SAFETY TIPS
............................................... ...............................................
2
OBSERVE THE FOLLOWING: READ AND SAVE THESE INSTRUCTIONS
WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR PERSONAL INJURY, MOUNT TO
OUTLET BOX MARKED 'ACCEPTABLE FOR FAN SUPPORT OF 35 LBS(15.9 KG) OR LESS' AND USE
MOUNTING SCREWS PROVIDED WITH THE OUTLET BOX AND/OR SUPPORT DIRECTLY FROM
LUMINARIES ARE NOT ACCEPTABLE FOR FAN SUPPORT AND MAY NEED TO BE REPLACED.
BUILDING STRUCTURE. MOST OUTLET BOXES COMMONLY USED FOR THE SUPPORT OF
CONSULT A QUALIFIED ELECTRICIAN IF IN DOUBT.
1. Installation work and electrical wiring must be done by qualified person(s) in accordance with all
2. Use this unit only in the manner intended by the manufacturer. If you have any questions contact
3. After making the wire connections, gently push connections into outlet box with wire nuts pointing
conductor on one side of the outlet box and ungrounded conductor on the other side of the outlet
4. Before you begin installing the fan, switch power off at service panel and lock service disconnecting
means to prevent power from being switched on accidentally. When the service disconnecting
5. Be cautious! Read all instructions and safety information before installing your new fan. Review the
6. When cutting or drilling into wall or ceiling, do not damage electrical wiring and other hidden
7. Make sure the installation site you choose allows the fan blades to rotate without any obstructions.
8. To reduce the risk of fire, electric shock, or personal injury, this fan must be mounted to an outlet
(Mounting must support at least 35 lbs.)
9. WARNING! Do not bend blade holders during installation to motor, balancing or during cleaning.
10. Attach the mounting bracket using only the hardware supplied with the outlet box. Fan is only to
11. WARNING! To reduce the risk of fire or electric shock, do not use this fan with any solid state fan
12. If this unit is to be installed over a tub or shower, it must be marked as appropriate for the application.
13. NEVER place a switch where it can be reached from a tub or shower.
14. The combustion airflow needed for safe operation of fuel-burning equipment may be affected by this
those published by the National Fire Protection Association (NFPA), and the American Society for
15. Before servicing or cleaning unit, Switch power off at Service panel and lock service disconnecting
means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service
16. All set screws must be checked and re-tightened where necessary before installation.
17. Keep electrical appliances out of reach of children or infirmed persons. Do not let them use the
applicable codes and standards (ANSI/NFPA 70), including fire-rated construction.
the manufacturer.
up. The wires should be spread apart with the grounded conductor and the equipment-grounding
box.
means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service
panel.
accompanying assembly diagrams.
utilities.
Allow a minimum clearance of 7 feet from the floor to the trailing edge of the blade.
box marked suitable for fan support, and use the mounting screws provided with the outlet box.
Do not insert foreign object between rotating blades.
be mounted to an outlet box marked “Acceptable for Fan Support”.
speed control device, or variable speed control.
unit’s operation. Follow the heating equipment manufacturer’s guideline safety standards such as
Heating, Refrigeration and Air Conditioning Engineers (ASHRAE) and the local code authorities.
means to prevent power from being switched on accidentally. When the service disconnecting
panel.
appliances without supervision.
