Eye Trax Ranger Solar Bedienungsanleitung

Eye Trax, Inc

User Guide

Ranger Solar & 110V

Version 8-15

Installation and operation of the Eye Trax Ranger series cellular security camera system does not

require professional installation services. The following User Guide contains detailed instructions

on the web and mobile-based camera software called the User Interface along with procedures for

receiving and installing the outdoor surveillance camera system. The cellular data service for the

cellular surveillance camera is pre-provisioned at the Eye Trax manufacturing facility accompanied

by a User Name and Password to access the controls for the remote webcam system. If there are

any questions regarding the User Name and Password or if the cellular service has been stopped

for any amount of time please call technical support (800) 594-4157.

The Purchaser of the camera system was emailed the User Name and Password to access the

User Interface and is the Administrator on the account. http://www.eyetrax.net/

The cellular provisioning was pre-configured based on the initial “deploy location” of the camera

during time of purchase. If the camera is going to be relocated far away from the initial “deploy

location” please call (800) 594-4157 x2 or email tech support to verify cellular coverage.

***Be sure to read the entire User Guide prior to operating the motion activated camera

system and deploying it. There are very important steps to complete in efforts to verify

functionality and proper communication with local cellular tower.***

Subject Page

Receive Delivery of Camera System 3

User Interface 4

Camera Installation 17

Troubleshooting 25

•Mobile Phone

•10 ft. Ladder

•Phillips Head Screwdriver

•Measuring Tape

•Eye Trax Mobile App: On your mobile phone navigate to the “Client Login”.

•Angle Finder App: Located on iTunes or Google Play

•Compass App: Located on iTunes or Google Play

Overview

Contents

Tools Required For Camera Installation

Software Download For Smart Phones

Tracking Number

The tracking number to trace the location of the Eye Trax camera system is emailed to the

Purchaser (point of contact) who initially purchased the system.

Receipt Of Camera System

Before opening the box containing the outdoor camera system, inspect the packaging for any

damages that may have occurred during shipping. If any damage has occurred do not open the

box and take pictures of the damage and contact Technical Support (800) 594-4157.

Open Camera System Box

Open the outdoor camera system box and inspect the components for any damage that may have

occurred during shipping. If any damage has occurred take pictures of the damage and contact

Technical Support (800) 594-4157.

Become Familiar With Components

•Camera

•Solar Panel

•Mounting Brackets

•Mounting Hardware

Test the outdoor camera for functionality before it is deployed to the remote monitoring location.

Step 1. Locate and install the Antenna.

Step 2. Power the camera “ON” by depressing the toggle switch located within the

Camera’s mounting plate.

Step 4. Allow the camera to communicate with the local cellular tower and transmit a

“confirmation picture” back to the User Interface for 30-45 minutes.

Step 3. Log into the “User Interface” by entering the Username & Password that was

emailed with the tracking number of the camera shipment.

(see section: User Interface for software instructions)

Step 3. Request a “Live” image from the User Interface Camera Interface. The average

return time of a “live” image is 30 seconds.

(see section: User Interface for software instructions)

NOTE: Sending a “Live” image request to the camera, will sync the Camera to the

local cell tower and the Eye Trax Servers. This step MUST be done every time the

camera is relocated to new deploy locations.

Step 5. Once pictures have been received to the User Interface and the proper settings

have been set be sure to power the camera “OFF” until ready to use again.

NOTE: Allowing the battery to drop to low voltage levels and then back up ultimately

lowers the life of the battery cells.

Receive Delivery Of Camera System

***TEST SYSTEM***

The Eye Trax web-based & mobile phone application User Interface are the “hands on” controls of

the solar powered wireless outdoor security camera system once it has been deployed to the

remote area(s). From the User Interface, the User can perform the following functions:

•Alter Picture Acquisition Settings

•Change Camera Name & Location

•Set Time Zone Of Camera Location

•View All Pictures By Date & Time

•Request A LIVE Image

•Send Pictures To Email Accounts

•Turn On/Off Auto Email Function

•Send Pictures To Mobile Phones

•Turn On/Off Auto SMS Function

•Save Image To Desktop

•Create And Edit Time-Lapse Videos

•Place Text And Draw On Pictures

•Overlay Two Pictures For Comparison

•Add/Remove Users On The Account

•Modify User Privileges

•Modify User’s Camera Viewing Options

•View Time Lapse Video Archive

•Delete Pictures

•Capture Camera Snippet Code

When a User first logs into the account from a web browser or mobile phone app, the Camera

Console is the first page that will appear. The Camera Console is designed to be the

command center for viewing all outdoor cameras and having quick controls for changing

settings for all wireless outdoor security cameras and Users.

For Companies that are monitoring the wireless outdoor cameras for security purposes, this is

the page that would be active most of the time. Once the wireless outdoor security camera

has acquired a new picture, it will appear on this screen with a red box around it in efforts to

alert the security professional. Each outdoor camera will have a small picture on this page that

will be arranged by 3 across and infinitely down as they are added.

The Camera Console is also the main screen for Users with Administrative privileges to

perform the following functions:

•Add/Remove Users On The Account

•Modify User Privileges

•User’s Camera Viewing Options

•View Time Lapse Video Archive

•Delete Pictures

•Capture Camera Snippet Code

•Send Pictures To Email Accounts

•Turn On/Off Auto Email Function

•Send Individual Pictures To Mobile Phones

•Turn On/Off Auto SMS Function

•Alter Picture Acquisition Settings

•Change Camera Name & Location

•Set Time Zone Of Camera Location

User Interface & Camera Console

Camera Console

From any web browser enter: www.eyetrax.com and click on the “Member Login” button to open

the camera control software. The first page to open is the Camera Console. The same features

and functionalities can be found on the Eye Trax mobile phone application on iTunes or Google

Play.

Step 1. Click on “Member Login”.

Step 2. Enter username and password. This information was emailed to the “Purchaser”

of the camera system along with the tracking number of the shipment.

Camera Console

View multiple cameras in a command center view called the “Camera Console.” The Camera

Console gives the User ultimate control of all settings, Users, and administrative features of the

cameras. By clicking on any of the camera images below, the User will open the expanded

camera controls and features called the User Interface.

Camera Settings

This feature allows Users to quickly adjust any of the following features without having to open

the User Interface.

NOTE: This command must be sent to the camera every time it is moved to a new

location in order to establish communication with the local cellular tower.

NOTE: While the camera is in “5 Picture Burst” mode the acquired pictures from the

Burst must be sent over the cellular network prior to acquiring additional Burst of pictures.

Cellular transmission speed varies on available bandwidth. The time that is stamped on

each picture is the time for which the picture was received by the Eye Trax cloud server

system.

Red Alert

The Camera Console displays all cameras available to view and will display the latest picture to

be acquired by the camera. During this viewing by a User, if the camera acquires a new picture,

it will be displayed with a RED header and a GREEN checkmark. Once the User has reviewed

the new picture, click the GREEN checkmark to turn the alert “off” or “reviewed”.

Company Name

This feature allows the Owner of the cameras to modify the name of the Owner.

Add New Location

Click on “Add New Location” to create a physical location for the camera system. This will allow

the cameras to be mapped for a location reference.

NOTE: Moving a camera from one location to a new one will remove all of the pictures

associated with the camera and location.

Deploy Location

Click the Edit Location icon to map the physical location of the cameras.

Change Location

Click the Change Location icon to move a camera from one location to another.

NOTE: Moving a camera from one location to a new one will remove all of the

pictures associated with the camera and location.

Manage Users

Click the “Manage Users” icon to create, modify, set administrative privileges and reset

passwords for Users. The original Purchaser of the camera system is the default administrator.

•Client – access to all features the User Interface except “Manage Users”

•Client Admin - access to all features the User Interface

User Permissions

Click the “Camera Permissions” icon to set permissions for new Users for each particular

camera available.

•Administrator – allows full access to the User Interface

•Viewer – allows the User to view the User Interface without the permission to make

any changes to camera acquisition settings

•No Access – no access to the see the camera in login

Delete Pictures

Click the “Delete Photos” button to delete pictures by calendar day. The only way to delete

photos is by day. Moving the camera from one location to a new one will erase the pictures

associated with that particular location and start the camera with zero pictures in acquired

inventory.

Video Archive

Click on the “Videos” button to see all time-lapse videos that were created on the time-lapse

video feature in the User Interface. (see page #14 for creation instructions)

Camera Web Snippet

Click on the “Code Snippet” icon. This code is specific to each camera and when inserted into

any web page, it will display the most current image acquired by the camera. If a User clicks on

this image, it will open the User Interface and allow that User to view pictures and features but

not have the ability to alter any settings.

Once the User has clicked on an image on the Camera Console page, the software will open the

User Interface, which provides expanded features and controls for each individual solar powered

outdoor webcam.

Cellular Signal

This icon indicates cellular signal strength for the camera. Bandwidth available from cell tower

and provider varies throughout the day and picture-sending speed will vary upon available

bandwidth.

User Interface

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Eye Trax Sicherheitskamera Handbücher

Eye Trax

Eye Trax PREDATOR Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung