Evolve ShowerStart Express Bedienungsanleitung
Express Port purges cold water
up to 4x faster
option to collect for later use
1. Turn on Shower
3. Ready When You Are
Press lever (or pull optional cord)
to begin showering
CH
evolve™
ShowerStart®Express
How ShowerStart Express Works
FASTER HOT WATER – WARM UP FREEDOM – SAVE HOT WATER
2. Warm-Up Freedom
Auto-pauses once hot water arrives
so you can multitask without empty
shower running on and on
2. Position ShowerStart Express
vertically and tighten to the
shower pipe with a wrench.
No plumbers tape required.
3. Attach Pull Cord
optional
1. Hand tighten Shower Head onto
Express. Note, If no gasket seal is
present in shower head, apply
plumber's tape to threads
Installation on a Standard Shower Arm
CAUTION: Water exiting Express Port should not hit:
• hot/cold water controls
• shower door or curtain
• lip of tub
4. Aim the Express Port using
swivel adjustment to eliminate
splashing and leaks. Direct water
exiting port towards interior wall
(shower) or interior tub side wall
(tub/shower combo).
©2021 Evolve Technologies LLC. All rights reserved.
Patent http://www.thinkevolve.com/patents
Other U.S. and Foreign Patents Pending.
Designed in the USA. Manufactured in China Rev-1.0
Warranty claims:
480-496-2294
https://thinkevolve.com/pages/warranty-1
Evolve Technologies, LLC
3 Year Limited Warranty
IMPORTANT SAFETY INFORMATION:
ShowerStart Express is NOT an anti-scald device.
- Lower water heater temperature to prevent scalding accidents.
Water temperatures above 120° F can cause severe burns or even death.
- Always resume water flow and check temperature before entering shower.
ShowerStart Express
Pull cord
H₂0 re-direction kit
Contents
Wrench
Tools Needed
Need help? visit showerstart.com/support
H₂O Re-direction Kit (included)
Choose the hottest setting available when
turning on the shower. This shortens warm
up times and saves water.
Maximize Savings
To Save More Water: direct water exiting Express Port into a container
C
H
Considerations
• For use in homes with static water pressure of at least 20 psi, with
ideal operating range of 30-80psi
• Compatible with standard shower arms (attaches to 1/2'' NPT male threads)
• Tankless systems require a minimum flow rate to produce hot
water. With some tankless systems, a brief yet noticeable change
in the shower’s temperature may occur shortly after resuming the
shower’s normal flow.
• Auto resets for next use
To Install:
1. Slide Extension Hose over Express Flow
Director.
2. Insert Flow Director Mount into Extension
Hose end.
5. Ax self adhesive Flow Director Mount on
clean and dry wall in desired location.
6. Direct Extension Hose Spray towards interior
wall (shower) or interior tub side wall
(tub/shower combo) by aiming Flow Director
Mount.
Use to re-direct water exiting Express Port.
• Divert flow around Shower Caddy
• Smooths and quiets flow
• Improves targeting towards interior wall (shower)
or tub side wall (tub/shower combo).
• Includes 2ft white hose and flow director mount.
• Additional accessories available at:
www.showerstart.com WARNING!
Cancer and Reproductive Harm
www.P65Warnings.ca.gov
Product number: EV3801
Andere Evolve Sanitärprodukte Handbücher
