Exodraft XTP150 Bedienungsanleitung

Your energy. Optimized.

Accessory

XTP150

UK |Read and save these instructions!

Your energy. Optimized.

Accessory |XTP150

Content

Product information 7

Scope of supply 7

Technical specications 8

Construction and components 9

Installation 10

Fitting 10

Electrical wiring 11

Operation and conguration 12

UK Conformity Assessed 13

Declaration of Conformity 14

Disposal

Electrical and electronic equipment (EEE) often contain materials, components and substances

that may harm the environment or be hazardous to your health. Products (WEEE) marked with

the ‘crossed-out wheeled bin’ symbol should be disposed of separately from other waste at the

end of its life. Though legislation may differ from country to country we strongly advise that

electrical and electronic waste is separated from other waste and disposed of according to

national legislation to protect the environment and personnel that may come into contact with

waste.

How to use this manual

This manual has been prepared based on the speciﬁc product and

contains relevant technical information and installations guides.

Accessories and spare parts are not covered by this manual.

Please refer to the individual manuals of these components.

This installation manual does not contain any system design documentation.

Failure to observe instructions marked with a danger symbol

may result in personal injury and/or damage to the product.

Errors and omissions excepted.

Disposal

Electrical and electronic equipment (EEE) often contain materials, components and substances

that may harm the environment or be hazardous to your health. Products (WEEE) marked with

the ‘crossed-out wheeled bin’ symbol should be disposed of separately from other waste at the

end of its life. Though legislation may differ from country to country we strongly advise that

electrical and electronic waste is separated from other waste and disposed of according to

national legislation to protect the environment and personnel that may come into contact with

waste.

How to use this manual

This manual has been prepared based on the speciﬁc product and

contains relevant technical information and installations guides.

Accessories and spare parts are not covered by this manual.

Please refer to the individual manuals of these components.

This installation manual does not contain any system design documentation.

Failure to observe instructions marked with a danger symbol

may result in personal injury and/or damage to the product.

Errors and omissions excepted.

Symbols

The following symbols may be used in the manual

to draw attention to danger or risk of personal

injury or damage to the product.

General prohibition

Failure to observe instructions marked with the prohibited

symbol may result in extreme danger or serious personal injury.

General warning

Failure to observe instructions marked with a danger symbol

may result in personal injury and/or damage to the product.

General attention

Marks a dangerous situation that, in the worst-case scenario,

can cause serious personal injury or signiﬁcant damage to the product.

Electricity hazard/High Voltage

Marks a situation in which caution is advised due to the risk of high voltage electric

shock which can cause serious personal injury or signiﬁcant damage to the product.

Connect an earth terminal to the ground

Failure to observe instructions marked with a danger symbol

may result in personal injury and/or damage to the product.

Permitted and approved

Permitted and approved method of installation.

Prohibited and not approved

Prohibited and not approved method of installation.

UK |5

Warning

To minimise the risk of ﬁre, electric shock, personal injury

and/or damage to the product please observe the following:

• Please read the manual before you start using the product and only use the product in

accordance with the manufacturer’s instructions. If in doubt, contact one of our specialized

dealers.

• All installations must be carried out by properly qualiﬁed personnel and in accordance

with national legislation and regulations.

• In order to avoid chimney ﬁ res, ensure that the chimney has been swept before mounting

the fan.

• Prior to servicing the product, disconnect the power and ensure that it cannot accidentally

be reconnected.

• Exodraft always recommends the use of a smoke alarm when a solid fuel ﬁreplace is

installed.

Your energy. Optimized.

6|UK

UK |7

3112029_XTP150_UK

Warning

To minimise the risk of ﬁre, electric shock, personal injury

and/or damage to the product please observe the following:

• Please read the manual before you start using the product and only use the product in

accordance with the manufacturer’s instructions. If in doubt, contact one of our specialized

dealers.

• All installations must be carried out by properly qualiﬁed personnel and in accordance

with national legislation and regulations.

• In order to avoid chimney ﬁ res, ensure that the chimney has been swept before mounting

the fan.

• Prior to servicing the product, disconnect the power and ensure that it cannot accidentally

be reconnected.

• Exodraft always recommends the use of a smoke alarm when a solid fuel ﬁreplace is

installed.

Your energy. Optimized.

Product information

XTP150 is a high-precision pressure transducer specially developed for solid-fuel systems. The XTP sensor

constant pressure is monitored and maintained by regulating the speed of the chimney fan automaticly.

Incorrect use may result in problems with soot, chimney res, etc. which might damage the product.

Please check out this site for advice about the product:

www.exodraft.com

Scope of supply

• XTP150

• Silicone hose Ø 5 mm

• Installation manual and user instructions

Warranty

All Exodraft products are covered by a 2-year guarantee as per European consumer rights legislation. For

some countries an extended period of guarantee may apply depending on either national legislation or

other clearly stipulated conditions. Customer complaints must be handled by a specialised dealer or who-

lesaler (preferably where the Exodraft product has been bought originally). An updated list of Exodraft

specialised dealers can be found on our website for the country in question.

Exodraft products must always be installed by properly qualied personnel. Exodraft reserves the right to

change these guidelines without prior notice.

The warranty and liability does not cover instances regarding personal injury or damage to property or the

product that can be ascribed to one or more of the following causes:

• Failure to follow this installation and operation manual

• Incorrect installation, start-up, maintenance or servicing

• Improper repairs

• Unauthorised structural modications made to the product

• Installation of additional components that have not been tested/approved with the product

• Any damage resulting from continued use of the product despite an evident defect

• Failure to use original spareparts and accessories

• Failure to use the product as intended

• Exceeding or failure to meet the limit values in the technical data

• Force majeure

8|UK

Your energy. Optimized.

Technical specications

Technical data

Description XTP150

H x W x D [mm] 80 x 82 x 55

Weight 165 g

Material: Box: Leight grey polycarbonat

(PC)

Ingress Protection IP65

Pressure range 5 Pa - 150 Pa ( 5 Pa -250 Pa )

+/- 0,1 % Full scale

Ambient temperature -25 °C - +50 °C

Storage temperature: -25 °C - +50 °C

Connection terminals: Screw: max. 1.5 wire

Cable length Max. 100 m, min. 0.75 wire

Project:

Material:

Date:

Rev.:

Title:

Rev. No.: Ref.:

Format: A3

Weight:

Approved:

Draw. No.:

Sheet:

XTP150

19-11-2012

XTP150

PMN

DS/EN 22768 m

Unless otherwise specified tolerances are after

0,000 kg

1 of 4

108

55,1

14,2

Project:

Material:

Date:

Rev.:

Title:

Rev. No.: Ref.:

Format: A3

Weight:

Approved:

Draw. No.:

Sheet:

XTP150

19-11-2012

XTP150

PMN

DS/EN 22768 m

Unless otherwise specified tolerances are after

0,000 kg

1 of 4

108

55,1

14,2

Project:

Material:

Date:

Rev.:

Title:

Rev. No.: Ref.:

Format: A3

Weight:

Approved:

Draw. No.:

Sheet:

XTP150

19-11-2012

XTP150

PMN

DS/EN 22768 m

Unless otherwise specified tolerances are after

0,000 kg

1 of 4

108

55,1

14,2

Description Inputs

Supply 24 VDC (+/- 15 %)

Power Consumption, abso-

lut max: 30 mA

Power Consumption,

nominel 20 mA

Description Outputs

Output 0-10 VDC, max. 10 mA

Description Miscellaneous

Tolerable overload 5000 Pa

Medium Air and exhaust gases

Responce time < 0,2 s

Resolution from digital

sensor 0,01 Pa

Repeatability +/- 0,1 % Full scale

Combined non-linearity

and hysteresis +/- 0,05 % Full scale

Offset longtime drift 1 year +/- 0,7 Pa max.

Temperature drift +/- 1,0 % Full scale

Transfer ratio 0,6 (250 Pa signal / 150 Pa

output)

UK |9

3112029_XTP150_UK

A DIP switch

B Power LED

C Zero-point calibration button

D Cable connector

E Mounting holes

F (-) Pressure connecter (P2)

G (+) Pressure connecter (P1)

H Status LED

I Connecting terminals

J Pressure transducer

Construction and components

DIP switch (A) Setting Function Factory setting OFF ON

ON RSN

1234

1 0-150 / 0-250 Pa OFF 0-150 Pa 0-250 Pa

2 Calibration enabled OFF OFF Calibrate

Operating LED (B/H) Indication Function

PIC # 1

PIC # 2

Power LED Flashing YELLOW Power On

Status LED constant GREEN Unit is Ok

Status LED off Unit is not working

Zero-point

calibration button (C)

To activate Function

Press and hold for 5 s Calibration of zero point

10 |UK

Your energy. Optimized.

Installation

Fitting

The XTP150 must be tted with the hose connectors facing down.

For negative-pressure measurement, t the pressure hose to the ( - ) Pressure connecter.

For positive-pressure measurement, t the pressure hose to the ( + ) Pressure connecter.

Outdoor

If there is a risk of adverse effect from strong winds, the hose located inside the XTP150 can be removed

from the (+) valve. Interlter should be tted to the external (+) valve. The lter is not supplied by Exodraft.

Do not blow into the valves on the XTP150

Inhaltsverzeichnis

Andere Exodraft Wandler Handbücher

Exodraft

Exodraft XTP150G Bedienungsanleitung

Beliebte Wandler Handbücher anderer Marken

HBM

HBM AD101B Bedienungsanleitung

Camille Bauer

Camille Bauer SINEAX F534 Bedienungsanleitung

Trane

Trane KIT 16724 Montageanleitung

Lumel

Lumel P18 Bedienungsanleitung

B&C Speakers

B&C Speakers DE75PTN Bedienungsanleitung

MAMAC SYSTEMS

MAMAC SYSTEMS PR-243 Handbuch

Mianyang Weibo Electronic

Mianyang Weibo Electronic WB Series Bedienungsanleitung

ProMinent

ProMinent Dulcometer DMT Bedienungsanleitung

MKS

MKS MicroPirani 925 Series Anleitung zur Verwendung

WIKA

WIKA WU-20 Bedienungsanleitung

Alcatel Vacuum Technology

Alcatel Vacuum Technology BARATRON 622A Bedienungsanleitung

Camille Bauer

Camille Bauer SIRAX CH-5610 Bedienungsanleitung

WIKA

WIKA F2802 Bedienungsanleitung

Veris Industries

Veris Industries PW Series Bedienungsanleitung

HBM

HBM TJ1-S6 Bedienungsanleitung

Simrad

Simrad ES120-7C - REV D Benutzerhandbuch

HBM

HBM C18 Bedienungsanleitung

Airmar

Airmar M260 Bedienungsanleitung