D350, D360, D370, D380, D390,

D400, D410, D420, D430, D440, D450, D460, D470, D480, D490, D500, D510, D520, D530,

D540, D550, D570, D580, D590, D600)

Figure 2-3: Reproduction of Laser Certification and Identification Label

7700 Multi-Frame Manual

7707EO-3G 3G/HD/SDI Re-Clocking Electrical to Optical Converter

Page-6 Revision 1.1

2.3.4. Handling and Connecting Fibers

Never touch the end face of an optical fiber. Always keep dust caps on optical fiber

connectors when not connected and always remember to properly clean the optical

end face of a connector before making a connection.

The transmission characteristics of the fiber are dependent on the shape of the optical core and therefore

care must be taken to prevent fiber damage due to heavy objects or abrupt fiber bending. Evertz

recommends that you maintain a minimum bending radius of 5 cm to avoid fiber-bending loss that will

decrease the maximum attainable distance of the fiber cable. The Evertz fiber optic modules come with

cable lockout devices, to prevent the user from damaging the fiber by installing a module into a slot in the

frame that does not have a suitable I/O module. For further information about care and handling of fiber

optic cable see section 3 of the Fiber Optics System Design section of this manual binder.

Inhaltsverzeichnis

Andere evertz Medienkonverter Handbücher

evertz

evertz 7700 Series Bedienungsanleitung

evertz

evertz HD9690 Series Bedienungsanleitung

evertz

evertz 8084 Bedienungsanleitung

evertz

evertz 7700 Series Bedienungsanleitung

evertz

evertz HD9010-SIE Bedienungsanleitung

evertz

evertz 7700 Series Bedienungsanleitung

evertz

evertz hd9084 Bedienungsanleitung

evertz

evertz 7812UDXD Series Bedienungsanleitung

evertz

evertz 7772MFX-HD Bedienungsanleitung

evertz

evertz 2431RX-2 Bedienungsanleitung

evertz

evertz 5782DEC Bedienungsanleitung

evertz

evertz 7700 Series Bedienungsanleitung

evertz

evertz 570REM-TX8-10GE Bedienungsanleitung

evertz

evertz 7700 Series Bedienungsanleitung

evertz

evertz 5950-SID Bedienungsanleitung

evertz

evertz 8084 Bedienungsanleitung

evertz

evertz 7700 Series Bedienungsanleitung

evertz

evertz 7700 Series Bedienungsanleitung

evertz

evertz 7700 Series Bedienungsanleitung

evertz

evertz 7735CEM Bedienungsanleitung

evertz

evertz 7700 MultiFrame Bedienungsanleitung

evertz

evertz 7700 Series Bedienungsanleitung

evertz

evertz 2405EO Bedienungsanleitung

evertz

evertz 2430GDAC-MWP Bedienungsanleitung

Beliebte Medienkonverter Handbücher anderer Marken

SoundTraxx

SoundTraxx Blunami BLU-2200 Bedienungsanleitung

SPROLINK

SPROLINK VA1 Bedienungsanleitung

Acclaim Lighting

Acclaim Lighting DDC-1-AC Bedienungsanleitung

Nikon

Nikon AF-S TC-20E III Bedienungsanleitung

Axis

Axis AXIS Q7406 Bedienungsanleitung

Omega

Omega TAC80B-J Bedienungsanleitung

Zoom

Zoom Thunderbolt TAC-2R Bedienungsanleitung

OST

OST iConverter 10/100M Bedienungsanleitung

Vertiv

Vertiv Netsure Bedienungsanleitung

birddog

birddog MINI Bedienungsanleitung

Roland

Roland GI-10 Bedienungsanleitung

Wallenstein

Wallenstein WX310 Bedienungsanleitung

Pace

Pace MSS 200-1 Bedienungsanleitung

Solar Converters

Solar Converters EQ 12/24-50 Bedienungsanleitung

CYP

CYP EL-7400V Bedienungsanleitung

TIE

TIE MIDI 1i1o Bedienungsanleitung

DCS

DCS Vivaldi Upsampler Bedienungsanleitung

Westermo

Westermo MCW-211 SERIES Bedienungsanleitung

evertz 7707EO-3G Bedienungsanleitung

Beliebte Medienkonverter Handbücher anderer Marken