evertz 7707VB-8-ASI-OC3 Bedienungsanleitung
7700 MultiFrame Manual
7707VB-8-ASI-OC3 8 Channel ASI + Ethernet SONET / SDH Fiber Transceiver
Revision 1.0
TABLE OF CONTENTS
1. OVERVIEW........................................................................................................................................1
2. INSTALLATION.................................................................................................................................3
2.1. CARE AND HANDLING OF OPTICAL FIBER......................................................................4
2.1.1. Safety.........................................................................................................................4
2.1.2. Assembly....................................................................................................................4
2.1.3. Labeling......................................................................................................................4
2.1.4. Handling and Connecting Fibers................................................................................5
3. SPECIFICATIONS.............................................................................................................................6
3.1. SERIAL VIDEO INPUT..........................................................................................................6
3.2. SERIAL VIDEO OUTPUTS....................................................................................................6
3.3. OPTICAL OUTPUT................................................................................................................6
3.4. OPTICAL INPUT....................................................................................................................7
3.5. ELECTRICAL ........................................................................................................................7
3.6. PHYSICAL.............................................................................................................................7
3.7. COMPLIANCE.......................................................................................................................7
4. STATUS INDICATORS AND DISPLAYS..........................................................................................8
4.1. STATUS INDICATOR LEDS .................................................................................................8
4.2. CARD EDGE DISPLAY.........................................................................................................9
4.2.1. STAT Menu..............................................................................................................11
4.2.1.1. Displaying the Optical Link Data Standard ..............................................12
4.2.1.2. Displaying Optical Power.........................................................................12
4.2.1.3. Displaying the Current Interval Counter...................................................12
4.2.1.4. Displaying the Last Interval Counter........................................................13
4.2.1.5. Displaying the Errored Seconds Ratio.....................................................14
4.2.1.6. Displaying the Loss of Signal seconds in Line Layer...............................14
4.2.1.7. Displaying the Link Output Reference Clock Source...............................14
4.2.1.8. Displaying the Link Input Status...............................................................15
4.2.1.9. Displaying Input ASI Status Information ..................................................15
4.2.1.10. Displaying the Total Input ASI Bandwidth Used ......................................15
4.2.1.11. Displaying Output ASI Status Information................................................16
4.2.1.12. Displaying the Output ASI Bandwidth Used.............................................16
4.2.1.13. Displaying the TDMD Data Errors............................................................16
4.2.1.14. Displaying the Ethernet Status.................................................................17
4.2.1.15. Displaying the Ethernet Speed ................................................................17
4.2.1.16. Displaying Firmware Version...................................................................17
4.2.2. Control Menu............................................................................................................18
4.2.2.1. Setting the Optical Link Standard ............................................................19
4.2.2.2. Setting the Behavior of Laser when no Signal is Applied ........................19
4.2.2.3. Setting the Clock Source .........................................................................19
4.2.2.4. Clearing the Counters..............................................................................19
4.2.2.5. Setting the Severe Errored Second Threshold........................................20
4.2.2.6. Passcode Protection Configuration..........................................................20
4.2.2.7. Setting the Orientation of the Text on the Card Edge Display.................22
7700 MultiFrame Manual
7707VB-8-ASI-OC3 8 Channel ASI + Ethernet SONET / SDH Fiber Transceiver
Revision 1.0
5. JUMPERS........................................................................................................................................23
5.1. SELECTING WHETHER LOCAL FAULTS WILL BE MONITORED BY
THE GLOBAL FRAME STATUS.........................................................................................24
5.2. CONFIGURING THE MODULE FOR FIRMWARE UPGRADES ........................................24
5.2.1. Using the Upgrade Jumper ......................................................................................24
5.2.2. Upgrade Serial Port Command ................................................................................24
6. VISTALINK®REMOTE MONITORING/CONTROL.........................................................................25
6.1. WHAT IS VISTALINK®? ......................................................................................................25
6.2. VISTALINK®MONITORED PARAMETERS........................................................................26
6.3. VISTALINK®CONTROLLED PARAMETERS.....................................................................27
6.4. VISTALINK®TRAPS ...........................................................................................................28
Figures
Figure 1-1: 7707VB-8-ASI-OC3 Block Diagram....................................................................................................2
Figure 2-1: 7707VB-8-ASI-OC3 Rear Panel.........................................................................................................3
Figure 2-2: Reproduction of Laser Certification and Identification Label..............................................................4
Figure 4-1: Location of Status Indicators and Controls.........................................................................................8
Figure 4-2: Card Edge Menu...............................................................................................................................10
Figure 4-3: STAT Menu Structure......................................................................................................................11
Figure 4-4: Control Menu ....................................................................................................................................18
Figure 5-1: Location of Status Indicators and Jumpers – Top Board .................................................................23
Figure 5-2: Location of Status Indicators and Jumpers – Bottom Board............................................................23
Tables
Table 6-1: VistaLINK®Monitored Parameters.....................................................................................................26
Table 6-2: VistaLINK®Controlled Parameters....................................................................................................27
Table 6-3: VistaLINK®Traps...............................................................................................................................28
7700 MultiFrame Manual
7707VB-8-ASI-OC3 8 Channel ASI + Ethernet SONET / SDH Fiber Transceiver
Revision 1.0
REVISION HISTORY
REVISION DESCRIPTION DATE
1.0 First release Jan 2010
Information contained in this manual is believed to be accurate and reliable. However, Evertz assumes no responsibility for the use thereof nor for
the rights of third parties, which may be affected in any way by the use thereof. Any representations in this document concerning performance of
Evertz products are for informational use only and are not warranties of future performance, either expressed or implied. The only warranty offered
by Evertz in relation to this product is the Evertz standard limited warranty, stated in the sales contract or order confirmation form.
Although every attempt has been made to accurately describe the features, installation and operation of this product in this manual, no warranty is
granted nor liability assumed in relation to any errors or omissions unless specifically undertaken in the Evertz sales contract or order confirmation.
Information contained in this manual is periodically updated and changes will be incorporated into subsequent editions. If you encounter an error,
please notify Evertz Customer Service department. Evertz reserves the right, without notice or liability, to make changes in equipment design or
specifications.
7700 MultiFrame Manual
7707VB-8-ASI-OC3 8 Channel ASI + Ethernet SONET / SDH Fiber Transceiver
Revision 1.0
WARNING
Never look directly into an optical fiber. Non-reversible damage to the eye can
occur in a matter of milliseconds.
7700 MultiFrame Manual
7707VB-8-ASI-OC3 8 Channel ASI + Ethernet SONET / SDH Fiber Transceiver
Revision 1.0 Page - 1
1. OVERVIEW
The 7707VB-8-ASI-OC3 is a VistaLINK®enabled, OC-3/STM-1 (155.52Mb/s) fiber transceiver for DVB-
ASI video signals. The card also has a built-in 10/100/1000 Base T Ethernet transceiver port. This dual
fiber single card combines 8 asynchronous DVB-ASI signals using Time Domain Multiplex (TDM)
technology. A companion 7707VB-8-ASI-OC3 card acts as a demultiplexer for the incoming signal and
converts them back to separate ASI video feeds, while utilizing a separate fiber for the outgoing signal.
Monitoring and control of card status and parameters are provided locally at the card edge or remotely via
VistaLINK®.
The fiber output is available in an assortment of optical wavelengths, accommodating standard, CWDM or
DWDM transmission schemes.
7707VB13-8-ASI-OC3 1310 nm FP -7dBm output, suitable for distances up to 50 km
7707VB15-8-ASI-OC3 1550 nm DFB 0dBm output, suitable for distances up to 75 km
There are several versions with built in isolators specifically suited to coarse wave division multiplexing
(CWDM) applications. These versions all have 0dBm output and are suitable for distances up to 75 km.
7707VB27-8-ASI-OC3 1270 nm DFB
7707VB29-8-ASI-OC3 1290 nm DFB
7707VB31-8-ASI-OC3 1310 nm DFB
7707VB33-8-ASI-OC3 1330 nm DFB
7707VB35-8-ASI-OC3 1350 nm DFB
7707VB37-8-ASI-OC3 1370 nm DFB
7707VB43-8-ASI-OC3 1430 nm DFB
7707VB45-8-ASI-OC3 1450 nm DFB
7707VB47-8-ASI-OC3 1470 nm DFB
7707VB49-8-ASI-OC3 1490 nm DFB
7707VB51-8-ASI-OC3 1510 nm DFB
7707VB53-8-ASI-OC3 1530 nm DFB
7707VB55-8-ASI-OC3 1550 nm DFB
7707VB57-8-ASI-OC3 1570 nm DFB
7707VB59-8-ASI-OC3 1590 nm DFB
7707VB61-8-ASI-OC3 1610 nm DFB
There are several versions with built in isolators specifically suited to dense wave division multiplexing
(DWDM) applications. The DWDM versions are suitable for distances >120 km (for DWDM applications
contact the factory).
7707VBDyyy-8-ASI-OC3 DWDM DFB laser output, yyy – ITU channel number
The 7707VB-8-ASI-OC3 occupies three card slots in the 3 RU frame, which will hold up to 5 modules.
7700 MultiFrame Manual
7707VB-8-ASI-OC3 8 Channel ASI + Ethernet SONET / SDH Fiber Transceiver
Page - 2 Revision 1.0
Features:
•Transports signal over OC-3/STM-1 data rates (155.52Mb/s)
•Single card TDM multiplexer and demultiplexer for 8 bi-directional asynchronous DVB-ASI signals
•Built-in Ethernet transceiver with one 10/100/1000 Base-T port with FBM (Fiber Bandwidth
Management)
•Interfaces directly to SONET/SDH infrastructure
•Signal transport uninterrupted by loss of any DVB-ASI input feed
•Stratum 3 wander/holdover/jitter compliance
•Wide input frequency range tolerance (±50ppm)
•Comprehensive signal and card status monitoring via four character card-edge display
•VistaLINK®– enabled offering remote monitoring, control and configuration capabilities via SNMP.
VistaLINK®is available when modules are used with the 3RU 7700FR-C frame, a 7700FC
VistaLINK®Frame Controller module in slot 1 of the frame using the 9000NCP Network Control
Panel or Evertz VistaLINK®PRO or other third party SNMP manager software
•Automatic coaxial equalization up to 250m (Belden 1694A or equivalent cable)
•Fully hot-swappable from front of frame with no fiber/coax disconnect/reconnect required
•Supports single-mode and multi-mode fiber optic cable
•Optical output wavelengths of 1310nm, 1550nm and up to 16 CWDM wavelengths
•DWDM wavelengths also available
•SC/PC, ST/PC, FC/PC fiber connectors available
SONET/
SDH TDM
MUX
Input Stage
Optical
Transmitter
Input Stage
Input Stage
Input Stage
SONET/
SDH TDM
DEMUX
Optical
Receiver
CONTROL/
INDICATION LOCAL
CONTROL
VistaLINK®
Interface
LOCAL
INDICATION
FIBER OUTPUT
FIBER INPUT
8 ASI INPUTS
8 ASI OUTPUTS
10/100/1000
ETHERNET
RJ45
1
2
3
4
FBM Technology
Input Stage
5
Input Stage
Input Stage
6
7
Input Stage
8
1
2
3
4
5
6
7
8
Output Stage
Output Stage
Output Stage
Output Stage
Output Stage
Output Stage
Output Stage
Output Stage
Figure 1-1: 7707VB-8-ASI-OC3 Block Diagram
7700 MultiFrame Manual
7707VB-8-ASI-OC3 8 Channel ASI + Ethernet SONET / SDH Fiber Transceiver
Revision 1.0 Page - 3
2. INSTALLATION
The 7707VB-8-ASI-OC3 comes with a companion rear plate that has 16 BNC connectors, one RJ45
connector, and two SC/PC (shown), ST/PC or FC/PC optical connector. For information on mounting the
rear plate and inserting the module into the frame see section 3 of the 7700FR chapter.
Figure 2-1: 7707VB-8-ASI-OC3 Rear Panel
ASI IN 1-8: Eight independent BNC input connectors compatible with DVB-ASI for a combined
bandwidth of 135Mb/s. These inputs provide adaptive compensation for up to 250m
of industry standard Belden 1694A cable.
ASI OUT 1-8: Eight independent BNC output connectors compatible with DVB-ASI for a combined
bandwidth of 135Mb/s.
OPTICAL INPUT: SC/PC, SC/PC with cover (shown), ST/PC or FC/PC female connector. This wide
range input accepts optical wavelengths of 1270nm to 1610nm, accommodating
standard or CWDM transmission schemes.
OPTICAL OUTPUT: Output SC/PC, SC/PC with cover (shown), ST/PC or FC/PC female connector. This
optical output contains the four input DVB-ASI video signals.
ETHERNET PORT: RJ45 ethernet port for transport and receive of 10/100/1000 Base T Ethernet signal.
7700 MultiFrame Manual
7707VB-8-ASI-OC3 8 Channel ASI + Ethernet SONET / SDH Fiber Transceiver
Page - 4 Revision 1.0
2.1. CARE AND HANDLING OF OPTICAL FIBER
2.1.1. Safety
!
CLASS 1 LASER PRODUCT
Background colour: yellow
Triangular band: black
Symbol: black
2.1.2. Assembly
Assembly or repair of the laser sub-module is done only at Evertz facility and performed only by qualified
Evertz technical personnel.
2.1.3. Labeling
The Certification and Identification labels are combined into one label. As there is not enough room on the
product to place the label it is reproduced here in the manuals.
•There is no date of manufacture on this label as it can be traced by the bar code label placed on
the printed circuit board of each Evertz plug-in module
•The Model number is one of: 7707VB13-8-ASI-OC3, 7707VB15-8-ASI-OC3,
7707VBxx-8-ASI-OC3, (xx = 27, 29, 31, 33, 35, 37, 43, 45, 47, 49, 51, 53, 55, 57, 59, 61)
7707VBDyyy-8-ASI-OC3 (Dyyy represents ITU Grid Channel: D200, D210, D220, D230, D240,
D250, D260, D270, D280, D290, D300, D310, D320, D330, D340, D350, D360, D370, D380,
D390, D400, D410, D420, D430, D440, D450, D460, D470, D480, D490, D500, D510, D520,
D530, D540, D550, D570, D580, D590, D600)
Figure 2-2: Reproduction of Laser Certification and Identification Label
7700 MultiFrame Manual
7707VB-8-ASI-OC3 8 Channel ASI + Ethernet SONET / SDH Fiber Transceiver
Revision 1.0 Page - 5
2.1.4. Handling and Connecting Fibers
"
Never touch the end face of an optical fiber. Always keep dust caps on optical fiber
connectors when not connected. Always remember to properly clean the optical end
face of a connector before making a connection.
The transmission characteristics of the fiber are dependent on the shape of the optical core and therefore
care must be taken to prevent fiber damage due to heavy objects or abrupt fiber bending. Evertz
recommends that you maintain a minimum bending radius of 5 cm to avoid fiber-bending loss that will
decrease the maximum attainable distance of the fiber cable. The Evertz fiber optic modules come with
cable lockout devices to prevent the user from damaging the fiber by installing a module into a slot in the
frame that does not have a suitable I/O module. For further information about the care and handling of
fiber optic cable see section 3 of the Fiber Optics System Design section of this manual binder.
7700 MultiFrame Manual
7707VB-8-ASI-OC3 8 Channel ASI + Ethernet SONET / SDH Fiber Transceiver
Page - 6 Revision 1.0
3. SPECIFICATIONS
3.1. SERIAL VIDEO INPUT
Standards: DVB-ASI
Number of Inputs: 8 independent DVB-ASI signals with combined bandwidth of 135Mb/s
Connector: BNC per IEC 61169-8 Annex A
Equalization: Automatic 250m with Belden 1694 or equivalent cable
Return Loss: > 15 dB up to 270Mb/s
Frequency Offset Tolerance: ±50ppm
3.2. SERIAL VIDEO OUTPUTS
Standards: DVB-ASI
Number of Outputs: 8 independent DVB-ASI signals with combined bandwidth of 135Mb/s
Connectors: BNC per IEC 61169-8 Annex A
Signal Level: 800mV(nominal)
DC Offset: 0V ±0.5V
Rise and Fall Time: 900ps(nominal)
Overshoot: < 10% of amplitude
Return Loss: > 12dB
Wide Band Jitter: < 0.2UI
3.3. OPTICAL OUTPUT
Standards: OC-3/STM-1
Number of Outputs: 1
Connector: Female SC/PC, ST/PC or FC/PC
Return Loss: > 14 dB
Wide Band Jitter: < 0.2UI
Fiber Size: 9 µm core / 125 µm overall
Wavelengths:
Standard: 1310nm, 1550nm (nominal)
CWDM: 1270nm to 1610nm (See ordering information)
DWDM: C-Band channel 20 to 60, 100GHz spacing (ITU-T G.694.1 compliant)
Output Power:
1310nm FP: -7dBm ±1dBm
1550nm & CWDM: 0 dBm ±1dBm
DWDM: +7dBm ±1dBm
Inhaltsverzeichnis
Andere evertz Transceiver Handbücher
evertz
evertz 7700 Series Bedienungsanleitung
evertz
evertz 7707GPS-DT Bedienungsanleitung
evertz
evertz 7700 Series Bedienungsanleitung
evertz
evertz 7780ASIB2-DS3/E3 Bedienungsanleitung
evertz
evertz 7707IT Bedienungsanleitung
evertz
evertz 7708GT-4 Bedienungsanleitung
evertz
evertz 7700 Series Bedienungsanleitung
evertz
evertz 7707VB-4-ASI-OC3 Bedienungsanleitung
evertz
evertz 7700 MultiFrame Bedienungsanleitung
evertz
evertz 7708VB-8-HSE Bedienungsanleitung
