Extron electronics P/2 DA2 Plus Bedienungsanleitung

Setup Guide — P/2 DA2 Plus

This guide provides basic instructions for an experienced

installer to set up and operate the Extron P/2 DA2 Plus.

Installation

The P/2 DA2 Plus is a high performance, one input, two

output distribution ampliﬁer that accepts video input from

a VGA-QXGA compatible PC and distributes that signal to separately buffered outputs. See

the following application diagram.

P/2 DA2 PLUS

OUTPUT

LOCALMONITOR

OFF

1 2

Extron

P/2 DA2 Plus

VGA Distribution

Amplier

Projector

CInstallation and service must be performed by authorized personnel only.

Step 1 — Power down

Power off the display device, the PC and its local monitor.

Step 2 — Connect input

Connect the PC’s VGA output to the front panel input cable of the P/2 DA2 Plus distribution

ampliﬁer.

Step 3 — Connect outputs

• Connect the PC’s monitor to the Local Monitor 15-pin HD output connector of the

distribution ampliﬁer.

• Connect the display device to the Output 15-pin HD connector of the P/2 DA2 Plus.

Step 4 — Set DIP switches

Set the input and output impedance DIP switches:

Switch1(syncinputimpedance) – Default setting is down (510 ohms). If the image

from a laptop computer becomes unstable, slide the switch up (10k ohms).

Switch2(syncoutputimpedance) – Default setting is up (50 ohms). If the front LED

is green and all the input and output cables are properly connected, but there is no

image at the projector, slide the switch down (75 ohms).

(Continued on reverse side.)

OFF

1 2

Setup Guide — P/2 DA2 Plus

Extron USA - West

Headquarters

+800.633.9876

Inside USA / Canada Only

+1.714.491.1500

+1.714.491.1517 FAX

Extron USA - East

+800.633.9876

Inside USA / Canada Only

+1.919.863.1794

+1.919.863.1797 FAX

Extron Europe

+800.3987.6673

Inside Europe Only

+31.33.453.4040

+31.33.453.4050 FAX

Extron Asia

+800.7339.8766

Inside Asia Only

+65.6383.4400

+65.6383.4664 FAX

Extron Japan

+81.3.3511.7655

+81.3.3511.7656 FAX

Extron China

+400.883.1568

Inside China Only

+86.21.3760.1568

+86.21.3760.1566 FAX

Extron Middle East

+971.4.2991800

+971.4.2991880 FAX

68-1237-50

Rev. A

01 10

NThese DIP switches affect only the output display and not the local monitor

display.

Step 5 — Power up

Connect the power supply cord of the P/2 DA2 Plus to a 100 to 240 VAC power source and

power up the local monitor, PC, and display device.

Operation

After the P/2 DA2 Plus and its connected devices are powered up, the system is fully

operational. For further information, see “Troubleshooting” below.

Troubleshooting

Check all cable connections. If problems still exist, check the following steps:

1. If the image on the laptop and/or projector is distorted or unstable, do the following:

• Check if the front LED of the P/2 DA2 Plus is lit.

• Slide DIP switch 1 to a different position to see if the image becomes normal.

2. If there is no image on the projector, do the following:

• Check if the front LED is lit.

• Check if the VGA signal from the laptop is routed to the VGA port. Each laptop uses a

different key combination for this function.

• Slide DIP switch 2 to a different position and see if an image appears.

3. If the image still does not display correctly or the front panel LED of the P/2 DA2 Plus does

not light, call the Extron Sales and Support hotline.

Inhaltsverzeichnis

Andere Extron electronics Verstärker Handbücher

Extron electronics

Extron electronics MPA 152 MD Bedienungsanleitung

Extron electronics

Extron electronics CVDA 6 EQ MX Bedienungsanleitung

Extron electronics

Extron electronics P/2 DA2 Plus Bedienungsanleitung

Extron electronics

Extron electronics MDA 3AV RCA Bedienungsanleitung

Extron electronics

Extron electronics HDMI DA4 Bedienungsanleitung

Extron electronics

Extron electronics MLP 101 AAP Bedienungsanleitung

Extron electronics

Extron electronics Extron P/2 DA2 PLUS Bedienungsanleitung

Extron electronics

Extron electronics DVI DA2 Bedienungsanleitung

Extron electronics

Extron electronics P/2 DA2 MT Bedienungsanleitung

Extron electronics

Extron electronics FOX DA8 Bedienungsanleitung

Extron electronics

Extron electronics MDA 4V EQ Bedienungsanleitung

Extron electronics

Extron electronics SW2 VGA DA2 A Bedienungsanleitung

Extron electronics

Extron electronics DA4 12G HD-SDI Bedienungsanleitung

Extron electronics

Extron electronics FOX DA8 Plus Bedienungsanleitung

Extron electronics

Extron electronics DA 6V EQ Bedienungsanleitung

Extron electronics

Extron electronics Extron P/2 DA2xi Bedienungsanleitung

Extron electronics

Extron electronics HPA 1001-70V Bedienungsanleitung

Extron electronics

Extron electronics ADA 6 Component Bedienungsanleitung

Extron electronics

Extron electronics VersaTools MTP DA4 Bedienungsanleitung

Extron electronics

Extron electronics P/2 DA2xi MT Bedienungsanleitung

Extron electronics

Extron electronics XPA U 1004 SB Bedienungsanleitung

Extron electronics

Extron electronics ADA 2/GLI 350 HV Bedienungsanleitung

Extron electronics

Extron electronics P/2 DA2 Plus Bedienungsanleitung

Extron electronics

Extron electronics VGA Distribution Amplifiers P/2 DA4xi s Bedienungsanleitung

Beliebte Verstärker Handbücher anderer Marken

ASTRO

ASTRO HVO V40 P Bedienungsanleitung

Marantz

Marantz SUPERSCOPE BLA-545 Montageanleitung

NAD

NAD CI980 Bedienungsanleitung

Technics

Technics SE-CH770 Bedienungsanleitung

Harman Kardon

Harman Kardon HK6300 Bedienungsanleitung

NAD

NAD T975 Bedienungsanleitung

McIntosh

McIntosh MA6850 Bedienungsanleitung

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N Bedienungsanleitung

Viatron

Viatron Autrix Bedienungsanleitung

GME

GME GA9800 Bedienungsanleitung

Atlas

Atlas CP700 Bedienungsanleitung

Roland

Roland KC-1000 Bedienungsanleitung

Pyle

Pyle PFMRA350BW Bedienungsanleitung

Advantage

Advantage S-250 Bedienungsanleitung

IRT Electronics

IRT Electronics DVA-3007 Bedienungsanleitung

Dimavery

Dimavery BA-100 Series Bedienungsanleitung

Sony

Sony XM-S400D Bedienungsanleitung

Schertler

Schertler ROY X Bedienungsanleitung