Exsys EX-1331-4KVIS Bedienungsanleitung

Thank you for purchasing this RS232/422/485 3-in-1 Serial to USB

Adapter. It is an intelligent expansion module that connects to a PC or

server via the Universal Serial Bus (USB), providing high-speed serial

connectivity. The serial ports are fully compatible with RS232/422/485

standard by the bundled virtual COM port drivers. It provides a universal

mounting Kit which can be mounted on wall, DIN Rail and other

surfaces. Moreover, with the 4KV isolation, 15KV ESD surge protection

and USB Screw Lock Mechanism features, it is an ideal solution for

most critical applications.

EX-1331-4KVIS

RS232/422/485 3-in-1 Serial to USB Adapter

(w/ 4KV Isolation, 15KV ESD Surge Protection)

2. Connector Layout

1. Introduction

Upstream

USB Port

RS232/422/485 Port

Mounting Kit for

Wall-mounting and

DIN ail Mounting

Options

Mode-Setting

Switches are on its

backside

RS232/422/485 3-in-1 Serial to USB Adapter w/ 4KV Isolation and Surge Protection

Features:

Provides 1 RS232/422/485 Serial Port over USB Port

Provides 1 DSUB-9 Connector

Supports USB2.0 High Speed (480Mbps) Data Rate

Supports USB Screw Lock Mechanism Enhances Reliability

Baud Rate from 300 bps to 921.6Kbps

Supports 7,8 Data Bits

Odd, Even, Mark, Space, or None parity mode

Supports 1, or 2 Stop Bits

Supports USB Bus Power

Supports 4KVrms Isolation and 15KV ESD Surge Protection

Supports Win98, Me, XP, CE, Win2000, 2003, Vista and Win 7, 8.x,

10 and Linux

There is an 8-pin DIP switch on the back side of the box for the required

settings. Their functions are described as follows:

Mode Settings:

The DIP switch has 8 pins, the first 3 pins (M0, M1, M2) are for mode

settings (RS232, RS485-2wire, RS485-4wire or RS422 modes), pin 4

(TERM) is to enable or disable terminator. Pin 5 and 6 (T+, T-) are to enable

or disable the bias for TX+ and TX- signals. Pin 7 and 8 (R+, R-) are to

enable or disable the bias for RX+ and RX- signals.

Note: Pin 5 to 8 are designed for RS422 and RS485 only and

should be set to OFF when you are setting the port to RS232 mode.

3. Mode Switch Settings

RS232/422/485 3-in-1 Serial to USB Adapter w/ 4KV Isolation and Surge Protection

Modes

Settings

(ON)

RS232

(Default)

RS485-2W

RS485-4W

RS422

RS232/422/485 3-in-1 Serial to USB Adapter w/ 4KV Isolation and Surge Protection

Termination Resistor Settings:

The pin 4 of the DIP switch is to enable the 120 Ohm termination resistor

between RX+ and RX- signals.

Terminator disabled (OFF, default):

Terminator enabled (ON):

Bias Resistors Enable/Disable:

Pin 5 to 8 of the DIP switch are to enable (ON) or disable (OFF) the 4 bias

resistors for TX+, TX-, RX+, RX- signals respectively. Please note that you

have to set them to OFF if you are setting the port in RS232 mode.

DIP Switch Pin 4

RS485-2wire mode:

RS485-4wire or RS422 mode:

RS232/422/485 3-in-1 Serial to USB Adapter w/ 4KV Isolation and Surge Protection

Disable (default) all 4 Bias resistors for TX+, TX-, RX+ and RX-:

Enable all 4 Bias resistors for TX+, TX-, RX+ and RX-:

This Adapter Cable can be hot-plugged to the USB port of your computer

due to the specifications of USB. It supports the following operating systems.

The drivers were shipped in the following folders on the supplied driver CD.

1. Driver Locations on the CD

These instructions are for installing the drivers from the CD supplied with

the product. If you are installing drivers for Windows, when prompted for the

location of the drivers, specify your DVD drive and the locations according

to the following folder list:

4. Installing Drivers

DIP Switch Pin 5

DIP Switch Pin 6

DIP Switch Pin 7

DIP Switch Pin 8

RS232/422/485 3-in-1 Serial to USB Adapter w/ 4KV Isolation and Surge Protection

2. Installing Drivers for (32-bit and 64-bit) Win7, 8.x, 10, XP, Vista,

2008, 2003 and 2000:

Insert the Driver CD supplied with the Adapter Cable.

Run (or double click) the Installer Program (e.g.CDM20824.exe ) in

the following folder of the driver CD:

\USB_to_IO\FTDI\(32_64bit)Win7_8_XP_Vista_2008_2008R2_2003_2000

Follow the instructions of the installer program to complete the

setup procedures.

Plugging the Adapter Cable will hook the drivers into the Windows

kernel automatically.

RS232/422/485 3-in-1 Serial to USB Adapter w/ 4KV Isolation and Surge Protection

The pin assignment of the DB9 male connector of the Adapter Cable is

dependent on its operation modes. Please refer to the following figure for

the corresponding mode:

1. RS232 Pin Assignment:

RS232 DB9(Male) to DB9(Male) Wiring:

5. Connector Pin Assignments

DB9 Male(Adapter Cable) DB9 Male(Serial Device)

1 DCD 1 DCD

2 RXD 2 RXD

3 TXD 3 TXD

4 DTR 4 DTR

5 GND 5 GND

6 DSR 6 DSR

7 RTS 7 RTS

8 CTS 8 CTS

RS232/422/485 3-in-1 Serial to USB Adapter w/ 4KV Isolation and Surge Protection

2. RS422 and RS485-4wire Pin Assignment:

RS422 Cable Wiring:

3. RS485-2wire Pin Assignment:

RS485-2wire Cable Wiring:

DB9 Male (Adapter Cable)

1 TXD-

2 TXD+

3 RXD+

4 RXD-

5 GND

(RS422 Device)

1 TXD-

2 TXD+

3 RXD+

4 RXD-

5 GND

DB9 Male (Adapter Cable)

1 DATA-

2 DATA+

5 GND

(RS485 Device)

1 DATA-

2 DATA+

5 GND

RS232/422/485 3-in-1 Serial to USB Adapter w/ 4KV Isolation and Surge Protection

Type

Specifications

Device Connector

Cable

Host Connector

Number of Ports

RS-232 Signals

RS422 Signals

RS485-4wire Signals

RS485-2wire

Baud Rate

Data Bits

Stop Bits

I/O address/IRQ

Parity

Flow Control

Isolation

ESD Surge Protection

Power Requirement

Operating Temperature

Operating Humidity

Storage Temperature

DB9 male

USB

USB Type-B (Supports Screw-lock)

TXD, RXD, RTS, CTS, DTR, DSR, DCD,

GND

TXD+, TXD-, RXD+, RXD-, GND

DATA+(B)/DATA-(A)

110 bps to 921.6Kbps

5,6,7,8

1, 1.5, 2

Plug-and-Play (various)

None, Even, Odd

RTS/CTS, XON/XOFF

4KVrms

15KV

5V/110mA (USB Bus Powered)

0 to 55C(32 to 132F)

5 to 95% RH

-20 to 85C (-4 to 185F)

5. Specifications

Inhaltsverzeichnis

Andere Exsys Adapter Handbücher

Exsys

Exsys EX-1452IS Bedienungsanleitung

Exsys

Exsys EX-1320 Bedienungsanleitung

Exsys

Exsys EX-3505 Bedienungsanleitung

Exsys

Exsys EX-6084 Bedienungsanleitung

Exsys

Exsys EX-6114 Bedienungsanleitung

Exsys

Exsys EX-1225 Bedienungsanleitung

Exsys

Exsys EX-1309-9 Bedienungsanleitung

Exsys

Exsys EX-47999 Bedienungsanleitung

Exsys

Exsys EX-1328 Bedienungsanleitung

Exsys

Exsys EX-6111 Bedienungsanleitung

Exsys

Exsys EX-1225 Bedienungsanleitung

Exsys

Exsys EX-1177HMVS-WT Bedienungsanleitung

Exsys

Exsys EX-45362IS Bedienungsanleitung

Exsys

Exsys EX-47000 Bedienungsanleitung

Exsys

Exsys EX-62020POE-SFP Bedienungsanleitung

Exsys

Exsys EX-6001 Bedienungsanleitung

Exsys

Exsys EX-1322 Bedienungsanleitung

Exsys

Exsys EX-6112 Bedienungsanleitung

Exsys

Exsys EX-2346IS Bedienungsanleitung

Exsys

Exsys EX-6011 Bedienungsanleitung

Exsys

Exsys EX-6124 Bedienungsanleitung

Exsys

Exsys EX-1329 Bedienungsanleitung

Exsys

Exsys EX-47925 Bedienungsanleitung

Exsys

Exsys EX-47960 Bedienungsanleitung

Beliebte Adapter Handbücher anderer Marken

PCB Piezotronics

PCB Piezotronics 090B274 Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt AT3-III E Bedienungsanleitung

Akribis

Akribis ITF-21-BISS-MIT Bedienungsanleitung

Auvidea

Auvidea J20 Produkthandbuch

Tenda

Tenda W54U Bedienungsanleitung

ROHO

ROHO AGILITY Bedienungsanleitung

PROLiNK

PROLiNK WN2001 Bedienungsanleitung

Hawking

Hawking HUF2 Bedienungsanleitung

Airlink101

Airlink101 AWLC4030 Bedienungsanleitung

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Bedienungsanleitung

Philips

Philips SWA4554S/10 Bedienungsanleitung

JVC

JVC TS-C9D2B Gebrauchsanweisung

NETGEAR

NETGEAR A6100 Bedienungsanleitung

D-Link

D-Link DWA-121 Bedienungsanleitung

Philips

Philips SWA2037 Bedienungsanleitung

Basalte

Basalte 0610-20 Bedienungsanleitung

Yealink

Yealink EHS40 Bedienungsanleitung

RCA

RCA AH57R Bedienungsanleitung