Expert EX-9486C-W Bedienungsanleitung
SERIALTO WiFi
CONVERTER
EX-9486C-W
User Manual
1
Table of Contents
Introduction …………………………………………………………………… 3
Overview …………………………………………………………………………. 4
Package Check List …………………………………………………………….. 5
Product Features ……………………………………………………………….. 6
Hardware Specifications ………………………………………………………. 8
Converter Description ……………………………………………………..11
Product Panel Views …………………………………………………….……. 11
Left Side …………………………………………………………………………. 12
Right side ………………………………………………………………………… 14
LED Indicators ………………………………………………………………….. 15
Wiring Architecture ……………………………………………………………. 16
RS-232 ……………………………………………………………………………. 16
RS-422/RS-485 ………………………………………………………………….. 16
Serial to Wi-Fi Converter Configuration ………………...………... 17
Software Setup and Initial IP Configuration ……………………….………. 16
EEX TOOL Software Setup ………………………………………………………
18
EEX TOOL Setup …………………………………………………………………18
Serial to Wi-Fi Configuration …………………………………………. 20
Hardware Installation ………………………………………………………….. 20
Search Device …………………………………………………………………... 20
Security Alert ……………………………………………………………………. 20
Authentication …………………………………………………………………. 21
Device IP Configuration ……………………………………………………… 22
System Information ……………………………………………………………… 22
2
IP Configuration ………………………………………………………………... 22
Wireless Configuration …………………………………………………………. 23
System Tools …………………………………………………………………… 24
Restart Tools ……………………………………………………………………. 24
Network Line Disconnection ………………………………………………..….. 24
Test Step with Wired and Wireless…………………………………………… 26
Enter to Web Management …………………………………………………........ 26
Serial Protocol Setting …………………………………………………………....26
Service Mode Setting ……………………………………………………….........29
Hyper Terminal Setting ………………………………………………………..... 30
Appendix A - Pin Outs and Cable Wiring …………………… 34
DC Power Outlet ……………………………………………………………….. 34
RJ-45 Pin Assignment ……………………………………………………… 34
RS-232 Pin Assignment ……………………………………………………… 34
RS-422 Pin Assignment …………………………………………………… 35
RS-485 Pin Assignment ……………………………………….……...………. 35
3
Introduction
Serial to Wi-Fi converter is provided new ways of connecting serial devices to a
Wireless LAN (Wi-Fi 802.11 b/g ). Serial to Wi-Fi Converter is designed to
operate serial ports through wireless (Wi-Fi 802.11 b/g) or entity line (RJ-45
cable) over 10/100Mbps Ethernet networks. The data is transmitted via TCP/IP
protocol. Therefore control is available via Ethernet, Intranet and Internet.
Serial to Wi-Fi Converter is packaged in a case well suited for industrial
environments. All serial ports operate in common RS-232 mode, industrial
RS-422 and RS-485 modes configuration.
With the maturity of Wi-Fi technology of 802.11b/g, delivering cost effective
becomes increasingly important. Model EX-9486C-W of Serial to Wi-Fi
converter product is a more competitive price by careful selecting high quality
with competitive prices components in the world, the product design is adopted
AR2317 single-chip, made network connectivity possible with affordable cost
for virtually all kinds of devices.
This user manual will guide you step by step for setting the various functions of
model EX-9486C-W product.
The following topics are covered in this chapter:
Overview
Package Checklist
Product Features
Product Specifications
4
Overview
Serial to Wi-Fi Converter is provided a perfect solution to make your
industrial serial devices Internet ready instantly via wireless LAN. Model
EX-9486C-W with Atheros/AR2317 chipset, Serial to Wi-FiConverter makes
them the ideal choice for connecting your RS-232 or RS-422/485 serial
devices such as PLCs, meters, and sensors—to an IP-based Wi-Fi∕
Ethernet LAN, making it possible for your software to access serial devices
anywhere and anytime over a wireless local LAN or the Internet. For RS-232
pin assignment of Atheros Series, it just provides TxD, RxD and GND pins
only without others like TXRTS, CTS, DTR, DSR and DCD.
Serial to Wi-Fi Converter support manual configuration via the handy web
browser console and many protocols including TCP, IP, UDP, HTTP, DHCP,
ICMP, and ARP. They are the best solution to network your serial devices.
5
Package Check List
Serial to Wi-Fi Converter product is shipped with the following items:
□
□
□1 unit of Serial to Wi-Fi Converter
□
□
□1 unit of dipole antenna(2.0dBi)
□
□
□Documentation & Utility CD
NOTE: Notify your sales representative if any of the above items is missing
or damaged.
6
Product Features
Data Conversion between RS-232/422/485 and Wireless Lan
Convert serial device (RS-232, RS-422, RS-485) data/signal into the
TCP/IP package data/signal and send them out with the Ethernet
DataStream via Wi-Fi wireless; or convert the TCP/IP package
data/signal into serial device data/signal.
Wi-Fi Wireless LAN(802.11 b/g)
It based on the latest industry standard Wi-Fi Certified IEEE 802.11b / g
specification; it offers maximum channel speeds of up to 54 Mbps. The
Wi-Fi function maintains interoperability within the 2.3∼2.5 GHz
frequency band, offering full compatibility with 802.11b / g networks. This
integrated wireless solution of Serial to Ethernet Converter is widely
deployed in business environments and is the standard for wireless
access in public places. It also supports key security features like Wi-Fi
Protected Access (WPA), WEP and 802.1x.
Dynamic IP Configuration
Support DHCP client mode, simplifying network address configuration
and management.
Dual LAN Speed
Support 10/100 Mbps Ethernet, auto-detected.
7
Server / Client Dual Modes
Series can be configured as network server or network client. In the
client mode, it can be installed in network which is protected by NAT
router or firewall, without the need of a real IP address.
Web-based Setup
Parameters setup is based on HTTPS protocol by using standard
browsers (IE and Netscape). No special software would be required. To
use https to enter Web-Server of converter
(For example https：∕∕192.168.0.115)
Built-in Security Control
It is protected by both setup password and access password to prevent
intruders.
Remote updated
Firmware can be reprogrammed directly via Ethernet network to keep up
with latest network standards.
8
Hardware Specifications
WLAN
1. Standard Compliance : IEEE 802.11 b / g
2. Spread Spectrum Technology: DSSS, OFDM
3. Tx Power 11b: Maximum 20 dBm
4. Tx Power 11g: Maximum 18 dBm
5. Rx Sensitivity: -70 dBm @ 54 Mbps, -85 dBm @ 11Mbps
6. Transmission Rate: 54 Mbps (max.) with auto fallback (54,48, 36, 24,
18, 12, 11, 9, 6, 5.5, 2, 1 Mbps)
7. Transmission distance: Up to 100 meters (@12 Mbps, in open areas)
8. Security: WEP 64-bit/128-bit data encryption, AES, WPA2
9. Antenna Connector: Reverse SMA, 2 dbi Antenna
10. Network Mode: Infrastructure, Ad-Hoc
LAN (For configuration / Ethernet hub)
1. Ethernet: 10/100 Mbps, RJ45
2. Protection: Built-in 1.5 KV magnetic isolation
Serial Communication Parameters
1. No. of ports : 1 * RS-232/422/485 port, male DB9, S/W selectable
2. RS-232 Signals : TxD, RxD and GND only
3. RS-422 Signal : Tx+ , Tx- , Rx+ , Rx –
4. RS-485 Signal : Data+ , Data-
5. Serial Line Protection : 15 KV ESD for all signals
9
Serial Communication Parameters
1. Parity: None, Even, Odd, Space, Mark
2. Data bits: 5, 6, 7, 8
3. Stop bits: 1, 1.5, 2
4. Flow control: XON/XOFF
5. Speed: 110 bps to 115.2+ Kbps
Power Requirements
1. Power input 1: 12 VDC & 1 A
Environmental
1. Operating Temperature : 0 to 70°C , 5 to 95% RH
2. Storage Temperature : -20 to 85°C (-4 to 185°F), 5 to 95%RH
3. Regulatory Approvals
RoHS
FCC, CE
Software Features
1. Protocols : ICMP, IP, TCP, UDP, DHCP, BootP, ARP / RARP, Telnet,
RTelnet, DNS, SNMP MIB II, HTTP, SMTP, SNTP
2. Serial mode : Virtual Com / TCP Server / TCP Client / UDP / Pairing
TCP Alive Check Timeout
Inactivity Timeout
Delimiter for Data Packing
Force TX Timeout for Data Packing
Andere Handbücher für EX-9486C-W
1
Inhaltsverzeichnis
Andere Expert Medienkonverter Handbücher
Expert
Expert EX-9486C-W Bedienungsanleitung
Expert
Expert EX952N Series Installationsanleitung
Expert
Expert EX-9132C-2RS485 Bedienungsanleitung
Expert
Expert EX-9543 Bedienungsanleitung
Expert
Expert EX9132C-2-MTCP Bedienungsanleitung
Expert
Expert EX9132C-RS485 Bedienungsanleitung
Expert
Expert EX-9132C-2 Bedienungsanleitung
