Evolis QUANTUM Bedienungsanleitung

USER GUIDE

Réf. KU12E. Rev A1.

Svetofor

Users must observe the copyright regulations applicable in their country. This manual must not be photocopied, translated, reproduced

or transmitted, in whole or in part, for any reason and by any electronic or mechanical means whatsoever without the express written

consent of the Evolis Card Printer company.

All the information contained in this document is subject to change without prior notice.

Evolis Card Printer cannot be held liable for any errors that may be found in this manual, or for any loss or damage arising accidentally or

as a result of dissemination or use of this manual.

Trademarks

is a trademark of Evolis Card Printer. All other trademarks belong to their respective holders.

Warranty

Refer to the warranty notice supplied with your printer for warranty terms and conditions and limitations.

Environmental information – recycling of end-of-life products

The manufacture of the equipment that you have purchased required the extraction and use of natural resources. It may contain

materials that are hazardous to health and the environment.To prevent the dispersal of such materials into our environment and reduce

the pressure on our natural resources, we recommend that you use existing collection systems. These systems will appropriately re-use or

recycle most of the materials in your end-of-life equipment.

The crossed-out dustbin symbol on your device is a reminder to use these systems.

If you need further information on collection, re-use and recycling systems, contact your local or regional waste management body.



www.evolis.com or by emailing the following address: [email protected].

Svetofor

About your new printer

Thank you for choosing an Evolis printer.

Using your new printer, you will be able to create a wide variety of high-quality cards and badges which can be printed in various

thicknesses, colours and styles. This printer uses consumables and accessories available from Evolis. For further details, visit our website at

www.evolis.com.

Warranty registration

Please register on line at www.evolis.com to receive our special offers and general information.

Once on the website, click on Drivers and Support

printer.

Getting started

The purpose of this user guide is to guide you, step by step, through your printer and how it works. Take some time to read it in order to

better understand your printer and its features, and to save time during installation and use.



emailing us at [email protected].

Contents

The bookmarks found top left of your screen can be used to navigate between the various sections in this user guide.

Icons

The following icons are used in this manual to highlight important information:

Information providing further details or depth about certain points in the main text.

Indicates that failing to take the recommended action is liable to damage your printer.

This symbol indicates that a video showing the procedure is available on the www.evolis.com website.

Svetofor

Getting started

1-1 Unpacking

Your printer is supplied with several accessories that we ask you to look at closely.

This list may vary depending on your location.

LThe printer is shipped in special packaging designed to prevent any damage in transit. If you notice any visible damage, do not hesitate

to contact the shipper and immediately inform your Evolis dealer, who will tell you the procedure to follow.

Evolis takes great care over the quality of its packaging and we ask that you keep this packaging somewhere clean and dry.

You will be asked for the full original packaging (outer box, inner wedges and protective bags) in the event that

the printer is returned. If the printer is returned without its original packaging and components are damaged in

transit, these components will no longer be covered by the warranty. You will be charged for new packaging

for shipping the printer back to you.

Accessories supplied with your printer:

OPower supply unit - VP ELECTRONIQUE Type PAC150M or PROTEK POWER Type PUP150N-14.

OMains power cable.

OUSB cable.

OInstallation and documentation CD-ROM.

OStarter cleaning kit

OQuick installation guide

OWarranty notice.

OCompliance statement documentation.

If any of these components is missing, please contact your Evolis dealer.

Use only the power supply unit supplied with your Evolis printer.

VP ELECTRONIQUE Type PAC150M or PROTEK POWER Type PUP150N-14.

Use only the USB cable supplied with your Evolis printer.

The Evolis printer must be placed in a dry location, protected from dust and draughts but well-ventilated. Take



Svetofor

1-2 Description of the printer and its functions

1- Card input feeder

2– Encoding module

3– Printing module

4– Output stack

5– Reject hopper (20 x 0.76 mm or 30 mil cards)

6– Centralised locking

7– Cover opening button (printing module)

8– Cover opening button (encoding module)

9- Control panel

10 - Power cable socket

11 - On-off switch

12 - Ethernet socke

13 - Computer USB socket

14 - DB9 connectors

15 - Peripheral USB socket

Svetofor

16 - Card input feeder and output stack release buttons

17 - Card turnover point

18 - Thermal print head

19 - Cleaning rollers

20 - Serial N° label

21 - Card thickness adjustment gauge

22 - Reversible module release button

23 - Reversible encoding module

24 - Encoder connections area

25 - Encoder attachment support

26 - Antenna attachment support

27 - Detachable cover

28 - Cover release button

Svetofor

1-3 Installation

1-3a CONNECTING THE PRINTER

³Connection to the power supply

The printer must be connected to a properly protected and earthed electrical installation.

FI: Laite on liitettävä suojamaadoitus koskettimilla varustettuun pistorasiaan.

NO: Apparatet må tilkoples jordet stikkontakt.

SE: Apparaten skall anslutas till jordat uttag.

This is a Class A device. Operation of this equipment in a residential

area may cause interference to radio communications. Should

this occur, the user may be asked to take appropriate measures.

Connect the power cable to the power supply unit, then plug

the power cable connector into the printer.

Next, plug the end of the power cable into an earthed power

socket.

Power up the printer by switching the switch to ON.

The display on the control panel lights up and the message

_ INITIALISATION _ is displayed. Once the start-up sequence has

_ READY _ and the LED is a steady

green light. Should this not be the case, the installation has not

been carried out correctly.Check the installation.

Before attempting any maintenance, always ensure that the power switch is in the OFF position and that the

power cable is unplugged. For your personal safety, ensure that both remain easy to access, especially in the

event of an emergency.

To save energy, the printer will automatically switch itself to standby mode after 10 minutes of inactivity.

Svetofor

³Connecting the USB cable

Under no circumstances should you connect the USB data cable before installation of the printer driver is

complete.

Refer to the section on printer driver installation for further details, and follow the instructions carefully.

Svetofor

1-3b RIBBONS

Evolis original ribbons optimise your printer’s operation and avoid causing damage to it. The use of ribbons from other suppliers is liable to

damage your printer and voids the manufacturer’s warranty for the printer.

For optimum print quality, Evolis recommends that the printer is fully cleaned every time the ribbon is changed. See the Servicing and

Maintenance section of this manual.

³Fitting the ribbon

Ensure that the appropriate ribbon type is selected in the print driver.

Open the printing module cover.

Insert the ribbon as shown.

Close the cover and press until a click is heard.



Svetofor

1-3c CARDS

!"#$%

Use only the card types recommended by Evolis.

Do not touch the printable surface of the cards in order to preserve print quality.

&'

Keep your cards protected from dust.

³Loading the cards

Remove the card feeder.

Open the card feeder door, and raise the weight.

Insert the cards, then lower the weight back down and close the card feeder door.

Put the feeder back into the printer (door facing outwards), clicking it into position.

  

Svetofor

Andere Handbücher für QUANTUM

Inhaltsverzeichnis

Andere Evolis Drucker Handbücher

Evolis

Evolis Primacy 2 SE Bedienungsanleitung

Evolis

Evolis Zenius Gebrauchs- und Pflegehandbuch

Evolis

Evolis KU10E Bedienungsanleitung

Evolis

Evolis Dualys 3 Bedienungsanleitung

Evolis

Evolis Zenius Bedienungsanleitung

Evolis

Evolis DUPLIPASS Bedienungsanleitung

Evolis

Evolis A5405 Bedienungsanleitung

Evolis

Evolis Securion Bedienungsanleitung

Evolis

Evolis Pebble Bedienungsanleitung

Evolis

Evolis Primacy Bedienungsanleitung

Evolis

Evolis KC200 Bedienungsanleitung

Evolis

Evolis Securion Bedienungsanleitung

Evolis

Evolis New Pebble Bedienungsanleitung

Evolis

Evolis Dualys Bedienungsanleitung

Evolis

Evolis KM500B Bedienungsanleitung

Evolis

Evolis KC MAX Bedienungsanleitung

Evolis

Evolis Badgy Bedienungsanleitung

Evolis

Evolis Dualys Bedienungsanleitung

Evolis

Evolis Primacy Bedienungsanleitung

Evolis

Evolis Badgy Bedienungsanleitung

Evolis

Evolis Unitech Securion Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Evolis

Evolis Avansia Bedienungsanleitung

Evolis

Evolis QUANTUM Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Lexmark

Lexmark 1400 Series Handbuch

Canon

Canon i70 Series Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Epson

Epson ET-7750 Betriebsanleitung

Canon

Canon CLBR 460ps Bedienungsanleitung

Eltron

Eltron P210 Guide Bedienungsanleitung

Ricoh

Ricoh MD-P1 Bedienungsanleitung

Epson

Epson SC-F7100 series Bedienungsanleitung

Epson

Epson Stylus C40UX Bedienungsanleitung

Canon

Canon imagePASS-A2 Bedienungsanleitung

Canon

Canon S820D Bedienungsanleitung

IRA3D

IRA3D POETRY4 Bedienungsanleitung